Title: Buying S5 from Bitmain Batch Post by: Fear58 on June 06, 2015, 10:43:52 PM Hi
I'm new to the world of bit mining hardware, and want a relatively decent miner for hobby. Looking at geting ths Antminer S3 or S5. If I buy from the Bitmain "Antminer S5 Batch 5", do I like wait until they meet a sell count threshold, or do they ship next business day? https://bitmaintech.com/productDetail.htm?pid=00020150303095018716e2uWKIA70662 Im skeptical about the S5 because I live in a room share in california where its warm in the summers, and apparently the S5 is NOISY. Is there a fan i can buy at frys to make this thing a whole lot less noisy (I think I could deal with heat generated)? The alternative is buying an Antminer S3 on Ebay. Significantly less GH/s but im okay with this, as it will primarily be for hobby. And it doesn't seem to have the same noise issues as the S5? Insights are welcome Thanks for all wisdom. Title: Re: Buying S5 from Bitmain Batch Post by: toptek on June 06, 2015, 10:56:47 PM Hi I'm new to the world of bit mining hardware, and want a relatively decent miner for hobby. Looking at geting ths Antminer S3 or S5. If I buy from the Bitmain "Antminer S5 Batch 5", do I like wait until they meet a sell count threshold, or do they ship next business day? https://bitmaintech.com/productDetail.htm?pid=00020150303095018716e2uWKIA70662 Im skeptical about the S5 because I live in a room share in california where its warm in the summers, and apparently the S5 is NOISY. Is there a fan i can buy at frys to make this thing a whole lot less noisy (I think I could deal with heat generated)? The alternative is buying an Antminer S3 on Ebay. Significantly less GH/s but im okay with this, as it will primarily be for hobby. And it doesn't seem to have the same noise issues as the S5? Insights are welcome Thanks for all wisdom. S3 for a hobby if you want it quiet , unless you want to mod the S5 to be quiet but if your not to worried about ROI or anything at all S 3 for fun and hobby . S3 are very quiet and much cooler then the S5 but if its hobby you can buy two water blocks http://shop.syscooling.com/goods.php?id=47 and then build a water cooling kit off ebay cheap. Title: Re: Buying S5 from Bitmain Batch Post by: Vorta on June 06, 2015, 10:59:22 PM Hi I'm new to the world of bit mining hardware, and want a relatively decent miner for hobby. Looking at geting ths Antminer S3 or S5. If I buy from the Bitmain "Antminer S5 Batch 5", do I like wait until they meet a sell count threshold, or do they ship next business day? https://bitmaintech.com/productDetail.htm?pid=00020150303095018716e2uWKIA70662 Im skeptical about the S5 because I live in a room share in california where its warm in the summers, and apparently the S5 is NOISY. Is there a fan i can buy at frys to make this thing a whole lot less noisy (I think I could deal with heat generated)? The alternative is buying an Antminer S3 on Ebay. Significantly less GH/s but im okay with this, as it will primarily be for hobby. And it doesn't seem to have the same noise issues as the S5? Insights are welcome Thanks for all wisdom. S5's fan is noisy. You can find some fans that might cool your S5 with less noise. At stock clock, S5 generates considerable amount of heat and requires a lot of airflow to dissipate it. A lot of airflow = a lot of noise. I've read about some people underclocking their S5 to have it's fan working at lower RPM. If you go to 0:20 of this video, you can hear how loud the original fan is compared to 2 Scythe Ultra Kaze fans: https://www.youtube.com/watch?v=eBtvmuRuuHo How would you deal with generated heat? AntMiner S5 is pretty much like a 500+W electric heater. Title: Re: Buying S5 from Bitmain Batch Post by: toptek on June 06, 2015, 11:29:27 PM One or two that others have tested that work
