Title: [LTC] Question About Difficulty Rating Post by: c4n10 on September 21, 2012, 11:26:53 PM I understand that there is a formula that determines the difficulty rating for BTC mining, is it the same for LTC mining, is there a formula that is used to calculate the difficulty?
If so, then how is it possible that different pools use different difficulty settings? How can they "set" the difficulty if it is determined by a formula of miners to hashing power...? Title: Re: [LTC] Question About Difficulty Rating Post by: smoothie on September 22, 2012, 02:31:11 AM They don't. In pools each hash submitted meets the minimum difficulty requirement equivalent to when LTC launched. The "winning" hash meets the difficulty criteria and then a block is then generated and each of the miners in that pool proportionally get a % of the 50 LTC based on how many shares they submitted. This is for PPS pools.
Title: Re: [LTC] Question About Difficulty Rating Post by: meebs on September 22, 2012, 02:53:04 AM If so, then how is it possible that different pools use different difficulty settings? How can they "set" the difficulty if it is determined by a formula of miners to hashing power...? The difficulty you are referring to is PER SHARE difficulty. This exists in BTC as well, its just not highly utilized yet. The difficulty 1 share has X hashes required to solve.. a difficulty 2 share takes 2x hashes (you do shares at half the rate but each one is worth double). This reduces bandwidth and server load. Title: Re: [LTC] Question About Difficulty Rating Post by: c4n10 on September 22, 2012, 06:45:36 AM They don't. In pools each hash submitted meets the minimum difficulty requirement equivalent to when LTC launched. The "winning" hash meets the difficulty criteria and then a block is then generated and each of the miners in that pool proportionally get a % of the 50 LTC based on how many shares they submitted. This is for PPS pools. That's not what this sentence sounds like: Code: In the first months after the launch of Litecoin, most pools used a share difficulty of 2-16 or 2-15. They could have used even lower values, but there was no point in doing that. Quoted from: https://github.com/litecoin-project/litecoin/wiki/Comparison-of-mining-pools Title: Re: [LTC] Question About Difficulty Rating Post by: c4n10 on September 22, 2012, 06:48:08 AM you do shares at half the rate but each one is worth double Sorry, I'm not understanding. The pool is limiting my hash rate? Title: Re: [LTC] Question About Difficulty Rating Post by: c4n10 on September 22, 2012, 07:03:30 AM If so, then how is it possible that different pools use different difficulty settings? How can they "set" the difficulty if it is determined by a formula of miners to hashing power...? The difficulty you are referring to is PER SHARE difficulty. This exists in BTC as well, its just not highly utilized yet. The difficulty 1 share has X hashes required to solve.. a difficulty 2 share takes 2x hashes (you do shares at half the rate but each one is worth double). This reduces bandwidth and server load. Also, how is the per share difficulty set? Is this an option enabled somewhere in a configuration file or are they re-writing code somewhere and it is a function that the pool owners have somehow created? I know that when I go to a pool with an easier difficulty rating, I solve shares MUCH faster, how are they controlling that? I want to run my own pool and I am trying to figure out how difficult it will be aside to move from solo mining to running a pool aside from building the website for the pool and writing scripts to interface the site with the client server. Title: Re: [LTC] Question About Difficulty Rating Post by: meebs on September 22, 2012, 01:42:56 PM you do shares at half the rate but each one is worth double Sorry, I'm not understanding. The pool is limiting my hash rate? instead of a share requiring say 75k hashes, it would require 150k hashes.. hence "half the rate" the share would then pay say .004 ltc each instead of .002 ltc each. exact same income, just different way of getting there. now the network difficulty (8.8 currently on LTC and 2.86 million on BTC) is something different....... Title: Re: [LTC] Question About Difficulty Rating Post by: c4n10 on September 22, 2012, 01:50:18 PM you do shares at half the rate but each one is worth double Sorry, I'm not understanding. The pool is limiting my hash rate? instead of a share requiring say 75k hashes, it would require 150k hashes.. hence "half the rate" the share would then pay say .004 ltc each instead of .002 ltc each. exact same income, just different way of getting there. now the network difficulty (8.8 currently on LTC and 2.86 million on BTC) is something different....... I see. And how do they control how many hashes are required? Is this a function of a config file somewhere or is it something that the pool owners have coded themselves? Title: Re: [LTC] Question About Difficulty Rating Post by: rascal777 on June 29, 2013, 04:17:29 AM The best info I have found searching for this is this found in the LiteCoin Forum:
https://forum.litecoin.net/index.php?topic=1861.0 (https://forum.litecoin.net/index.php?topic=1861.0) Quote Your expected return, during a run of 2016 blocks (about 3 days) is: expected_return = 50 LTC/block * 24 blocks/hour * your_hashrate / network_hashrate To be clear, this network hashrate is the software's estimate of the network hashrate over the course of the previous 2016-block run. It doesn't actually store that though, it stores "nBits", which is commonly reported as a floating-point difficulty number, such that: network_hashrate = difficulty * 2^32 / 150s so you can simplify that first equation down to: expected_litecoins_per_hour = your_hashrate_in_kH_per_s / difficulty * 0.0419 or, to within 1%, expected_litecoins_per_day = your_hashrate_in_kH_per_s / difficulty Again, this difficulty is nailed down at the start of each 2016-block run, and the equation holds for the rest of the run, regardless of changes to your hashrate during the run. So written this way, the trick is predicting future difficulty changes. The most direct way is to keep an eye on the block generation rate and run through the difficulty recalculation algorithm yourself, which is quite simple. At the end of each 2016-block streak, it looks at the time it took to generate all those blocks, and divides 2016 by it to work out the actual block generation rate, then adjusts the old difficulty linearly to compensate for the error. Effectively it picks a difficulty which would have made the previous 2016-block run complete in the right amount of time. For example, take the 153-difficulty sequence which ended this morning: Last block time: 2013-04-06 01:10:35 Last block of previous run: 2013-04-03 10:39:05 Total time for 2016 blocks: 3751.5 minutes Average time per block: 1.86 minutes Drift factor: 2.5 / 1.86 = 1.34 New difficulty: 1.34 * 153 = 205 If you're running this calculation yourself before the end of a run, e.g. using the last 100 blocks as a guide, then make sure the sequence of blocks you use all have the same difficulty value (i.e. they don't cross a 2016-block boundary). You can use this calculation to get unstable short-term readings or more stable medium-term readings, depending how many blocks you look at. The best estimate for the next difficulty will come from using all of the blocks since the start of the current 2016-block run. In the end though statistics can help you find trends in past data, but guessing the future is up to the economists. Economics is about models, not truth, and there's no one correct model. So this is about as far as you can go with strict equations. |