Bitcoin Forum

.

Better a new thread...

int64_t GetProofOfWorkReward(int64_t nHeight, int64_t nFees)
{
    int64_t nSubsidy = 8 * COIN;
    
    if (nHeight == 1)
    {
      nSubsidy = 20001000 * COIN;
   }
      
    LogPrint("creation", "GetProofOfWorkReward() : create=%s nSubsidy=%d\n", FormatMoney(nSubsidy), nSubsidy);

    return nSubsidy + nFees;
}


20million premine with block reward of 8 coins

watch how the hashrate will go to 0 because the dev doesn't say a word about that premine

80000 coin for all the miners
20000000 coins for the dev

looks like inovation 25000% premine

Way to make this look like a NEW coin launch when it obviously is not.  Suck it dev.

ok thanks for sharing it
but i don't care anymore
shitcoin again

This about sums up the state of crypto these days. A fools den, better stick to the oldies that were created when things were pristine.

"There is a premine of 20001000 CYPT for the Proof Of Burn Phase that will be initiated @ 3 AM IST, The remaining will be burnt."

When and how  to swap XNA in rDNA in XCYPT ?

I will wait

Wat ?

so why 20M premine ?

after you burned few millions rDNA, 20M premine should be enough for a 1:1 ..

The mixure of the algorithms looks very interesting. I will keep an eye on the coin.

rdna sent along with email  8) didn't really know when to capture the screenshot so did 2

edit email failed too large removed first image, failed again

failed 3 times pm sent ...

wallet rDNA no sync  ???

taiga use 2.3.0 wallet XNA with nodes i have posted in XNA OP.

hi dev,

i don´t understand...

become thx for PoB XNA --> CYPT this is a GOOD IDEA!!!

1-but do you have decide to abandon XNA coin for CYPT?
2-what is the change XNA --> CYPT?

cheers,
smic

you said 20million premined coins but currently there 25million in supply on xna so how will it work with 1:1

PoW Info: Last Block is 10000
PoW Reward: 8 CYPT, No Halving

So total coins in POW is 80,000.

Masternode Payment Requirements: 17259.22 CYPT

So you need 21% of POW coins to run masternode?!

The POW phase is a total waste. You could have skipped it and did your pre-mine in 1 block.

There's nothing here for new miners, just for old XNA-or-whatever holders.

No seed nodes on launch, source doesn't compile... Usual bull.

 niitassin if im not alowed to pm you please supply a different email address as its failed to send there 3 times

How much time is left until the end of the swap?

thankyou kindly  :)

Compiling for Mac now, but getting warning:

overflow in expression: result is 7766279631452452241920 with type 'long long' [Winteger-overflow] from main.h line 85: static const int64_t MAX_MONEY = 1000000000000 * COIN;

Just thought I'd let you know.

Just FYI, your total coin supply of 1 Trillion coins causes an integer overflow "like a boss" on line 85 of main.h (https://github.com/niitassin/CryptCash/blob/588adb16d29c0ef13830bbaab31f18c8dbbccd76/src/main.h#L85).

And to anyone compiling on Linux, it's Qt5. export QT_SELECT=qt5 is your friend unless it's your default version already.

Aside from that, Qt and headless compile on Linux (with only a few changes), which is nice. Anyone using Windows that wants a headless wallet, though, is out of luck because there's no makefile.

Edit: Ctgiant beat me to the overflow warning, but, yeah, you should take care of that.

Hey I did the proof of burn thing the way that the dev nitassin required people to do it so hopefully I will see my XNA coins transferred to CryptCash Coins by tomorrow at the latest :) Good luck nitassin :)

Well I just received a postmaster notification saying that the email I sent to the address nitassin gave in the proof of burn thread isn't an email and it was never delivered??? What's going on nitassin?
Here's my proof of burn proof right here right now so I can't lose my XNA conversion

Bitcointalkusername: NoobKidOnTheBlock
Old XNA address: XNwnNpaN52vLp9ZbJwtoemSMoJm49rMHjW
New CryptCash address : CUsW1f7g7qt623RpdkiSQMkWUhdjHhMBpp
TX id for proof of burn transaction: fb4031988982eb559494dfcadd8073588aa992ea1e29dad7e41956abfc3acb44

Amount of XNA sent to the burn address: 317065.00 XNA
Expected amount of CryptCash : 317065.00 CYPT

SCREENSHOT OF TRANSACTION:

http://i61.tinypic.com/213rzm1.jpg

how to connect the cryptcash wallet? or trjfgsjgnb
anyone interested in 500.000 rdnabosexna what ever it is... you can make Cryptocash from it :)
can't get a synced adress
0.00000020....
trow something on it 0.1 btc? 10 ltc? 1.000.000 GigaGrid Coin?

nitassin to Your e-mail is not sent
my proof of burn

Bitcointalkusername: deniska1982
Old rDNA/XNA Address: XMo4NFCuozUWrsLXHCHcew2HQH96cfHyUC
New XCYPT Address: CM27H6LGga57FDNStEPzNyJgcS8mKTzoqA
Transaction ID: d69b5e6402350fac3096352ae32072575829d15fdd13b03be5ae505b8412f7ad-000

Amount Sent: 901 100
Expected Amount: 901 100

http://storage3.static.itmages.ru/i/15/0612/h_1434079481_7056211_b73145fdff.jpg

Hey nitassin I sent you a PM mate :) and I also posted in this thread and the XNA thread regarding the email address for the proof of burn not working and sent all the exact same information that I sent in the email on the threads and in the PM I sent you so I can still receive my swap for the XNA coins mate :) Cheers

niitassin tell me when to expect my POB coins .

