|
Title: Multipool is requesting a lot of work restart Post by: TheStalker on September 14, 2015, 12:21:51 PM I have a Gigabyte R9 290x and I started to mine some LTC from Multipool, but it's requesting a lot of work restart and accepting just a little, someone knows why is this happening?
http://puu.sh/kaVcx/a7b1f3c56c.png Title: Re: Multipool is requesting a lot of work restart Post by: psycodad on September 14, 2015, 12:45:39 PM The diff you are mining at (256) is way too high for your hashrate (~270kh/s), there will be new work before you are able to submit a share most of the time.
I have a small USB miner with about the same scrypt hashrate and it mines at a diff of 8 on a multipool vardiff port. I would recommend with that hashrate to not mine with a difficulty over 32. HTH Title: Re: Multipool is requesting a lot of work restart Post by: TheStalker on September 14, 2015, 12:54:08 PM Do you know some good vardiff pools to share?
Title: Re: Multipool is requesting a lot of work restart Post by: psycodad on September 14, 2015, 01:11:22 PM Those are three pools I have used, but there are certainly gazillions of other reliable scrypt pools out there:
Also make sure to check the Pool section in the altcoin board (https://bitcointalk.org/index.php?board=199.0). Title: Re: Multipool is requesting a lot of work restart Post by: GriffinHeart on September 18, 2015, 01:36:01 PM Divide your Kh/s by 10 and set that as your difficulty. Works just fine for me. Difficulty is always relevant.
|
