|
Title: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: padrino on May 11, 2015, 02:43:38 AM Purchased for my kids and I about 6 weeks ago but things change and it's time to sell it.. My wife hurt herself and will be out of work for months so selling some things we don't absolutely need..
This printer was used for three prints, I received a new head from Lulzbot that will be included (unused) in addition to a number of filament reels since I had some plans for the printer. This package includes the printer itself with all original accessories, with the unused head included it's basically new... In addition numerous filament rolls, and replacement glass, PET film.. Everything needed to set things up and print... 9.25 BTC Shipped to the lower 48, international shipping available at cost.. Will also support Paypal sales.. LulzBot TAZ 5 3D printer and 24V power supply LulzBot Hexagon Hot End Tool Head with 0.35mm Nozzle Filament: Hatchbox ABS Filament - White (Used) Hatchbox ABS Filament - Black (Used) Hatchbox PLA Filament - Black (New) Lulzbot HIPS Filament - Green (New) Lulzbot HIPS Filament - Orange (New) Lulzbot HIPS Filament - Blue (New) Lulzbot HIPS Filament - Purple (New) Sainsmart Wood Filament (New) Additional Replacement Parts: 2 - 300mm glass 5 - PET Film Additional factory items that came with printer: Quick Setup Guide 4GB SD Card Filament Feed tube Toolkit bag 15 Piece Metric Hex Key Set Pliers, Needle Nose Tweezers Standard Precision Knife Dental Pick Flathead Bristle Brush Part Removal Knife (clam knife) Metric Ruler Complete documentation including a detailed manual with information for setup, downloading and using software, and starting your first print. Also includes an in depth manual on using Slic3r software https://farm9.staticflickr.com/8785/17322340660_4437581552_z_d.jpg https://farm8.staticflickr.com/7726/16889647253_2dabaaa203_z_d.jpg https://farm9.staticflickr.com/8716/16887388054_e532a04ddd_z_d.jpg Title: Re: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: padrino on May 12, 2015, 05:06:20 AM Bump
Title: Re: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: padrino on May 14, 2015, 03:08:00 PM Bump, toss offers this way if there is interest...
Title: Re: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: TECSHARE on May 14, 2015, 04:19:31 PM IMO your hopes for OVER full retail price are quite unrealistic. Even brand new there are models with similar specs for less than half of that price. If you want to sell this thing used you are going to have to take a hit (even if you didn't use it much), no way around it.
Title: Re: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: padrino on May 14, 2015, 06:51:44 PM IMO your hopes for OVER full retail price are quite unrealistic. Even brand new there are models with similar specs for less than half of that price. If you want to sell this thing used you are going to have to take a hit (even if you didn't use it much), no way around it. I listed it over full retail because of the additional filament, etc.. but that's why I pushed for offers, realistically because of selling prices in various places I know it will take a hit.. This is probably one of the worst communities for things like this because although there is plenty of interest there is also a do it yourself attitude which make things like this not as valuable.. Title: Re: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: TECSHARE on May 16, 2015, 04:12:43 PM IMO your hopes for OVER full retail price are quite unrealistic. Even brand new there are models with similar specs for less than half of that price. If you want to sell this thing used you are going to have to take a hit (even if you didn't use it much), no way around it. I listed it over full retail because of the additional filament, etc.. but that's why I pushed for offers, realistically because of selling prices in various places I know it will take a hit.. This is probably one of the worst communities for things like this because although there is plenty of interest there is also a do it yourself attitude which make things like this not as valuable.. IMO you could sell it here, but you would have to go at least 20% under retail (even with the extras) to even get a few bites. Just my opinion. Title: Re: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: notlist3d on May 17, 2015, 08:48:10 AM IMO your hopes for OVER full retail price are quite unrealistic. Even brand new there are models with similar specs for less than half of that price. If you want to sell this thing used you are going to have to take a hit (even if you didn't use it much), no way around it. I listed it over full retail because of the additional filament, etc.. but that's why I pushed for offers, realistically because of selling prices in various places I know it will take a hit.. This is probably one of the worst communities for things like this because although there is plenty of interest there is also a do it yourself attitude which make things like this not as valuable.. IMO you could sell it here, but you would have to go at least 20% under retail (even with the extras) to even get a few bites. Just my opinion. Sadly a lot of hobbies you do not get your money back out off. This is especially with hobbies that have huge improvements in models. I mean your competing against other models such as -http://store.hackaday.com/products/bukito-portable . Title: Re: [WTS] Lulzbot TAZ 5 3D Printer Package Post by: padrino on May 17, 2015, 07:45:15 PM IMO your hopes for OVER full retail price are quite unrealistic. Even brand new there are models with similar specs for less than half of that price. If you want to sell this thing used you are going to have to take a hit (even if you didn't use it much), no way around it. I listed it over full retail because of the additional filament, etc.. but that's why I pushed for offers, realistically because of selling prices in various places I know it will take a hit.. This is probably one of the worst communities for things like this because although there is plenty of interest there is also a do it yourself attitude which make things like this not as valuable.. IMO you could sell it here, but you would have to go at least 20% under retail (even with the extras) to even get a few bites. Just my opinion. Sadly a lot of hobbies you do not get your money back out off. This is especially with hobbies that have huge improvements in models. I mean your competing against other models such as -http://store.hackaday.com/products/bukito-portable . That is a good printer as well, much smaller print bed but solid option for the hobbyist that wants to build it themselves... |
