Bitcoin Forum

2oz NastyFans Minted Seats!               Also available in 1oz (https://bitcointalk.org/index.php?topic=352515.msg3773054#msg3773054) & 5oz (https://bitcointalk.org/index.php?topic=826527.msg9235669#msg9235669) sizes.
https://talkimg.com/images/2024/01/11/3CSiz.gif
Available for purchase now in the NastyShop.
https://talkimg.com/images/2024/01/11/3Cnw2.png (https://nastyfans.org/mint)

https://talkimg.com/images/2024/01/11/3CCNc.pnghttps://talkimg.com/images/2024/01/11/3CQ4P.png


The size of a 2oz coin allowed for a new design on the back.  There is also a version minted in extremely limited quantity (25) with gold highlighting (sold out).
The gold highlighted pre-order list can be found here (https://bitcointalk.org/index.php?topic=1199731.msg12989791#msg12989791).

---

NastyFans Minted Seat Features:

• Receives & Stores Bitcoin Distributions for 2 NastyFans Seats
• 2oz .999 Fine Silver
• 47mm in Diameter
• Proof-like Finish
• Tamper-Evident Security Hologram
• Engraved Public & Private Keys
• Sequential Public Key Vanity Addresses (i.e. 1nastyxx)
• Limited 250 Coin Production Batch (25 w/ gold highlighting)
• Sealed in Plastic Airtite Capsule
• 50% of Regular Sales Donated to NastyFans
• Coin Analyzer available at nastyfans.uberbills.com (http://nastyfans.uberbills.com)

These coins are similar to physical bitcoins you see from Casascius and others.  I'll highlight a few of the major differences.  

First of it's kind!  Coins are tied to NastyFans seats and not preloaded with BTC.  By not preloading these coins with BTC, they are not only cheaper to purchase than their competitors, but the potential is there for the BTC address engraved on the coin to continue rising forever with regular NastyFans BTC distributions, as opposed to being a fixed amount as with similar physical Bitcoin options.  It's like having a Bitcoin miner with no costs or effort to maintain.

No more printed keys!  These keys are engraved, and forever attached to the coin.  A tamper evident hologram is placed over the private key to help alleviate security concerns.

No more firstbits!  Your entire public key is engraved on the coin, eliminating any uncertainty that may exist about your coin's public address.

Sequential vanity Bitcoin addresses!  Know exactly what coin number you hold by the public address.  Each coin begins with 1nasty and is sequentially numbered with the following two characters.  

Limited production batch!  Only 250 coins produced (25 with gold highlights).  Being tied to seats instead of BTC also makes these coins extremely limited, as there are a limited # of NastyFans seats.

Revenue sharing!  With 50% of regular sales being donated to NastyFans, this is a giant fundraiser for all NastyFans.  You know your funds are going back to the Bitcoin community and helping to support a great organization that is dedicated to doing good for Bitcoin.  It is my hope that these coins will provide happiness to existing fans, while at the same time exposing NastyFans to a new group of potential members.

---

https://talkimg.com/images/2024/01/11/3CGxq.jpeg (http://imgur.com/S21sQhV) https://talkimg.com/images/2024/01/11/3CmPj.jpeg (http://imgur.com/Jhg2i8T)https://talkimg.com/images/2024/01/11/3C6rG.jpeg (http://imgur.com/sE6vO9R) https://talkimg.com/images/2024/01/11/3CPOD.jpeg (http://imgur.com/7VUwSyv) https://talkimg.com/images/2024/01/11/3CTCf.jpeg (http://imgur.com/0YUJh8b)

What is the difference between the 3 pre-order types?

Hallo OgNasty,

yes you interpreted my PM's right  :)

I like to order the 450$ Pre Order Package. What i tried to write in the PM was following:   (I can not write more PM's in the next 60 min)

1. Payment will be able lately Tuesday Evening! (like the last time) And i asked if you like to fix the price today or wait until tuesday (mid european time)?

2. I wanted to know when you expect the coins to be shipped? If it's after the 15. Dezember, you would have to wait with shipping until April 2016. Would that be OK?

Also please confirm that you still have my Shipping Adress (i ordered a 1 oz coin a while ago). Just because it seems to be impossible to communicate via PM in the Forum when you are a newby! I really don't know what i have written, that caused that the whole PM was censored 4 times.

I also wrote some other stuff ... but i don't want to repeat everything here!

Thanks!

P.S.

Maybe you quote this post and reply here. I really don't like to post just something througout the Forum to get my Newby status away! May it helps a bit if you quote my post!?!

Og, how bout a 1oz gold coin  :o

Let me know when you're ready and we'll make it happen.



I wouldn't be able to do a 1oz gold coin because it would be too small.  A 2oz gold coin is a possibility, but would be extremely expensive.  I have discussed it at length with a few interested parties, and if there were a few more I could realistically see that becoming a reality a year from now. 

so if i owned a nastyfans seat it will automatically accumulate bitcoins over time for me to withdraw or keep in the coin?

is there other requirements for owning the nastyfans seats?

