|
Title: Bricked 5970 XFX Black Edition Post by: seljo on August 13, 2012, 01:54:08 PM Need help, I flashed XFX 5970 2gb Black Edition with 1gb BIOS and now it's bricked. Getting cable unplugged warning on boot. Anyone got some exp resolving this any help will be appreciated.
Thx! Title: Re: Bricked 5970 XFX Black Edition Post by: 50BTC.com on August 13, 2012, 08:28:16 PM Get another card and try to use atiflash (http://www.techpowerup.com/downloads/2099/ATIFlash_3.95.html) on linux or dos. Guide to Video BIOS flashing (http://www.techpowerup.com/printarticle.php?id=34).
Title: Re: Bricked 5970 XFX Black Edition Post by: dizzy1 on August 14, 2012, 07:49:36 AM if atiflash doesn't see the card, you could try this http://www.techpowerup.com/forums/showthread.php?t=115240 (http://www.techpowerup.com/forums/showthread.php?t=115240)
Title: Re: Bricked 5970 XFX Black Edition Post by: seljo on August 14, 2012, 07:57:02 AM Cable unplugged warning is the problem, you can't get to any OS and flash it. BTW cables are plugged in and working.
Title: Re: Bricked 5970 XFX Black Edition Post by: d3m0n1q_733rz on August 16, 2012, 12:46:18 AM You need to install it as a second card and flash it with a FreeDOS utility.
This means you'll need a working card to boot your system with and the correct BIOS file. Title: Re: Bricked 5970 XFX Black Edition Post by: dmcurser on August 16, 2012, 12:49:07 PM if none of those work you need to look on youtube and on this forum there is a guy that had the same problem. he had to bybass the rom on the card to get it to boot to where he could reflash it to the right bios.but you got to atache wires here and there so.
Title: Re: Bricked 5970 XFX Black Edition Post by: 1l1l11ll1l on August 17, 2012, 05:42:42 AM Need help, I flashed XFX 5970 2gb Black Edition with 1gb BIOS and now it's bricked. Getting cable unplugged warning on boot. Anyone got some exp resolving this any help will be appreciated. Thx! Ah yes! I once flashed bios 1 to bios 2 and bios 2 to bios 1. Same error, no power connected and you can't get anywhere, even with a second card. Solution? Simple (hopefully for you too) I found a setting in my bios for "halt on error" (can't remember exactly) but basically, there was a setting in there that I could tell the system to completely ignore errors on boot (I think specifically from add on cards etc). Hope this helps! If not, PM me and we can work out you sending the card to me and I'll reflash it for ya. Good luck, give us an update if it works! Title: Re: Bricked 5970 XFX Black Edition Post by: seljo on August 17, 2012, 01:40:32 PM Need help, I flashed XFX 5970 2gb Black Edition with 1gb BIOS and now it's bricked. Getting cable unplugged warning on boot. Anyone got some exp resolving this any help will be appreciated. Thx! Ah yes! I once flashed bios 1 to bios 2 and bios 2 to bios 1. Same error, no power connected and you can't get anywhere, even with a second card. Solution? Simple (hopefully for you too) I found a setting in my bios for "halt on error" (can't remember exactly) but basically, there was a setting in there that I could tell the system to completely ignore errors on boot (I think specifically from add on cards etc). Hope this helps! If not, PM me and we can work out you sending the card to me and I'll reflash it for ya. Good luck, give us an update if it works! I'll try this as soon as I get home this sounds promising... hope it works! Title: Re: Bricked 5970 XFX Black Edition Post by: seljo on August 17, 2012, 02:08:20 PM Need help, I flashed XFX 5970 2gb Black Edition with 1gb BIOS and now it's bricked. Getting cable unplugged warning on boot. Anyone got some exp resolving this any help will be appreciated. Thx! Ah yes! I once flashed bios 1 to bios 2 and bios 2 to bios 1. Same error, no power connected and you can't get anywhere, even with a second card. Solution? Simple (hopefully for you too) I found a setting in my bios for "halt on error" (can't remember exactly) but basically, there was a setting in there that I could tell the system to completely ignore errors on boot (I think specifically from add on cards etc). Hope this helps! If not, PM me and we can work out you sending the card to me and I'll reflash it for ya. Good luck, give us an update if it works! I'll try this as soon as I get home this sounds promising... hope it works! Ok I tried with no errors bios setting and still didn't go pass YOU HAVE NOT CONNECTED THE POWER CABLE TO YOUR VIDEO CARD.PLEASE REFER TO THE 'GETTING STARTED GUIDE' FOR PROPER HARDWARE INSTALLATION. :( Title: Re: Bricked 5970 XFX Black Edition Post by: AndrewBUD on August 17, 2012, 02:09:16 PM a lot of cards have a little switch on the top, dual bios cards... wreck 1 bios you still have another.
Title: Re: Bricked 5970 XFX Black Edition Post by: crazyates on August 17, 2012, 02:28:28 PM a lot of cards have a little switch on the top, dual bios cards... wreck 1 bios you still have another. I thought that was only Gigabyte cards? Title: Re: Bricked 5970 XFX Black Edition Post by: pcexpress4less on August 17, 2012, 03:06:10 PM I had a similar problem where i was doing a remote bios 6950 to 6970 flash and flashed it to a 5970.No software flash utility would work in windows or in dos. I had to short the flash rom first. If you can't force flash it you will have to jump pin 1 to 8 on the flash rom. One is on the front of the card the other is on the back. Jump the pins on the flash rom for the bios you flashed. Here is a link that should get you back up and running.
http://www.techpowerup.com/forums/showthread.php?t=115240 Title: Re: Bricked 5970 XFX Black Edition Post by: AndrewBUD on August 17, 2012, 04:00:24 PM a lot of cards have a little switch on the top, dual bios cards... wreck 1 bios you still have another. I thought that was only Gigabyte cards? Lot's of card makers do it now. Title: Re: Bricked 5970 XFX Black Edition Post by: seljo on August 19, 2012, 08:15:23 PM No dual bios, can't boot any OS if the card is plugged, even hotplugged it in windows and nope no success...
Title: Re: Bricked 5970 XFX Black Edition Post by: goxed on August 19, 2012, 10:10:24 PM I can do the WRite enable (a.k.a. shorting) (using a professional soldering station) for you. The charge is $25, you pay 2-way shipping US only. No guarantees that the card will work after that, but I will do my best effort to re-flash / revive it.
PM me if interested. |