|
Title: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on August 24, 2012, 04:49:22 PM 9 of 25 available
Comes in sets of 6 @ 31 BTC per board (if you want 5 or less see my next post) Firmware: ztex or x6500 overclocker - each board uses about 18W at 400MH/s tml - Each board uses about 27W at 475+MH/s Included: + Shipping included in prices (USA only) + PCI-E to barrel power cables (Very high quality, made by forum member Cablez) Power 6 boards from single PCI-E connection! + Stacked using 2" plastic standoffs and 1" aluminum standoffs for the feet + Heat sinks with their fans + 24x 80mm fans for side air flow (All powered by a single Molex connector) + 1.5' USB cables with 90 degrees angled adapters + Extra thermal paste and adhesives + 12 port USB Hub (If you buy at least 2 stacks) + 750W Corsair PSU (If you buy all stacks) + https://i.imgur.com/UV4On.jpg (https://i.imgur.com/UV4On.jpg) + https://i.imgur.com/uZhhM.jpg (https://i.imgur.com/uZhhM.jpg) OTC Rating http://bitcoin-otc.com/viewratingdetail.php?nick=bonks (http://bitcoin-otc.com/viewratingdetail.php?nick=bonks) Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on August 24, 2012, 05:20:50 PM Looks like some people want fewer than 6 boards.
I'll sell each X6500 for 31 BTC. This includes shipping, heatsyncs with fans, usb cable, usb angled adapter, extra thermal paste and adhesives, and 1/2" aluminum standoffs. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: abracadabra on August 25, 2012, 04:28:44 PM #1 - Where are you located?
#2 - Are you willing to do a deal for BTC thru an escrow agent? Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on August 25, 2012, 06:51:21 PM #1 - Where are you located? #2 - Are you willing to do a deal for BTC thru an escrow agent? #1 - I'm in the SW USA. #2 - Yes Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: mrbashfo on August 25, 2012, 10:44:25 PM #1 - Where are you located? #2 - Are you willing to do a deal for BTC thru an escrow agent? #1 - I'm in the SW USA. #2 - Yes Where in the sw are you located? Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on August 25, 2012, 10:54:41 PM AZ
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: Cosmos on August 25, 2012, 11:30:38 PM Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: davecoin on August 28, 2012, 01:49:17 AM Received it today and it's already hashing. Thanks for the communication and fast shipping.
-Dave Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on August 28, 2012, 07:44:15 PM Received it today and it's already hashing. Thanks for the communication and fast shipping. -Dave You're welcome :) Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: RicRock on August 30, 2012, 04:52:02 AM Great Deal.
Really wish I had my FullTilt money now :-[ Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on August 30, 2012, 05:11:04 AM i will take 3 hopefully by the end of this week...
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: allinvain on August 31, 2012, 02:15:03 PM Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific.
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on August 31, 2012, 02:55:16 PM he was not willing to ship to canada, but i think he changed his mind. I will be going for 3 of them shipped to quebec, i am just waiting on some cash to come in.
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on August 31, 2012, 02:55:48 PM how many do you want to get? and what city are you located in, i am in montreal.
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: allinvain on August 31, 2012, 03:09:19 PM I'm not sure how many yet, but I'm located in Windsor - Ontario. I'm just a tiny bit closer to him.
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on August 31, 2012, 03:12:53 PM yes this is a great deal! plus i like this model and the icarus/lancelot versions because of all the responces and customer service, i dont like to wait like in the case of BFL units...
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: allinvain on August 31, 2012, 04:14:10 PM yes this is a great deal! plus i like this model and the icarus/lancelot versions because of all the responces and customer service, i dont like to wait like in the case of BFL units... True, these fpga boards are great. The icarus boards are nice too - perhaps a bit better as they can be more easily repurposed in case bitcoin folds. The only concern that I have is the possibility that BFL will deliver in Oct on their ASIC promise. If they do just one ASIC single is enough to decimate this entire x6500 rig :-\ Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: segabtc on August 31, 2012, 04:20:47 PM Trade a pre-order ASIC single for this setup????
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on September 07, 2012, 07:36:42 PM just bought 2...