If you own an online seat, it will accumulate until it hits the threshold and then will be sent to whatever address you have listed in the settings.  If you list the coin's address in the settings of your account, the BTC will be sent to your coin.

There are no requirements of any kind with the Minted Seats.  Online seats require you to log in once every 180 days to avoid penalties.  You can read more about NastyFans policy here: https://nastyfans.org/policy

I've started generating vanity addresses for these coins.  They will all start with 1nasty. 

1oz=1Nasty
5oz=1NASTY
2oz=1nasty

why not 2oz = 1NAsty   ? :)

That was actually considered.  It was decided for readability reasons, 1nasty would be better.

Thoughts on the back?

https://talkimg.com/images/2024/01/11/3CXPH.png

I like it, I think it fits with the other Nasty coin designs also.  Only thing I would like to see the sort of flame graphics take a little more of the side space to the edge of the coin.  I think the blank area is just a bit too big.

Thanks,
MC

Thanks.  The flame graphics are actually supposed to be water graphics (waves) as a play on our mining "pool."  The coin will have a proof-like finish with the white part being very shiny.  Once the center is covered by a hologram, I think the remaining open space will be necessary for the coin to really shine.


Below are what I believe to be the final renders that show where the gold highlights will be.

https://talkimg.com/images/2024/01/11/3nxNC.pnghttps://talkimg.com/images/2024/01/11/3C2ob.png

I was hoping there would be more gold highlight on the front.  Not sure where it would go based on the design.

I was worried that too much gold would take away from the beauty of the silver coin.  I could see if it is possible to add more gold around the NastyMining on the front like the green is on the below logo.  Is more gold something people want to see?

http://dev.nastyfans.org/images/nastymininglogo.png

I would think it to be a welcomed change.   :)

Yes, I think that would look good on the front, and do either the "Two Minted Seats" or the address on the back.

A rough draft...  Is this more along the lines of what you were hoping for?

https://talkimg.com/images/2024/01/11/3nevm.png

That looks great

Yeah, that looks good!

Agreed on the extra gold.

How many more preorders are needed before you feel you have enough to go for it Og ?

I would like to have them all sold.  There are currently 13 remaining.  I do not want to place the order before November.  Hopefully a few more folks will get their orders finalized in the next week or so.

That is sweet and I really like how you put the gold accent in the drips as well.

Thanks.  I just got the final image back from the artist.  He thought some unique gold drips would give it a better look.  If there are no more complaints, I believe this will be the final design.

https://talkimg.com/images/2024/01/11/3npjT.png

wonderful design, really stunning

I don't think both the "TWO MINTED SEATS" & the address on the back will be as repetitive looking as it appears in the image.  If you look at the design next to the actual 5oz coin image, you can see that the engraved public address blends into the coin, so it isn't really noticeable from a design perspective.

https://talkimg.com/images/2024/01/11/3n7g3.pnghttps://talkimg.com/images/2024/01/11/3nBuw.png

The minting order has been finalized and paid for.  I should be receiving coins in ~8 weeks and I hope to have them in everyone's hands before the end of January.

That's great, looking forward to receiving these :D

I will take the last one.

Gold highlighted pre-order packages are now sold out.  Quoting for posterity and to clean up the OP.  I am now opening orders for the all silver 2oz Minted Seats.  Cost is $225 with $100 of that being donated to NastyFans, shipping should commence in late January.

Well, as with any project there have been delays, delays, and more delays...  I have finally gotten all the rights to the fonts squared away with the mint and approved artwork for the dies.  They can now enter the minting phase.  I am told this will take between 6-8 weeks and then they will need to have the gold plating put on by hand.  This could push shipping of these coins back to February.  The good news is that there should be no more delays.  It also gives me more time to generate more difficult vanity addresses.  ;D

Thanks for the update and I'm sure the wait will be worth it!  :)

The coins have been minted, but I was not satisfied with the level of quality from the mint.  As you can see from the below picture, there are quite a few scratches on these coins.  Enough that I felt they were unacceptable.  I have asked that they be re-stamped and will continue updating on their progress.

https://talkimg.com/images/2024/01/11/3nfg2.png

Thanks for the updates! Will this push the estimate shipping date back any further?

I don't think so.  They were about 2 weeks ahead of schedule, so I think I should still be able to get them out by the end of next month.  Just my guess though.

The coins have been re-stamped and I'm told they came out beautiful.  Once the select gold plating was added, I thought it was a bit ugly for lack of a better word.  After seeing a few different gold plating options, I made the decision to change the gold plating to what is pictured below.  This piece was done quickly as an example so don't be too harsh as the finals will come out better.  I believe this is the best option for having the design maintain it's visibility.  I am predicting that these coins will be in buyers' hands by the end of January.

https://talkimg.com/images/2024/01/11/3nYkz.png

I like the gold plating this way and can't wait to get one in hand  ;D

Very nice, Thanks for the update!

