Title: How to mine over Network Cable with S1? Post by: witch on July 21, 2015, 08:08:29 AM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!
Title: Re: How to mine over Network Cable with S1? Post by: notlist3d on July 21, 2015, 08:29:36 AM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. Title: Re: How to mine over Network Cable with S1? Post by: witch on July 21, 2015, 08:30:13 PM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. The settings r, IPv4 netmask 255.255.255.0 IPv4 gateway 192.168.1.1 IPv4 broadcast 192.168.1.255 Use custom DNS servers 192.168.1.1 It is set to STATIC addy Title: Re: How to mine over Network Cable with S1? Post by: notlist3d on July 21, 2015, 11:42:26 PM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. The settings r, IPv4 netmask 255.255.255.0 IPv4 gateway 192.168.1.1 IPv4 broadcast 192.168.1.255 Use custom DNS servers 192.168.1.1 It is set to STATIC addy Change DNS to 8.8.8.8 (googls DNS). Is your router giving out 192.168.1.X numbers? If so try ip of pool and see if that makes any difference. Also instead of typing next time try screen shot as mentioned :) Title: Re: How to mine over Network Cable with S1? Post by: witch on July 22, 2015, 05:07:58 AM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. The settings r, IPv4 netmask 255.255.255.0 IPv4 gateway 192.168.1.1 IPv4 broadcast 192.168.1.255 Use custom DNS servers 192.168.1.1 It is set to STATIC addy Change DNS to 8.8.8.8 (googls DNS). Is your router giving out 192.168.1.X numbers? If so try ip of pool and see if that makes any difference. Also instead of typing next time try screen shot as mentioned :) Title: Re: How to mine over Network Cable with S1? Post by: notlist3d on July 22, 2015, 06:40:43 AM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. The settings r, IPv4 netmask 255.255.255.0 IPv4 gateway 192.168.1.1 IPv4 broadcast 192.168.1.255 Use custom DNS servers 192.168.1.1 It is set to STATIC addy Change DNS to 8.8.8.8 (googls DNS). Is your router giving out 192.168.1.X numbers? If so try ip of pool and see if that makes any difference. Also instead of typing next time try screen shot as mentioned :) As I asked before can you please take a screenshot of your network page? A screenshot not words :) Title: Re: How to mine over Network Cable with S1? Post by: witch on July 22, 2015, 09:14:48 AM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. The settings r, IPv4 netmask 255.255.255.0 IPv4 gateway 192.168.1.1 IPv4 broadcast 192.168.1.255 Use custom DNS servers 192.168.1.1 It is set to STATIC addy Change DNS to 8.8.8.8 (googls DNS). Is your router giving out 192.168.1.X numbers? If so try ip of pool and see if that makes any difference. Also instead of typing next time try screen shot as mentioned :) As I asked before can you please take a screenshot of your network page? A screenshot not words :) Title: Re: How to mine over Network Cable with S1? Post by: notlist3d on July 22, 2015, 09:26:05 AM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. The settings r, IPv4 netmask 255.255.255.0 IPv4 gateway 192.168.1.1 IPv4 broadcast 192.168.1.255 Use custom DNS servers 192.168.1.1 It is set to STATIC addy Change DNS to 8.8.8.8 (googls DNS). Is your router giving out 192.168.1.X numbers? If so try ip of pool and see if that makes any difference. Also instead of typing next time try screen shot as mentioned :) As I asked before can you please take a screenshot of your network page? A screenshot not words :) It still has other DNS in there try: 8.8.8.8 If that does not work see if you can get to pool via ip. Let me know how it goes. Title: Re: How to mine over Network Cable with S1? Post by: witch on July 22, 2015, 07:05:39 PM How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi? I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty! Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here. That will help a lot. The settings r, IPv4 netmask 255.255.255.0 IPv4 gateway 192.168.1.1 IPv4 broadcast 192.168.1.255 Use custom DNS servers 192.168.1.1 It is set to STATIC addy Change DNS to 8.8.8.8 (googls DNS). Is your router giving out 192.168.1.X numbers? If so try ip of pool and see if that makes any difference. Also instead of typing next time try screen shot as mentioned :) As I asked before can you please take a screenshot of your network page? A screenshot not words :) It still has other DNS in there try: 8.8.8.8 If that does not work see if you can get to pool via ip. Let me know how it goes. Title: Re: How to mine over Network Cable with S1? Post by: witch on July 24, 2015, 07:46:52 PM anyone know whats wrong?
Title: Re: How to mine over Network Cable with S1? Post by: -droid- on July 24, 2015, 08:06:38 PM plug a network cable into your laptop and straight into the s1
set your laptops network ipv4 to a 192.168.1.59 or similar IP log into the s1 via 192.168.1.99 (i think that was default) set your S1 to DHCP on WAN and LAN under the network tab unplug the network cable from your laptop and into the router reboot the s1 change laptops network ipv4 setting back to DHCP log into your home router and find 'antminer' and see what the IP is log into that IP and config your pools done :) Title: Re: How to mine over Network Cable with S1? Post by: witch on July 24, 2015, 08:47:28 PM plug a network cable into your laptop and straight into the s1 set your laptops network ipv4 to a 192.168.1.59 or similar IP log into the s1 via 192.168.1.99 (i think that was default) set your S1 to DHCP on WAN and LAN under the network tab unplug the network cable from your laptop and into the router reboot the s1 change laptops network ipv4 setting back to DHCP log into your home router and find 'antminer' and see what the IP is log into that IP and config your pools done :) It is connected, I can get it to it threw the Network Cable, but will only Mine on WiFi? Title: Re: How to mine over Network Cable with S1? Post by: witch on July 28, 2015, 09:45:55 PM bump!
Title: Re: How to mine over Network Cable with S1? Post by: witch on July 30, 2015, 08:21:02 AM Ok, so now I am able to get the S1 to mine over a Network Cable by changing the WAN to DHCP but I have to use WiFi to access the Config screen. But how do I access the Config screen threw the network cable instead of using 192.198.1.9 over wifi? :o
|