http://www.amazon.com/gp/product/B00A460TK6?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 http://www.amazon.com/Bearing-Cooling-NF-P14r-redux-1500-PWM/dp/B00KF7QO2G i would say for really quiet you need two fans doing at least CFM 131 each at stack speeds in push pull and if heat won't mater then get two really quiet fans and the S5 . Title: Re: Buying S5 from Bitmain Batch Post by: philipma1957 on June 06, 2015, 11:38:29 PM Hi I'm new to the world of bit mining hardware, and want a relatively decent miner for hobby. Looking at geting ths Antminer S3 or S5. If I buy from the Bitmain "Antminer S5 Batch 5", do I like wait until they meet a sell count threshold, or do they ship next business day? https://bitmaintech.com/productDetail.htm?pid=00020150303095018716e2uWKIA70662 Im skeptical about the S5 because I live in a room share in california where its warm in the summers, and apparently the S5 is NOISY. Is there a fan i can buy at frys to make this thing a whole lot less noisy (I think I could deal with heat generated)? The alternative is buying an Antminer S3 on Ebay. Significantly less GH/s but im okay with this, as it will primarily be for hobby. And it doesn't seem to have the same noise issues as the S5? Insights are welcome Thanks for all wisdom. you want the s-3 from ebay add this fan as a pull fan http://www.amazon.com/Silverstone-Cooler-Computer-Cooling-FHP-141/dp/B00A460TK6/ref=sr_1_1?ie=UTF8&qid=1433633597&sr=8-1&keywords=silverstone+141 set the freq to 206 or 212 vs 218 or 225 it will hash at 420gh and be quiet it will pull 310 watts not crazy hot. do what I do split the hash. into 3 pools I do ⅔ at btcguild which earn steady coin I do ⅓ at solo.ckpool.org which is all or nothing. meaning a 25 coin block or 0 http://imagizer.imageshack.us/v2/1024x768q90/540/ggLNiI.png Title: Re: Buying S5 from Bitmain Batch Post by: quakefiend420 on June 07, 2015, 12:24:57 AM No experience with the S5s, so I can't speak to them, but I have some S3s available if you're interested. Fairly quiet. Can likely beat eBay pricing too. And I have platinum server PSUs available if you need a power supply, too.
PM me if you want, I have 4 left right now. Title: Re: Buying S5 from Bitmain Batch Post by: alh on June 07, 2015, 02:21:21 AM How quiet are the platinum server PSU's? While I know they are reliable and efficient, I have this impression that they are usually quite noisy with the little whiny 40mm fans. I ask only because it would be a shame to get a relatively quiet miner coupled to a noisy PSU.
Maybe my impressions of a server PSU are just obsolete? Title: Re: Buying S5 from Bitmain Batch Post by: tss on June 07, 2015, 03:54:53 AM im using hp dps-800 server supplies. normally they run super loud but you can tell the ps to run the fan at low speed which is very quiet. they havent failed yet after several months of running 2 s3's each.
Title: Re: Buying S5 from Bitmain Batch Post by: notlist3d on June 07, 2015, 04:04:06 AM If your wanting a quiet PSU I might suggest looking at the RM series. Depending on model and load it adjusts fan speed.
I have had good luck with RM1000's but for 1 S3 would be a little overkill. Title: Re: Buying S5 from Bitmain Batch Post by: quakefiend420 on June 07, 2015, 04:19:55 AM How quiet are the platinum server PSU's? While I know they are reliable and efficient, I have this impression that they are usually quite noisy with the little whiny 40mm fans. I ask only because it would be a shame to get a relatively quiet miner coupled to a noisy PSU. Maybe my impressions of a server PSU are just obsolete? Depends on the load and ambient temp. Once you get them above 7-800w or so they can get loud(especially if the ambient temp is high), but at lower loads they're actually surprisingly quiet(more so than I expected, honestly). I run them at 73-77F intake temp. Title: Re: Buying S5 from Bitmain Batch Post by: philipma1957 on June 07, 2015, 04:23:18 AM How quiet are the platinum server PSU's? While I know they are reliable and efficient, I have this impression that they are usually quite noisy with the little whiny 40mm fans. I ask only because it would be a shame to get a relatively quiet miner coupled to a noisy PSU. Maybe my impressions of a server PSU are just obsolete? Depends on the load. Once you get them above 7-800w or so they can get loud, but at lower loads they're actually surprisingly quiet(more so than I expected, honestly). yeah I have the platinum one from http://www.gigampz.com/store/p21/Gigampz_80Plus_Platinum_Efficiency%2C_1200_Watt_Kit.html it is okay up to 800 watts. noise wise that is personally if you find a deal on the evga 1300 g2 it runs 1200 watts with not much problem. that is 3 s-3's or 2 s-5's at standard clocks. Title: Re: Buying S5 from Bitmain Batch Post by: Rabinovitch on June 07, 2015, 04:58:29 AM Looking at geting ths Antminer S3 or S5. Sure S5 is your choice. To reduce the noise you can buy 2 less noisy fans. Many of people here prefer Delta fans, but you are not limited here with this vendor; you can compare a characteristics of Delta fans here (http://delta-fan.com/) to start - look for fans like AFB1212HHE-TP02, AFB1212VHEX01 (a little more noisy). Also do not forget that S5 cooling probably need to be modified. New S5s sometimes content little radiators from "external" side of PCB, where the little copper plates are placed. These are the right place for BM1384 chips to dissipate heat from. https://forum.bits.media/uploads/monthly_05_2015/post-21709-0-65428300-1432720290.jpg The plates marked with little red circles (the picture is not mine) are without radiators. With such little radiators the hashing blade became cooler, so the controller reduces fan's speed, which lead to noise reduction. You are free choosing the radiators, but their base dimension should no exceed the dimension of that copper plate. For the safety reason. Title: Re: Buying S5 from Bitmain Batch Post by: goxed on June 08, 2015, 03:18:58 PM Looking at geting ths Antminer S3 or S5. Sure S5 is your choice. To reduce the noise you can buy 2 less noisy fans. Many of people here prefer Delta fans, but you are not limited here with this vendor; you can compare a characteristics of Delta fans here (http://delta-fan.com/) to start - look for fans like AFB1212HHE-TP02, AFB1212VHEX01 (a little more noisy). Also do not forget that S5 cooling probably need to be modified. New S5s sometimes content little radiators from "external" side of PCB, where the little copper plates are placed. These are the right place for BM1384 chips to dissipate heat from. https://forum.bits.media/uploads/monthly_05_2015/post-21709-0-65428300-1432720290.jpg The plates marked with little red circles (the picture is not mine) are without radiators. With such little radiators the hashing blade became cooler, so the controller reduces fan's speed, which lead to noise reduction. You are free choosing the radiators, but their base dimension should no exceed the dimension of that copper plate. For the safety reason. Do you have an ebay link for these heatsinks / radiators? I would be interested in these. My S5s fans have their ar$es on fire since summer started. Title: Re: Buying S5 from Bitmain Batch Post by: Rabinovitch on June 08, 2015, 04:26:10 PM Do you have an ebay link for these heatsinks / radiators? I would be interested in these. My S5s fans have their ar$es on fire since summer started. It's a picture of S5 shipped by Bitmain (Sic!). I was expected my S5 will arrive with such radiators too... >:( Take dimensions of copper plates where you'll glue the radiators and dig the Internet - e-bay, AliExpress, Dealextreme.... p.s. I'll take care of it some day soon, you may just wait a day or two. ;) Title: Re: Buying S5 from Bitmain Batch Post by: spazzdla on June 08, 2015, 08:24:48 PM DO
NOT BUY AN S5 FROM ANYONE BUT BITMAIN!!!!!! You'll get it in 2 weeks utter utter tops. I have orded 3 times from them all with in a week, the batch is just like the batch they made. THey don't wait until x amount are ordered, you order 1 S5 you get one ASAP. I would highly recommend using Kijiji for an S3 or Bitmain for an S5. I am running two S3's both have been running straight for over a year :). I also have an S1 that has been running full blast for about 1.5 years. I think you'll make an ROI if you buy an S5. Title: Re: Buying S5 from Bitmain Batch Post by: NotFuzzyWarm on June 08, 2015, 11:14:36 PM Do you have an ebay link for these heatsinks / radiators? I would be interested in these. My S5s fans have their ar$es on fire since summer started. It's a picture of S5 shipped by Bitmain (Sic!). I was expected my S5 will arrive with such radiators too... >:( Take dimensions of copper plates where you'll glue the radiators and dig the Internet - e-bay, AliExpress, Dealextreme.... p.s. I'll take care of it some day soon, you may just wait a day or two. ;) Always use a thermal epoxy so they stay put. Just a small dollop per sink is all that is needed. Also conducts heat better than thermal tape. |