Title: What to do with Raspberry Pi 2? Post by: Hamuki on April 12, 2015, 06:56:05 PM Hey everyone.
I have a Raspberry Pi 2 and I dont really know what to do with it. The plan was to make it a node for the network.. But I kinda wanna do something else too. Something where it just sits and calculates data or something :P Got any ideas then please post below :P Title: Re: What to do with Raspberry Pi 2? Post by: Rmcdermott927 on April 13, 2015, 02:25:05 AM Build cgminer onto it and connect some USB miners?
Title: Re: What to do with Raspberry Pi 2? Post by: Sundark on April 13, 2015, 02:32:42 AM I found ideal solution for you! Just check it out, it is amazing what you could do with raspberry Pi 2: http://lifehacker.com/build-your-own-raspberry-pi-powered-weather-station-1697061082
Title: Re: What to do with Raspberry Pi 2? Post by: Lies on April 13, 2015, 12:55:34 PM I just ordered mine. I will put XMBC on it.
Title: Re: What to do with Raspberry Pi 2? Post by: Borisz on April 13, 2015, 03:20:50 PM Small webserver and/or mumble server, VPN or ssh tunnel, owncloud, etherpad are always good ideas.
You can also look into BOINC projects and Gridcoin or other POS coins where running a wallet 24/7 can get you some small interest. Title: Re: What to do with Raspberry Pi 2? Post by: DonQuijote on April 13, 2015, 03:57:47 PM Torrent, vps, node...
Title: Re: What to do with Raspberry Pi 2? Post by: ObscureBean on April 13, 2015, 04:29:50 PM It's not really powerful enough to be efficient for crunching data. I wanna get one as well at some point and I'm thinking of using it as a dedicated media center with one of my TVs. It's small and quiet and can easily be concealed. There's really a lot of stuff you can do with it if you think about it.
Title: Re: What to do with Raspberry Pi 2? Post by: Buffer Overflow on April 13, 2015, 08:41:21 PM Dedicated porn media center.
Title: Re: What to do with Raspberry Pi 2? Post by: bkora on April 13, 2015, 09:31:11 PM you can use this to mine coins by attaching some miners to this
its good for low cost startup mining Title: Re: What to do with Raspberry Pi 2? Post by: abacus on April 14, 2015, 12:00:09 AM You could use it to crunch old games data in a mini MAME cabinet. :)
Something like this: http://wiki.arcadecontrols.com/w/images/thumb/3/33/Mikes_Mini_Mame_Final.JPG/576px-Mikes_Mini_Mame_Final.JPG (pic from http://wiki.arcadecontrols.com/wiki/Mikes_Mini_Mame (http://wiki.arcadecontrols.com/wiki/Mikes_Mini_Mame)) Actually it doesn't use a Raspberry Pi, but you get the idea. Awesome! Title: Re: What to do with Raspberry Pi 2? Post by: kolloh on April 14, 2015, 03:45:41 AM Could use it as a clam staking machine or use it as media box as others mentioned.
Title: Re: What to do with Raspberry Pi 2? Post by: Rampton on April 14, 2015, 08:08:05 AM Keep it as a secure computer to keep your coins on. They'll likely be much safer on a pi than a windows computer.
Title: Re: What to do with Raspberry Pi 2? Post by: NicosKaralis on April 14, 2015, 07:38:35 PM i was considering using my to built a CI (continuous integration, run tests on every code change) visual interface...
But nah, I stopped with CI and now i have no use for it. Anyone have ideas that worth anything? I was even considering building a daft punk helmet with controllable display, but who knows, maybe someone has a better idea Title: Re: What to do with Raspberry Pi 2? Post by: manfred on April 14, 2015, 07:50:18 PM you can do this projects (and more) with the original
http://www.treehugger.com/slideshows/gadgets/20-awesome-projects-raspberry-pi-microcomputers/#slide-top (http://www.treehugger.com/slideshows/gadgets/20-awesome-projects-raspberry-pi-microcomputers/#slide-top) Title: Re: What to do with Raspberry Pi 2? Post by: JarvisTechnology on April 14, 2015, 10:34:17 PM I would stick with your plan and run a Bitcoin node on it just to strenthen the Bitcoin protocol even further
Title: Re: What to do with Raspberry Pi 2? Post by: beatleap on April 14, 2015, 11:06:24 PM Create a fallout pipboy..I remember reading this somewhere and it looked awesome it had all the stats like limbs damaged and everything. Raspberry pi are pretty powerful for such a little thing so I think it would be a good idea for a media center too because of the little power is uses
Title: Re: What to do with Raspberry Pi 2? Post by: Rmcdermott927 on April 16, 2015, 06:15:55 AM You could use it to crunch old games data in a mini MAME cabinet. :) Something like this: http://wiki.arcadecontrols.com/w/images/thumb/3/33/Mikes_Mini_Mame_Final.JPG/576px-Mikes_Mini_Mame_Final.JPG (pic from http://wiki.arcadecontrols.com/wiki/Mikes_Mini_Mame (http://wiki.arcadecontrols.com/wiki/Mikes_Mini_Mame)) Actually it doesn't use a Raspberry Pi, but you get the idea. Awesome! Abacus, have you built something like that before? I am trying to find a good source for a cabinet so I can build one for myself. Title: Re: What to do with Raspberry Pi 2? Post by: abacus on April 16, 2015, 09:37:41 PM Abacus, have you built something like that before? I am trying to find a good source for a cabinet so I can build one for myself. Nope, but I hope I will a day. It is on my TODO list from long time ago, just not much prioritary. About the cabinet, I think that a DIY approach could worth a try. The picture I posted shows a very nice finish of the wood and details like the plexiglass with backlight (the Mame logo), but I think that using some MDF, glue and black paint for the entire cabinet the work will be much easier and faster, even if not as pretty. Title: Re: What to do with Raspberry Pi 2? Post by: naypalm on April 17, 2015, 01:42:32 AM I am having my Pi 2 stream live video from my bee hive. I'd take pictures of it, but you know.. the Pi 2 is camera shy (https://nakedsecurity.sophos.com/2015/02/11/most-adorable-bug-raspberry-pi-2-crashes-when-you-take-a-photo-of-it/).
Title: Re: What to do with Raspberry Pi 2? Post by: Rmcdermott927 on April 17, 2015, 02:37:22 AM Abacus, have you built something like that before? I am trying to find a good source for a cabinet so I can build one for myself. Nope, but I hope I will a day. It is on my TODO list from long time ago, just not much prioritary. About the cabinet, I think that a DIY approach could worth a try. The picture I posted shows a very nice finish of the wood and details like the plexiglass with backlight (the Mame logo), but I think that using some MDF, glue and black paint for the entire cabinet the work will be much easier and faster, even if not as pretty. Cool, I just ordered the stuff to make a retropie. It's very cool because the pi 2 is capable of playstation games without any issues. I just haven't decided how to mount it. I just found this thing called the iCade and it seems like that might make a good cabinet candidate instead of doing the DIY thing. I don't know if it will be enough buttons for most psx games though. |