He says 24 hours in the thread he made (https://bitcointalk.org/index.php?topic=1087376.0) about Proof of Burn. So I'd assume sometime within 24 hours.

However, Taiga, you've sent in three separate PoB attempts which is against the rules. You should probably PM niitassin to take care of that.

I've only sent the one but the email that he provided doesn't work so I've PM'ed him with the proof that I sent my coins and posted my proof here in this thread and the XNA thread so I can't get funked out of my hard earned coins ;) Cheers

Looks promising watching this... gonna hit Exchanges?

http://s020.radikal.ru/i713/1506/94/cf988637ea62.png (http://www.radikal.ru)


ID òðàíçàêöèè: 694a0802726d354f99fcb89783fc467d4fc35090882e907c012f3b8bc2f54876-000

Yo niitassin did you get my proof of burn PM? I tried to email the email addy that was in the burn thread but it doesn't work

Niitassin - Can you confirm that the email address is working?

Yes but when I tried to send the email with all the proof that I burned my remaining XNA it sent me a delivery failure email right back saying that the email address doesn't exist mate :)  But I've sent you PM's and put all the proof necessary in this thread and the XNA thread so looking forward to getting my 317065 XCYPT sent to the address I provided to you mate which is CUsW1f7g7qt623RpdkiSQMkWUhdjHhMBpp but you already should know that with the PM I sent you ;) Cheers

In that case are you receiving the PoB mails? Especially mine :-)

emails do not go to this address 02935ur8q43tr@mailinator.com !!! nitassin my coins coming ? I wrote in this thread . why be silent .

Bitcointalkusername: deniska1982
Old rDNA/XNA Address: XMo4NFCuozUWrsLXHCHcew2HQH96cfHyuc
New XCYPT Address: CM27H6LGga57FDNStEPzNyJgcS8mKTzoqa
Transaction ID: d69b5e6402350fac3096352ae32072575829d15fdd13b03be5ae505b8412f7ad-000

Amount Sent: 901100
Expected Amount: 901100

http://storage3.static.itmages.ru/i/15/0612/h_1434079481_7056211_b73145fdff.jpg

you got TXID

чeгo?

lol patience peps

so I get it right, the coin will come ? just email depolyed , it is unclear what to do . wait then coins from You . thank you .

Same here. Dev give us some gmail address please.

If you really want to email him directly, he has an email address listed on GitHub (https://github.com/niitassin).

Meh I'm fine with the PM proof that I sent him and the proof I posted here and in the old thread and I even posted a screenshot of the email I "TRIED" to send to the proof of burn email addy he put in the proof of burn thread :) I trust niitassin to make sure that the people who provided the proper information their coins whether through the email or not :) Which is why I posted in both threads as well so everyone could see that I did what was asked ;) Cheers

CM27H6LGga57FDNStEPzNyJgcS8mKTzoqA

how could change the letter A in a ??? copy paste

To the XYPT wallet?

