Bitcoin Forum

Bitcoin => Hardware => Topic started by: akaneo on July 18, 2015, 03:29:59 AM



Title: S5 stops hashing
Post by: akaneo on July 18, 2015, 03:29:59 AM
 I have 3 antminer S5s and 1 S4 and atleast once a day one of the S5s will just stop hashing and when I log into it and click on status it will not go threw so I have to reboot the miner.  All three of them are running the latest firmware and not overclocked ever.  Anyone else have this problem?  Or know how to correct this problem?

Thanks in advance.


Title: Re: S5 stops hashing
Post by: notlist3d on July 18, 2015, 04:26:23 AM
I have 3 antminer S5s and 1 S4 and atleast once a day one of the S5s will just stop hashing and when I log into it and click on status it will not go threw so I have to reboot the miner.  All three of them are running the latest firmware and not overclocked ever.  Anyone else have this problem?  Or know how to correct this problem?

Thanks in advance.

I would make sure all the connections are snug.  Chances are that they are but its worth a shot.   If so look at temp does that one run hotter then others? Different PSU then others? Or any differences?

And as far as software might try to load firmware again just to make sure all is good there.


Title: Re: S5 stops hashing
Post by: QuintLeo on July 18, 2015, 07:05:04 PM
How are your room temperatures that they are in? Might be an overheating issue.