Print Page - sp20 problem with temperature

Title: sp20 problem with temperature
Post by: carpintero1832 on June 16, 2015, 06:08:54 PM

hello to all the community
I will have some temperature problem?
that I can do to solve it?
which is the temperature you have to check?
thanks
http://imagize[Suspicious link removed]ageshack.us/v2/xq90/540/oeP8LA.png (https://imageshack.com/i/f0oeP8LAp)
the temperature is yellow.
it means?
http://imagize[Suspicious link removed]ageshack.us/v2/xq90/537/cxQm5f.png (https://imageshack.com/i/excxQm5fp)http://imagize[Suspicious link removed]ageshack.us/v2/xq90/912/NZQAYJ.png (https://imageshack.com/i/pcNZQAYJp)

Title: Re: sp20 problem with temperature
Post by: slastar on June 16, 2015, 06:55:11 PM

I don't see any problem. Yellow means that chip is a bit hot , but nothing to worry. Problem start if temps are going to red.
If you don't like yellow color set fan to 100% or lower temps of air on intake or lower voltage.

Title: Re: sp20 problem with temperature
Post by: GrumpyBear2 on June 16, 2015, 07:00:15 PM

Probably best to lower the wattage setting to 180-ish Max Watts (at least for that loop). 120-125 is the overheating area.

As per philipma1957 page:

Temp Front / Back T,B
33 °C / 72,67 °C
Fan Speed
40
Start Voltage
0.62 / 0.62 / 0.62 / 0.62
Max Voltage
0.67
Max Watts
180 / 180 / 180 / 180

Title: Re: sp20 problem with temperature
Post by: philipma1957 on June 16, 2015, 07:16:22 PM

Quote from: GrumpyBear2 on June 16, 2015, 07:00:15 PM

I can't see the photos as this site f'd them up.

sp20's should run under 1400gh more like 1300gh forget the ratings of 1650 to 1700gh.

if

40 fan

0.62
0.62
0.62
0.62

0.63 max

are good bump a little

like

0.625
0.625
0.625
0.625

and 0.635

fan 50

Bitcoin Forum

Bitcoin => Hardware => Topic started by: carpintero1832 on June 16, 2015, 06:08:54 PM