get peerinfo


07:19:20

[
{
"addr" : "45.63.64.81:55243",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107926,
"lastrecv" : 1434107943,
"bytessent" : 415055,
"bytesrecv" : 261169,
"conntime" : 1434049458,
"pingtime" : 1.36266400,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 148,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "70.72.236.5:51777",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107943,
"bytessent" : 452405,
"bytesrecv" : 411831,
"conntime" : 1434052065,
"pingtime" : 0.17712200,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 186,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "37.187.27.4:45443",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107952,
"lastrecv" : 1434107952,
"bytessent" : 319667,
"bytesrecv" : 237017,
"conntime" : 1434052364,
"pingtime" : 0.32075900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 188,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "193.90.105.180:50434",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107958,
"lastrecv" : 1434107959,
"bytessent" : 358837,
"bytesrecv" : 344795,
"conntime" : 1434056336,
"pingtime" : 0.24338800,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 250,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "74.77.15.47:35854",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107943,
"bytessent" : 446382,
"bytesrecv" : 363404,
"conntime" : 1434057730,
"pingtime" : 0.24728900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 0,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "108.40.13.187:56810",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107923,
"lastrecv" : 1434107943,
"bytessent" : 331525,
"bytesrecv" : 166333,
"conntime" : 1434064290,
"pingtime" : 0.12407900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 364,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "123.63.248.110:59155",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107944,
"bytessent" : 391550,
"bytesrecv" : 314225,
"conntime" : 1434076908,
"pingtime" : 0.40342400,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 408,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "37.59.21.58:25752",
"addrlocal" : "216.211.118.238:62231",
"services" : "00000001",
"lastsend" : 1434107956,
"lastrecv" : 1434107956,
"bytessent" : 68167,
"bytesrecv" : 289957,
"conntime" : 1434077693,
"pingtime" : 1.90887900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 535,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "37.193.137.154:62582",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107923,
"lastrecv" : 1434107943,
"bytessent" : 431099,
"bytesrecv" : 282629,
"conntime" : 1434077852,
"pingtime" : 0.25017900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 265,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "76.26.82.101:51420",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107943,
"bytessent" : 229975,
"bytesrecv" : 179321,
"conntime" : 1434081009,
"pingtime" : 0.22612000,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 586,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "101.175.8.107:25752",
"addrlocal" : "216.211.118.238:54668",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107943,
"bytessent" : 95125,
"bytesrecv" : 105407,
"conntime" : 1434084573,
"pingtime" : 0.31560300,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 640,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "86.152.132.133:57453",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107923,
"lastrecv" : 1434107943,
"bytessent" : 277831,
"bytesrecv" : 96892,
"conntime" : 1434087130,
"pingtime" : 1.09764900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 361,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "81.227.79.238:1512",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107923,
"lastrecv" : 1434107943,
"bytessent" : 157127,
"bytesrecv" : 88907,
"conntime" : 1434090128,
"pingtime" : 1.11711400,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 731,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "118.193.147.47:62589",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107944,
"bytessent" : 77676,
"bytesrecv" : 99998,
"conntime" : 1434091475,
"pingtime" : 0.99657200,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 746,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "212.17.40.234:54348",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107943,
"bytessent" : 113460,
"bytesrecv" : 58594,
"conntime" : 1434093137,
"pingtime" : 0.14824700,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 772,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "115.70.187.61:25752",
"addrlocal" : "216.211.118.238:50714",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107943,
"bytessent" : 56870,
"bytesrecv" : 76481,
"conntime" : 1434098691,
"pingtime" : 0.28212900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 858,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "89.218.128.209:55097",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107923,
"lastrecv" : 1434107943,
"bytessent" : 60587,
"bytesrecv" : 36875,
"conntime" : 1434101192,
"pingtime" : 0.69712200,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 897,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "81.28.217.134:38758",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107942,
"lastrecv" : 1434107943,
"bytessent" : 38582,
"bytesrecv" : 30955,
"conntime" : 1434103178,
"pingtime" : 0.27455500,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 928,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "104.37.187.210:56036",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107944,
"lastrecv" : 1434107944,
"bytessent" : 87158,
"bytesrecv" : 25366,
"conntime" : 1434104822,
"pingtime" : 0.55513600,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 855,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "95.91.228.202:22965",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107925,
"bytessent" : 12478,
"bytesrecv" : 22538,
"conntime" : 1434105475,
"pingtime" : 0.89271100,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 963,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "37.150.218.163:13607",
"addrlocal" : "216.211.118.238:25752",
"services" : "00000001",
"lastsend" : 1434107943,
"lastrecv" : 1434107943,
"bytessent" : 2161,
"bytesrecv" : 1885,
"conntime" : 1434107869,
"pingtime" : 0.55600800,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : true,
"startingheight" : 998,
"banscore" : 0,
"syncnode" : false
}
]

17:26:00

getpeerinfo


17:26:00

[
{
"addr" : "108.40.13.187:25752",
"addrlocal" : "37.150.218.163:57622",
"services" : "00000001",
"lastsend" : 1434108338,
"lastrecv" : 1434108338,
"bytessent" : 38136,
"bytesrecv" : 38224,
"conntime" : 1434104855,
"pingtime" : 0.33201900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 950,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "212.17.40.234:25752",
"addrlocal" : "37.150.218.163:57661",
"services" : "00000001",
"lastsend" : 1434108344,
"lastrecv" : 1434108344,
"bytessent" : 15818,
"bytesrecv" : 17567,
"conntime" : 1434104862,
"pingtime" : 0.22901300,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 951,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "101.175.8.107:25752",
"addrlocal" : "37.150.218.163:61240",
"services" : "00000001",
"lastsend" : 1434108265,
"lastrecv" : 1434108266,
"bytessent" : 7950,
"bytesrecv" : 10507,
"conntime" : 1434106104,
"pingtime" : 0.58803400,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 971,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "70.72.236.5:25752",
"addrlocal" : "37.150.218.163:65026",
"services" : "00000001",
"lastsend" : 1434108348,
"lastrecv" : 1434108348,
"bytessent" : 7891,
"bytesrecv" : 6242,
"conntime" : 1434107507,
"pingtime" : 0.52303000,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 992,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "37.187.27.4:25752",
"addrlocal" : "37.150.218.163:65492",
"services" : "00000001",
"lastsend" : 1434108274,
"lastrecv" : 1434108274,
"bytessent" : 1777,
"bytesrecv" : 4236,
"conntime" : 1434107673,
"pingtime" : 0.31901800,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 996,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "115.70.187.61:25752",
"addrlocal" : "37.150.218.163:13441",
"services" : "00000001",
"lastsend" : 1434108290,
"lastrecv" : 1434108290,
"bytessent" : 3973,
"bytesrecv" : 5817,
"conntime" : 1434107809,
"pingtime" : 0.42002400,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 998,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "81.28.217.134:25752",
"addrlocal" : "37.150.218.163:49914",
"services" : "00000001",
"lastsend" : 1434108290,
"lastrecv" : 1434108291,
"bytessent" : 2871,
"bytesrecv" : 1550,
"conntime" : 1434107930,
"pingtime" : 0.50502900,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 1000,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "81.227.79.238:25752",
"addrlocal" : "37.150.218.163:14863",
"services" : "00000001",
"lastsend" : 1434108312,
"lastrecv" : 1434108315,
"bytessent" : 297,
"bytesrecv" : 573,
"conntime" : 1434108310,
"pingtime" : 0.26401500,
"version" : 60020,
"subver" : "/CryptCashcore:1.0.1/",
"inbound" : false,
"startingheight" : 1005,
"banscore" : 0,
"syncnode" : false
}
]

Old rDNA/XNA Address: XMnGbfWr2TLQC3L29qHpvQ3zuE1ExPL77U
New XCYPT Address: CHc1b5aLqGthDSXWUY8YHkvUVajvhVLUgG

