|
Title: Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC Dead? Post by: wolverine5pl on June 01, 2015, 11:18:29 PM Purchased Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC.
Received it today. Plugged it in. and.... No devices running No pools loaded Tried setting it up. rebooting even different images. On one image I go pool up and connected but still No devices running. Is my MIner dead? got it on ebay so dont know what to do. guy said it was working fine before he sended to me http://i59.tinypic.com/2qdvg1y.png http://i62.tinypic.com/15n55q0.jpg this I get when jumping on raspberry using ssh and manually starting cgminer http://i62.tinypic.com/2nkhn9j.png Please anyone can advice what to do?? Title: Re: Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC Dead? Post by: Zich on June 02, 2015, 12:38:14 AM Purchased Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC. Received it today. Plugged it in. and.... No devices running No pools loaded .......... this I get when jumping on raspberry using ssh and manually starting cgminer http://i62.tinypic.com/2nkhn9j.png Please anyone can advice what to do?? Why did you start with A1 parameter? A1 is sha256 miner while A2 is scrypt miner. A2 is for altcoin. Title: Re: Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC Dead? Post by: notlist3d on June 02, 2015, 05:38:38 AM Biggest advice is to check the PSU. It appears you have one of the painful ones you need to unscrew PSU to see it. But on PSU it has a 240/120 switch. Make sure it's on right ones. I have seen one kill a PSU even on wrong setting.
After that check connections. And I would get a different SD card and try a different image that you know works. If does not work ask more questions to ebayer. Might even have him remote in with teamviewer to see what is going on. Title: Re: Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC Dead? Post by: wolverine5pl on June 02, 2015, 08:44:09 AM So what command should i use for cgminer?
Psu was replaced on this one. Came with hp server psu Title: Re: Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC Dead? Post by: Zich on June 02, 2015, 09:02:23 AM So what command should i use for cgminer? Psu was replaced on this one. Came with hp server psu I don't know what is A2 command set. But the one you put is A1 setting. Maybe you can post miner & setting page. Title: Re: Innosilicon A2 Mini Scrypt Miner 29 Mh/s ASIC Dead? Post by: emdje on June 04, 2015, 08:47:19 AM So what command should i use for cgminer? Psu was replaced on this one. Came with hp server psu I don't know what is A2 command set. But the one you put is A1 setting. Maybe you can post miner & setting page. The software that Innosilicon used for the A2 is basically the same as they used for the A1. They just forgot to change all instances of A1 to A2, firmware is for A2 and should work. But as Wolverine5pl stated in a different topic, his blades are working now, were loose resistors due to transport: https://bitcointalk.org/index.php?topic=672969.msg11513791#msg11513791 |