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 07, 2012, 08:09:07 PM just bought 2... Thanks Max! Original post updated. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 07, 2012, 09:59:07 PM Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific. Hey I just shipped 2 to max in montreal via USPS Express mail. It was $45 with insurance to Quebec. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: allinvain on September 08, 2012, 04:34:09 AM Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific. Hey I just shipped 2 to max in montreal via USPS Express mail. It was $45 with insurance to Quebec. Ah ok. Thanks for the info. I'm thinking I will pass on this deal and get the new ASIC board from cablepair. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: Garr255 on September 08, 2012, 08:07:26 PM Looks like I'm a little late but +1 for bonks' reputability.
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 08, 2012, 08:12:06 PM Looks like I'm a little late but +1 for bonks' reputability. Thanks Garr I kinda needed it for the forums. Link to my OTC ratings are in the original post for those wondering. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: RicRock on September 08, 2012, 10:05:12 PM +1
not that mine counts for much but Bonks is a straight up guy Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: Michail1 on September 12, 2012, 04:40:21 PM +1
Bonks has them in stock. No need to wait for weeks to get your own FPGA mining gear. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on September 12, 2012, 06:09:00 PM Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific. Hey I just shipped 2 to max in montreal via USPS Express mail. It was $45 with insurance to Quebec. Just received them today, paid 160 in taxes...sigh... :'( hashing away as we speak. Thanks BONKS! Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 12, 2012, 06:15:33 PM Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific. Hey I just shipped 2 to max in montreal via USPS Express mail. It was $45 with insurance to Quebec. Just received them today, paid 160 in taxes...sigh... :'( hashing away as we speak. Thanks BONKS! Glad they got there promptly! But taxes? I specified them as gifts :/ Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on September 12, 2012, 06:24:48 PM next time we do it a different way... ;)
hey what size standoffs are you using? and where did you get those? Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on September 12, 2012, 06:46:41 PM 2 inches, saw in your other thread,
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 13, 2012, 04:35:06 AM next time we do it a different way... ;) hey what size standoffs are you using? and where did you get those? Darn, I should've gave you some. Sorry I wasn't thinking when I disassembled your boards. I got them from amazon.com http://www.amazon.com/gp/product/B00137U44Q/ Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: Garr255 on September 13, 2012, 04:57:12 AM How many do you need?
I have some metal (and more expensive) ones that belong to Cognitive that I could sell. I bought them from the user tgmarks in March. The added weight really helps with stability. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on September 13, 2012, 05:37:21 AM http://www.ebay.com/itm/130626750145?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
this is what i got. Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 15, 2012, 09:30:21 PM Price lowered!
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on September 21, 2012, 01:13:41 PM http://www.ebay.com/itm/130626750145?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 this is what i got. crap...too short...bonks i guess your not using the fans on the heat syncs? i should of went for taller... Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: Michail1 on September 21, 2012, 02:15:17 PM Just make them double high.
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: Garr255 on September 22, 2012, 01:26:43 AM http://www.ebay.com/itm/130626750145?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 this is what i got. crap...too short...bonks i guess your not using the fans on the heat syncs? i should of went for taller... Take the fans off of the heatsinks and put fans on the sides, like this: http://fpgamining.com/gallery/fizzisist I guess you could repurpose the heatsink fans to make up most of the side fans if you have an abundance of zip-ties and the patience haha! Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 27, 2012, 08:53:32 PM Updated original thread's hashrates since the TML bitstream was released and increases each board by about 75MH/s totaling to 475MH/s.
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: max in montreal on September 27, 2012, 08:55:07 PM is there a link somewhere with a how to?
Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on September 27, 2012, 09:02:23 PM is there a link somewhere with a how to? http://tricone-mining.com Latest from TheSeven: http://btcfpga.com/files/tml-1.11-mmq.jar java -Dstatus_port=1234 -Drecent_history_len=18000000 -Dclock_pin=fgg484.K20 -Dclock_pin_freq=100 -Davoid_reprogramming=true -jar ./tml-1.11-mmq.jar x6500:SERIALNUMBER http://user:pass@host:port/ Title: Re: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED Post by: bonks on October 08, 2012, 02:54:15 AM Dropped price to $400 or 34 BTC. Message me for other offers
|