Transaction ID:
249b609e1773aa36bcf9e1d26efcfc6beed090d859a2c9a9019db085e06248f9

Amount Sent: 218510 XNA
Expected Amount: 218510 XCYPT

http://savepic.org/7374862.jpg

Hey Niitassin I know you are busy mate but if you could just acknowledge to me that you did receive my proof of burn stuff so I know that you did that would be pretty sweet mate ;) Cheers

K cool that's all I needed to hear ;) I shant bother you no more :D Just keep up the good work mate ;) I even mined some of these coins as well just for something to do while waiting to hear about the proof of burn lol Cheers

Niitassin, you did receive my proof of burn

Nitassin . new wallet is CM27H6LGga57FDNStEPzNyJgcS8mKTzoqA     in the end A ! thanks a lot  :)

My linux headless wallet crashes after some time and I have to restart it ..

Exchange?

Wallet crashes:

terminate called after throwing an instance of 'std::bad_alloc'
  what():  std::bad_alloc

please fix !

Exchange?

i feel cheated
didn't get new coin
new coin suck
should have sell old coin in exchange........ (probably dev is dumping my old coins in exchange now)

Just received my swapped coins :) Good job Niitassin! Keep it up mate and if there is a noobies guide to setting up a masternode with this coin I would love if someone could direct me through it ;)

Hey mate you think when you got a spare minute you could update the OP with a step by step masternode setup for the coin? I would love to finally own a masternode of a coin but haven't the slightest clue how to set one up lmao Cheers

one part received, thank

pool is up http://hashgoal.com/pool/XCYPT/

pool :stratum+tcp://hashgoal.com:3349
username:wallet address
pass:anything

lol.. is disabled already.. its crashing on my regular machine also btw..even without any coins

Got coins from swap.. Thanks

thank you very much nitassin for POB . everything is fine . please tell me I still have 30 000 xna .where to put them ? You ? where .

i have this error in PoB !!!! please help me. i have sent a transaction on c-cex for example and works!
http://s11.postimg.org/yucl4eisj/xnaerr.png

just got my coins ! also for me first time i can run masternode(s)
there are still 0 masternodes available on network...??

Niitassin!!! You you launch coin and say only once can be exchanged, I spend my time on you your money and can't be exchanged, a good reputation is hard to earn, but easy to lose, think again!

Coins receive thanks nitassin

std::bad_alloc usually indicates a memory overflow or that, somewhere, an iterator is trying to access an element outside of a container's index. It'll take quite a while to debug without other information. The debug log might help, but running cryptcashd through gdb and posting the information you get when it fails will definitely do some good.

waiting for the next swap  ;D

I have already introduced and not once  >:(

Is it just me or is the linux daemon a bit greedy. It rapidly consumes almost all my RAM - 3.8G

Sorry to throw this out there again but could someone help me with how I would go about setting up a masternode? I'm a total Noob with masternodes but wanna try setting one up with these coins ;) Cheers

In relation to Masternodes

OP = 17259.22 XCYPT
QT Wallet says 50000 XCYPT

so which one is it?

Well could you or someone who has experience with masternode please throw together a quick Noobies guide to setting up one nice and easy? I would love to see what all the masternode hub bub is about lol

Okay the one question I have is where do I get an IPv4 or Darknet address from that was always the problem that I had before with the built in wallet masternode systems lol Sorry that might be a really dumb question to most but I'm dead serious about this lol

There is an issue with the daemon, as soon as you enable staking it consumes memory big time. None of my other staking daemons use anywhere near as much. Leave staking off and it behaves. Also the wallet will not stop once staking has been enabled, it needs to be killed

Old rDNA/XNA Address: XNQxbdBCWPkpms5oJhGUDqS1E8PnBhXQQr
New XCYPT Address: CWFoSUtrywbZMzUb9ToKB6dfERr11E8ZTF

Transaction ID:
1c4b685f251b31818c6977c5a0158026241fa8d7ecdc01302004e4cc3216217f

Amount Sent: 310000 XNA
Expected Amount: 310000 XCYPT

https://i.imgur.com/z4lNowQ.png

Except that won't work because the daemon at least doesn't recognise FQDNs only IP addresses

Another bug:

cryptcashd masternode start
masternode input must have at least 15 confirmations

But log says:

CActiveMasternode::ManageStatus() - Input must have least 452 confirmations - 25 confirmations

Confirmed

It then crashes as soon as all memory and swap is used.

No, your client looks like it has a memory leak. Check to make sure you're calling delete for staking-relevant dynamic allocations.

Also, SeedBit's wallet works for staking without annihilating RAM, so it's probably not Quark's fault.

  No, actually I was going to buy more. My rig doesn't do Quark, so I'm having to rent. So, thanks for not judging me as a dumper prior to learning my background. (that was sarcasm too, BTW)
  Anyway, good luck with the exchange.

So badly then?

For Sure not.

Quark is not as heavy as x11 for example.

There is a memory Leak somewhere which needs to ne fixed but it does Not seem you care much :)

what was the wallet crash issue? my windows wallet work smooth...

Well I get this unless I use my IP address:

addr ***.***.net:9999
: Invalid -masternodeaddr address: ***.***.net:9999

***.***.net is my FQDN

He doesn't really care, this coin like deoxyribosed is his plaything

that is what i was waiting for to see if this coins works smoothly before converting coins. those that converted couldnt dump if they wanted to

With the XNA price in the toilet, would there be any benefit dumping?

