Title: Announcement: BFL ASIC - Release specifications Post by: HDSolar on September 30, 2012, 04:58:55 AM Butterfly Labs reveals final performance specifications for it's revolutionary ASIC hardware.
BitForce Jalapeno - 4.5gh/s @ 4.5w BitForce Single SC - 60 GH/s @ 60w BitForce MiniRig SC - 1,500 GH/s @ 1,500w Power figures are +/- 10% of those listed while we finish optimizing our power subsystem. NEW An as yet named 'Little Single' device which will hash at a rate of 30 GH/s and cost USD $649.00. You may notice that these performance figures exceed that of our previously published specification by approximately 50%. Our intention was to eventually over deliver while also being conservative during development. We had planned to reserve this performance increase for a future firmware update and was one method we planned to use to protect our customers in the event of a price war. However, due to the maturity of our development and competition in the market, we felt it was time to clarify what customers will actually receive both in speed and particularly in power consumption so they can properly evaluate their options and make good decisions. We hope it's now easier to understand the closed lip approach of our ASIC line product development. A pledge to our customers: Butterfly Labs has always been committed to our customers. With the transition to ASIC from FPGA, we offered a 100% buyback program on the purchase price of your FPGA units towards the purchase of one of our ASIC units. This is an offer currently unmatched by any other manufacturer. People have asked why would we do this? We do this because our mission is to stand behind our customers and preserve the value of their hardware investment through all market changes, now and in the future. Simply put, you can count on us to protect your mining investment. In summary, all current orders are automatically 4.5 GH/s - 60 GH/s or 1.5 TH/s devices. You need do nothing, just wait for delivery. Our Value pledge: As always, our focus has been on offering the most competitive product, both in terms of initial price but also the most competitive TCO in the industry. Our current power consumption targets for our first generation ASIC products are approximately 1 GH per watt, far and away the lowest power consuming units available at any price. Not only will our products perform faster than any other product currently available, it will also cost less to run now and in the future. As with our FPGA products, when the time comes for our second generation ASIC products, we will not forget our customers and will make every effort to transition you, the customer, to the second generation ASIC as easily, quickly and in the most cost effective manner as possible. Title: Re: Announcement: BFL ASIC - Release specifications Post by: koin on September 30, 2012, 05:56:34 AM Butterfly Labs reveals final performance specifications for it's revolutionary ASIC hardware. link to source? Title: Re: Announcement: BFL ASIC - Release specifications Post by: ||bit on September 30, 2012, 06:15:32 AM Butterfly Labs reveals final performance specifications for it's revolutionary ASIC hardware. link to source? The singles on BFL's order page reflect the same specs as above for hash rate (i.e. 60Gh): http://www.butterflylabs.com/order-form-bitforce-sc-single/ ...capitalism at work... I'd bet we can probably thank Cablepair & ngzhang for putting on the pressure. Though, Cablepairs deal is still probably just slightly better on price per hash. Unless you compare against the BFL minirig (which seems about even). Either way, good news for BFL customers. ||bit Title: Re: Announcement: BFL ASIC - Release specifications Post by: crazyates on September 30, 2012, 06:34:17 AM Though, his deal is still probably just slightly better on price per hash. Unless you compare against the BFL minirig (which seems about even). By my numbers, the bASIC is still ahead in GHs/1kUSD, but only by about 6%. And the power numbers are still unknown for the bASIC, but at 1GH/W, that puts the SC Single ~60W.Bottom line, I don't think you can go wrong with either. Title: Re: Announcement: BFL ASIC - Release specifications Post by: vitruvio on September 30, 2012, 07:12:26 AM Butterfly Labs reveals final performance specifications for it's revolutionary ASIC hardware. link to source? The singles on BFL's order page reflect the same specs as above for hash rate (i.e. 60Gh): http://www.butterflylabs.com/order-form-bitforce-sc-single/ ...capitalism at work... I'd bet we can probably thank Cablepair & ngzhang for putting on the pressure. Though, Cablepairs deal is still probably just slightly better on price per hash. Unless you compare against the BFL minirig (which seems about even). Either way, good news for BFL customers. ||bit Official BFL Support forums: https://forums.butterflylabs.com/showthread.php/16-Announcement-BFL-ASIC-Release-specifications Title: Re: Announcement: BFL ASIC - Release specifications Post by: Jack1Rip1BurnIt on September 30, 2012, 07:50:00 AM Keep in mind the basic products performance is not optimized yet. Tom stated he knows for sure his chips will do the claimed speeds with an unoptimized primitive miner. After the softare developers get a hold of them we may see 10 percent or better inprovements. Just some food for thought.
Title: Re: Announcement: BFL ASIC - Release specifications Post by: Meatball on September 30, 2012, 02:38:52 PM Man, 1 GH/watt. Who would have thunk it in the days of 1 GH/300-400 Watts. :)
Title: Re: Announcement: BFL ASIC - Release specifications Post by: tacotime on September 30, 2012, 03:18:01 PM I'm curious to see if someone were to come to the scene with a 100gh/s miner, if bfl would match that.
Just show the damn things working, not reasons to give you more money. Title: Re: Announcement: BFL ASIC - Release specifications Post by: vitruvio on September 30, 2012, 04:51:17 PM BFL already "pre-sell" 1500 GH/ miner :D
Regards |