|
Title: Bitmain Antminer S3 on MAC OSX Post by: collins6542 on April 16, 2015, 05:41:47 AM Hey all,
I know the S3s are standalone.. i am having issues connecting with it to configure it... any suggestions? I went through Doges comprehensive guide but since i am running a different OS I was not able to follow 100%. Title: Re: Bitmain Antminer S3 on MAC OSX Post by: notlist3d on April 16, 2015, 06:14:15 AM OS has nothing stopping it from configuring S3. Are you able to access miner?
Title: Re: Bitmain Antminer S3 on MAC OSX Post by: collins6542 on April 16, 2015, 02:27:43 PM OS has nothing stopping it from configuring S3. Are you able to access miner? Thats what I am having difficulty doing is changing the subnet from 0 to 1. Title: Re: Bitmain Antminer S3 on MAC OSX Post by: HerbPean on April 16, 2015, 02:51:53 PM Plug a ethernet cable from your laptop to the miner directly.
In your laptop's network settings, configure your Ethernet card with a static ip in the same range subnet as your miner. Example: If your miner is at 192.168.1.99. Set your computer to something else 192.168.1.34 Now you will have access to your miner with your internet browser. Title: Re: Bitmain Antminer S3 on MAC OSX Post by: kpitti on April 17, 2015, 06:08:14 PM Plug a ethernet cable from your laptop to the miner directly. In your laptop's network settings, configure your Ethernet card with a static ip in the same range subnet as your miner. Example: If your miner is at 192.168.1.99. Set your computer to something else 192.168.1.34 Now you will have access to your miner with your internet browser. Yes this is correct. I was used MAC OSX with S3 last year. May be you have a difficulty to find networking settings in OSX. Open System Preferences and look for Network icon. On the left side choose Ethernet and there is a settings on the right side of panel. Just change the value in the Configure IPv4 from DHCP to manual address and put IP mentioned above. I recommend to switch your S3 for using DHCP and then switch back you Mac to DHCP too. Next time will work without any changes to network configuration. |