My point was that the RPC result says one thing, but the debug log says something else.

I also have dynamic IP, but I have dyn.com service for mapping my domains. If it is working for you in GUI wallet then it must be a linux daemon bug. Please add to buglist

hope c-cex gives them time to withdraw coins/dump before deli sting. how many burnt so far

just saw burn list, damn someone has 3.2million coins just watching at the moment very shaky coin indeed

You really are quite a contemptuous person aren't you Niitassin? You hack away at whatever coin is source code of the day, and time and time again deliver a substandard product.

Not many people will run a masternode on a full windows desktop PC like you clearly do, the very least you can do is take onboard when people mention bugs to you, rather than just providing flippant replies.

If you don't know what you are doing then why not ask?

OK, no problem.

Old rDNA/XNA Address: XKpBKvcGUgud5L7A56rtiumPz8ZQTAXwve
New XCYPT Address: CeXFMA8UcSMYxjZ99eJBrAMsSk4QViNUvi

Transaction ID:
4f505e148db51e9388cf1fd0630e65bd8e8ec3981dd1a85ed66d59fdf99a03de

Amount Sent: 593130 XNA
Expected Amount: 593130 XCYPT

http://s019.radikal.ru/i635/1506/dc/59f32a62222e.jpg (http://www.radikal.ru)

WOW that was fast! :)  Thanks a lot! Ofcourse ll hodl.

coins from swap received  8)

Very efficient you are niitassin  :)

wallet running for a few minutes then consuming alot of ram and crashing

http://i58.tinypic.com/fadj68.png

doesn't appear to be anything useful in debug.log

oke
so i can hold my coins at C-cex and it will be come cryptcash?
Or can i also withdraw some amount to the burn adress.. without using a wallet?
i got a synced cryptcash wallet now :)

+1

Wallet running for a few minutes then consuming alot of ram and crashing, che for crap? ???

lol again

was mining this till I noticed the PoB Ratio was changed just now

was PoB Ratio: 100:1 when i started mining

now i see its 1:1

solo mining is fun but not that much fun

Well I can only report on what I see here.

1. Running with load of coins, wallet unlucking.. waiting to stake coins.
2. Other VM (windows box) setup for masternode. Just waiting for confirms.

No issues whatsoever

lol why did you change?

lol shit scam dev, miners ouut 9sat/coin 20mhs only got 70coin =630 sat/day for 20mhs
lol dev shit coin >:(
dna dead coin will be deader in this swapshit
this meant why i,mining this ,buy dna cheaper than mining, so the dev put all his coin in sell order

uhm i got a friend in the Netherlands wich i sended some xna bose's coins.
He does not know this...changing,, and jelling at me.

my qeustion how much time left for getting coins killozed.
not that i have to take a ride so fast? to get coins crypted, i hope i can learn it him by sending the treads out...:)
and buy up some more for other and get back the coin with a good price calculated by us all?
so it would be accepted for currency?...
there is still no price of swap calculated i think so for xcrYpt?and even not from xna...!

if you always had this pretense then why did you have 100:1 in the OP when the mining started?

you did say the coin swap will be held until all coins are swapped so why a competition?

Distribute unexchanged coins to miners via the pool? Or ask c-cex to do the swap

that woudnt be right either exchanged or burnt.

I'd be happy with burning them too.

nitassin how to setup masternode . i have 939 confirm ???

http://storage3.static.itmages.ru/i/15/0613/h_1434187068_6698770_05c30c37b9.jpg

http://storage4.static.itmages.ru/i/15/0613/h_1434187108_6862687_154c0029d4.jpg

That's me  ;D

How is rank determined?

can we make multiple nodes on same pc

How does that work then?

Also how do you see earnings from MN?

What is MN reward? And is PoS working yet?

Launched Now Masternode in my server!
Enjoy!

http://s10.postimg.org/b53gjd1yt/xcypt.jpg (http://postimg.org/image/b53gjd1yt/)

Been running my MN all day so far, nothing

still waiting on my POB request.  There also seem to be 2 others.  Please make sure to do those before setting up a competition.

Thanks

IT´S TRUE AFTER LAUNCH A MASTERNODE AFTER 5 TIMES WALLET CRASH!!!!

same here, still nothing...

Ok -- Resent to 02935ur8q43tr@mailinator.com

me too.. now i'm waiting

are you also implementing ring sigs

How about a decent PoS reward?

Old rDNA/XNA Address: XNQxbdBCWPkpms5oJhGUDqS1E8PnBhXQQr
New XCYPT Address: CWFoSUtrywbZMzUb9ToKB6dfERr11E8ZTF

Transaction ID:
59fbf08633eb4b8356c61dbbce5daceedff60e17771c70e8376a7eae89c6c870

Amount Sent: 422821 XNA
Expected Amount: 422821 XCYPT

https://i.imgur.com/84RFD7A.png

If you can't get the issue resolved, just let us know where to post or email to and we will.

Thanks

Edit: Thanks niitassin -- coins received!

awesome

https://i.imgur.com/NZ9tvC4.png

normal?

dev please check your email , I sent some XNA to PoB
txid: 274a9ae2f6ca3fd6ecd199ab2deaa288ff1e60c34f773de505fbd16389179439

thanks :)

+1. YES.

Nice dev maybe stupid quesion since this is first Quark algo i mined..
gonna hit any exchanges?

please dev when you launch NEW ALGO for Mining Input INFO about THIS in OP. ;)

Still no masternode rewards

Because staking does not work?

Old rDNA/XNA Address: XPtnwQs8suWkQJmB5qvmfUyMgm7UVkhzB9

New XCYPT Address: CJgPhnUu8D4ruJp4UoakAWE7d44wgsDYND

Transaction ID:a0af0e32c5973d6484784005587c73d9f7ea10391218acd31824927530fc4df7-000

Amount Sent: 10558 XNA
Expected Amount: 10558 XCYPT


http://s016.radikal.ru/i337/1506/d1/b690aff594f9.png (http://www.radikal.ru)


       
How many times  to write? >:(

You already received a Proof of Burn reward (CJgPhnUu8D4ruJp4UoakAWE7d44wgsDYND - 148620.0).
Niitassin clearly stated you are only allowed one burn in his rules: 1) You are only allowed to do it one request (https://bitcointalk.org/index.php?topic=1087376.0).
So I don't think he will send you anything else.

Edit: your sent amount isn't a multiple of 5 either, which he stated is necessary.

Is that a rule which throw the people? I ask to return my coin . people  8 mining behind the blog I don't want  give you 10000 thousand

Hey Niitassin my CryptCash-QT windows wallet was working fine for first day or two and then all of a sudden out of nowhere it gave me a runtime error and now I can't start it.  Everytime I try to start it, it will start syncing and then give me the same runtime error and close the wallet??? Any ideas mate?

how things going here?

Client runs fine for me.
One thing I will say in relation to masternodes is that I could just not get them running properly in the QT client.
Would start fine, but then shutdown after an hour or so..
Moved all the setting to cryptcash.conf and its been running perfect since.

So should I delete everything except my wallet.dat and download the wallet again and see if that fixes it? Because it worked perfectly fine no problems at all since I downloaded it and then like I said out of nowhere it gave me the runtime error and shutdown and now gives me that error everytime I try to open the wallet again

-do u have launched masternode with parameters -stake=0 -staking=0 ?
-do u have earnings with you masternode?
i think if niitassin don´t solve the stake error masternode not earning. my masternode is up about 24h and no problem no crash but stake is set to 0...

Hey I didn't have any masternodes set up yet or anything just the coins sitting in my wallet.  I even deleted everything except the wallet.dat and downloaded the wallet fresh and tried again and still keep getting the same runtime error

upload debug.log somewhere. very hard to check anything without it

how to run Masternodes a static IPs (home computer)

https://bitcointalk.org/index.php?topic=1087357.msg11602071#msg11602071
i have tested with dynamic ip and not works
when u launch wallet-qt add in line -stake=0 -staking=0 parameters or crash.
masternode not earnings at this time.
dev repair a bug in a day.

The way I setup mine, was create on in the QT Wallet first.
Get the address.

Move 17259.22 coinc to the added address

Then click "Get Config"

Copy/Paste that into the cryptcash.conf file
----------------------------------
rpcallowip=127.0.0.1
rpcuser=REPLACEME
rpcpassword=REPLACEME
server=1
listen=1
port=REPLACEMEWITHYOURPORT
masternode=1
masternodeaddr=121.17.40.234:9999
masternodeprivkey=adsasdadsadsasdajhdjkahsdkjhaskdjhVd4nSx6goPsD5yj6dpz
----------------------------------

Restart QT Wallet and works.


NOTE:I have port forwarding setup on my router to for all traffic on port 9999 --> this PC

I set up a block explorer for CryptCash -- xcypt.miningalts.com (http://xcypt.miningalts.com)

If I need the resources for the server I will take it down, otherwise I will keep it up.

and have you get any reward?

sorry snipsnop i don't understand this:
"The way I setup mine, was create on in the QT Wallet first. "
what you intend whit this phrase?

Thanks for this.

I just use the GUI. "My Crypt Nodes". click the create button, fill in details.
(Guess I could have done the same using dubug window or daemon)

Then did the above. Masternode has been running ever since without any problems. No rewards though, but think niitassin is looking at that.
(Possible POS issue)

This is correct - I just checked the code because I believe it's unfair ask someone to run a masternode without compensation.

There is currently code to pay masternodes in GetProofOfStakeReward() and none in GetProofOfWorkReward(). This means that until POS is fixed, no masternodes will be paid.

Edit:
Actually, looking into spork.cpp (https://github.com/niitassin/CryptCash/blob/069051b94eab05096c5df21a5e66cb3077e51b43/src/spork.cpp#L79-95), it looks like masternodes wouldn't be paid anyway because CBlock::CheckBlock() in main.cpp (https://github.com/niitassin/CryptCash/blob/069051b94eab05096c5df21a5e66cb3077e51b43/src/main.cpp#L2328-2353) sends IsSporkActive() the defines SPORK_1_MASTERNODE_PAYMENTS_ENFORCEMENT_DEFAULT and SPORK_1_MASTERNODE_PAYMENTS_ENFORCEMENT. Looking into those, (SPORK_1_MASTERNODE_PAYMENTS_ENFORCEMENT  = 10000) and (SPORK_1_MASTERNODE_PAYMENTS_ENFORCEMENT_DEFAULT = 2428537599) (https://github.com/niitassin/CryptCash/blob/master/src/spork.h#L21-35).

Because IsSporkActive() translates the former into the latter, we're really just looking at SPORK_1_MASTERNODE_PAYMENTS_ENFORCEMENT_DEFAULT. I think. I could be wrong.

If that is indeed the case, the wallet is comparing the current date against the "default" masternode UTC timecode to determine if masternodes should be started. Common sense says "check the comment to see what date that is". The comment suggests "2015-4-8 23:59:59 GMT". However, if you actually check the value, 2428537599 = Sun, 16 Dec 2046 01:46:39 GMT.

I don't really want to spend too much time looking into this issue, but if fixing POS doesn't fix masternodes, this is a great place to check.

Why have the details about PoS rewards been removed from the 1st post?

feels like this has been abandoned

lol nah

by dev not community. community abandonment takes longer

I honestly cannot figure out my windows-qt wallet because I've deleted everything and downloaded everything over again and it still keeps crashing giving me a runtime error??? Like if anyone knows anyway that I can fix this problem I am all ears!! Also is there a certain .conf file for this coin and if so would someone ever be so kind as to post their .conf file for me so I can make one ;) Cheers

Here is mine, obviously I've removed my password and masternode  info

Thanks mate appreciate that I'm going to see if that helps with the wallet or not :) Cheers

niitassin  IS the dev ;) + he said couple of days to fix bugs

I sent this to  02935ur8q43tr@mailinator.com as per instructions but it bounced.

BitCoinTalk User Name: shojayxt

Old rDNA/XNA Address: XTbKoYDoRKWC3JQBayAJ1TWFcDCqosoHC3 , XGxm23PpgXCg2dWeUm8xPyrUhxkV9hri3J
New XCYPT Address: CZVD9bQkydwkAGNUCAs5U7CP7yqtKTF8o5
Transaction ID: d3917889203b887e77536025eca0ee369bc6c7eeef05ddfd79543929bc42acc8

Amount Sent:841020 XNA
Expected Amount: 841020 XCYPT

http://s25.postimg.org/wgr7c6b6n/Rdna_Burn_Screen.jpg

Wow another Nitassin fail coin.   ::)

will he make new coin. dev is talented though those that swapped cant dump

any news about PoS?

Welcome back. What's in the update?

^ Will not compile past this point by the way

another dev lol of the year
waiting ur new swapped coin

:D RIP sOOn

a new wallet is not synchronized  ???

So the only exchange hosting XCYPT is EmpoEx right now? We need to get on bigger exchanges people!!

Because dev doesn't test his code

not sync.

crypt now listed on empoex

Lol at the 25-30k asking price

Can you remove all that haval shit as well? It's making the daemon not compile

what happen to the xna coins that were on empoex on sell side.

Regardless niitassin it is causing the code not to compile

People probably removed them so that they could burn them for XCYPT

Good work, compiling now

I've been messaging Yobit to add this coin but haven't heard anything from them yet

to nitassin in regards to the coins on c-cex you can ask them to perform a swap for any existing coins on their exchange and the users wallets will be updated. wocx coins were swapped for woc2. you can ask support how many coins in total are on their exchange and they will perform the swap

much easier and efficient for you

support is online now

spoke with c-cex support they said if you want to do it contact them via skype cicecx

verify the skype address from trollbox so you know its the exchange

well that remove any complaints afterwards of not being aware of swap as most likely majority of coins are on the exchange

Linux daemon still does not compile:


If you want exchanges to keep up with your coin, it is essential for the daemon to compile

no interest on exchanges

I'm unable to compile on Linux as well.

One of the reasons the Qt wallet doesn't compile on Linux is because Niitassin undid one of the changes that I made to the Qt pro file. No idea why. The other reason is that he didn't include hamsi_helper.c. I think I have that version compiling, but I'm going to do a clean build after I make sure it's not going to implode as is.

I haven't looked at the headless wallet yet, but I'll check it out after I'm done with the Qt clean build (as long as the logs look good).

Edit: the logs don't look good. He changed something that makes all previous blocks appear to be orphaned.

Edit 2: I can't even figure out what the bad change was because Niitassin's important commits changed far too many things at the same time for me to make sense of them. So I'm not going to waste my time trying to fix this - I'm calling it dead.

thats that then

all people is waiting for new wallet...

+1  :-\

are people having trouble sending their coins to empoex

There are no buys anyway

dev comes online no updates dev 2-3 days. what was the point of making people change their coins. only one order on empoex

update/new wallet that works?

Welcome back from the dead. Will the daemon compile issues also be resolved?

go back to which old version. will downloading the new wallet update solve the crisis

Can you at least fix PoS so we can see if masternodes are working?

not sync   ???

is not funny . 20th non-working wallet . the coin is already dead

No POS / No Masternode / No Buys

why is it telling me i need to sign in github.

i just clicked on the link

also this wallet you released have you tested if pos masternodes work

Any working nodes?

for me not syncing.... :-(

No me neither, I presume this is going to grind to a halt at block 10000 without any working PoS to help the chain along

for me, too . so I think for all

want to start promoting this coin but not without a working wallet

I'd tweet it about too, my followers would love some of this. Needs a few things though:

1. Working PoS
2. Dev needs to stop fiddling with it every ten minutes.

yes if we get past this and dev successfully incorporates ring sigs with it this should be a good ride but updates after updates aint really so good. let see how this version goes

You're using Git... I've always wondered why you don't fiddle in a testing branch. Grab yourself a group for testing on testnet and fiddle there, perhaps?

You may be able to stake, but syncing from zero still orphans every block, from what I can see. (http://pastebin.com/9u9RzXeG (http://pastebin.com/9u9RzXeG))

Also, there's an issue with main.h under Linux because G++ is angry about a lack of parentheses around one of the if statements' arguments. (main.h, line 693 (https://github.com/feldenthorne/CryptCash/blob/bb8fcd50a1dbd97264bb5094681260de71ad593e/src/main.h#L693))

Yup linux daemon broken again:

downloaded new wallet just says catching up processed 0 blocks yet

0 connections

when masternode & POS will work?

Wallet v1.0.1.0-g32a928e no sync  ???

actually hold on it just synced i didnt have to delete anything

they key ingredient was patience

will test masternodes need some cryptcash.

dev did you talk to c-cex about swap

got 12 connections and i see one masternodes

so i shouldn't try nodes until 20th

and how about ccex coin swap

will ccex be doing the swap or we still doing it the way by sending coins to you

how many coins been burnt

Why regret?

There are a couple of extra v's floating around in this: cryptcash.conf (https://github.com/niitassin/CryptCash/blob/d7951d2df81f1aa8701e8f50f4184881b984f3cf/contrib/fastr/cryptcash.conf).

my wallet works just need some cryptcash coins id prefer if ccex just swap coins makes it easier

and i am asking again

did you contact c-cex about a coin swap for the xna coins there

It's time to Exchange  XCYPT

My wallet is not syncing despite trying the files in the contribs folder. Anyone else?

dead coin?

My wallet synced ok no problems

Maybe I'll try pulling a fresh copy of the source and giving that a go

Only if you answer my question that did you contact ccrx about the swap rather than swapping the currency  the current way

http://s18.postimg.org/66zpacm4p/image.png

http://s18.postimg.org/dzqd2bs3p/image.jpg (http://postimg.org/image/dzqd2bs3p/)

NOT SYNC AFTER BLOCK 10000
see full image

Yes, PoW ended at 10000. PoS not working so chain has stopped

https://cypt.suprnova.cc/index.php?page=statistics&action=pool

No blocks for over 5 hours

Some nodes?

Doesn't really matter. Until 00:00 GMT tonight nothing will even attempt to stake

got same issue synced fine in morning

lets see if it works after 00.00 20th

I haven't really looked into the PoS calculations, hopefully they'll be low enough so that it maintains the chain

If you fixed this, then it has just returned as the issue still occurs.  The wallet loads but does not display any info. 

The output of cryptcashd is error: couldn't parse reply from server

This is with a fresh download of the source about 10 minutes ago.

so many problems

so what's next? this is the end

how many times more

stuck at 10k blocks again

Guess nobody is mining it on the "latest" code. Has suprnova updated?

dev can solo mine the 800 blocks so once it syncs we can send coins to wallet to stake

for me too

That might be a bit beyond this dev. I'd attempt to mine it but my GPU equipped PC is busy playing Minecraft with my son :-)

And of course if staking is enabled on current code it eats all the RAM

I'm sorry Niitassin the problem is still there, I enabled PoS and it consumed all of the RAM

has your wallet synced

Yes cleaned the directory and it resynced straightaway up to block 10000

mine stuck there too

It will be until it is mined. My concern is that if suprnova haven't updated (which they probably haven't if niitassin hasn't contacted them) then their wallet does not see the extra PoW blocks.

il message ocminer

Thanks for your info, no I had not updated yet, as there were simply so many bugs/forks/updated/quirks that at some point I got lost in all that stuff :)

I'm currently compiling the new daemon and will resync once its done.

Which is the actual, correct block height ?

After Resync my wallet stops at block 10000

+1   ???

when the next mining algorithm ? where Pool

Good morning, where I can buy 17259.22 xcypt  to create the master node?

17259.22 of DeOxyRibose [XNA]   =  17259.22 xcypt ??

deniska1982
The idea wallet himself had to switch to the new algorithm. But no.
The appearance of the pool will depend on how quickly ocminer reconfigures "suprnova"

What is the solution to this fiasco it's been going on long enough I understand no pain no gain but how long more del js talented mad I'd like to see this coin as a hot topic

waiting for next swap :)
keeping coins

hempoex, there are absurd prices and no order, if someone wants to sell at a fair price 17259.22'm there!

17259.22 of DeOxyRibose [XNA]   =  17259.22 xcypt  the change is 1:1 !!

has ocminer mined the blocks

at this time wallet is synced current block 10041 in blockchain.
someone mining.
PoS not work equal masternode not work.

Niitassin - you need to get POS working, else guess what will happen at block 10800

Thanks for not letting me sell this one of mineta! already dead after only 8 days !!

my wallet syncs fine just waiting to get some xcrypt coins if dev could get c-cex to swap the coins that would be better but otherwise il wait until we get a working client

so what does the future hold for this

what is the News about XCYPT????

dev gone?

does staking work i sent some coins from empoex to wallet not shown

Staking does not work

Honestly scr*w marketplace. Get POS working or this is dead..

Absolutely, worry about features when the basics work

What do you mean by premine?

New Pool up:

https://ccsha.suprnova.cc

Please withdraw your funds from the old one immediately.

Just as a sidenote: I had lots of compilation warnings when compiling the daemon.. I cannot guarantee everything works, don't throw lots of hash at it or rent a lot ..

EDIT: The new daemon just crashed my whole server by using up all its memory and going in an endless loop.

I'm done with this coin now and not gonna try anything again. Please withdraw your remaining funds from the old pool asap.

Thanks

I had a similar problem unfortunately.

I think it's because niitassin really isn't confident with what he is doing

Edit - I can confirm that as usual enabling PoS consumes all the RAM on the machine

dev needs to create something that will work, i like the project why koz dev is ambitious but how many times will you have us update