I thought I would be showing pictures today, but there has been another delay.  The mint accidentally gold highlighted all of the coins.  I considered accepting them, but I don't think that would be right.  The mint will now have to melt down all of the highlighted coins and re-stamp them again.  This shouldn't take that long.  Hopefully 3rd time is the charm and I have them in hand next week.

Thanks for letting us know, I appreciate that. Thats too bad that they didn't plate them correctly. 

Will there be a way on the JSON API (https://nastyfans.org/mint.json) that shows the coin has the gold plating? Casascius used to incorporate it in the addresses by adding Au or Ag in the vanity address. It could add value and rarity to the preorder coins.

I'll definitely make it known publicly which addresses are the gold highlighted coins.  I wanted to get 1nastyAu_ addresses for all of the gold highlighted coins, but it is taking much longer than expected.  That may not be an option.  I've been generating 1nasty addresses for several months now, so hopefully I have some good backup options.

Oh that's right, I remember reading that now. Still trying to catch up from the holidays  8)

I am open to suggestions on a beginning vanity address for the gold highlighted coins.  Maybe a single letter so I have enough outcomes to be sequential like 1nastyG_ (G for gold)?

I like the G for gold in 1nastyG.

I would like to stick to 1nastyau as a prefix.  I purchased an additional GPU to try and speed the process along, but the only thing that is going to resolve this last issue is time.

The 2oz coins have arrived! 

https://talkimg.com/images/2024/01/11/3n6Zm.pnghttps://talkimg.com/images/2024/01/11/3nP3W.png
https://talkimg.com/images/2024/01/11/3nRBJ.pnghttps://talkimg.com/images/2024/01/11/3ntdC.png

Very nice, it looks like they did a spectacular job with the plating this time around.   :)

Unfortunately, I don't share your enthusiasm.  I think the plating on the front looks messy in many places.  The back looks neat.

How do you feel about the plating Og?

I noticed the messy plating on some spots too but I think it fits with the Nasty-style.

You can definitely tell it was done by hand...  The coins are pretty small, so the pictures make it look worse than in person.  They are not perfect though by any means.  I also just took pictures of the first one I saw.

Although I agree it isn't perfect and maybe "spectacular" was construed as such but I think it does match the style of the what the gold drips were going for.

After reading the feedback here, I've gotten in touch with the mint to voice my concerns.  Especially considering I've sent them 1oz & 5oz coins to be 24kt gold plated as well.  I've been assured that the 1oz & 5oz coins will be sent out of house to be done by a different professional using a different method.  I'm now exploring what possibilities are available for these 2oz coins.  I've already had them re-stamped 3 times, and this might be the last time this mint will ever work with me on a project, but I'm committed to doing everything in my power to make sure that these coins come out as nice as they possibly can.  I will continue to update if there are any new developments.  I should also mention that this coin was the first one I unwrapped.  I have not even laid eyes on the other coins, so the plating could be better/worse, I am not sure.  I am going to leave them untouched until I've either worked out a new solution, or been told to go away by the mint.

Are you using NWT for the mint? I know they are not the best, but I have never had issues with them doing the gilt on silver coins.

I used them for the 1oz coins but was not satisfied with the options I was presented.  At the time they told me they couldn't do mirror finishes or gold select plating (this was nearly 4 years ago) and refused to let me take possession of the dies (hard to believe this is true, maybe I was dealing with a rogue customer service rep on a bad day?), so I found a mint with better options.  I believe the 5oz & 2oz coins are higher quality as far as the stamping and blanks are concerned, but the in house plating was "sloppy" to quote the above posters.  Thankfully they are willing to use an outside company for the gold plating of the other coins, but I'd ultimately like them to redo these as well.  We'll see.  In any event, I could use this delay to generate sexier vanity addresses to choose from, which is a definite silver lining.

I've learned that if you don't specify the plating process, mints will basically just grab a gold pen off a Walmart shelf and give coins to a $10/hr employee to color on. 

The 1oz & 5oz coins I sent in will be taped off and dipped as opposed to colored with a pen.  I'm told that this while being more costly is significantly better.  We will see.  The 1oz coins are pretty small, so I have concerns about the detail level.  I'm willing to go with what the experts say though and hopefully everyone will not be disappointed.  I'm waiting to hear back from "the boss" at the mint I'm currently using to see if having these 2oz gold select coins re-stamped and sent in to be taped and plated is an option for me.  After 3 rounds of stamping (that were all their fault) I imagine they are probably already losing money on this project so I'm unsure what their response will be.  I am a good customer and they are aware I plan to use them to mint pure gold coins in the future, so hopefully they will be accommodating.

I appreciate the time and effort you've made to make these the best they can.

Yup... both bhcoins (3rd edition 2FA) and gravitate recently have had issues with gold plating.

Thanks.  I'm sure it's been a detriment to my personal reputation.  The mint has been amazing about being willing to correct any perceived mistakes and on their own dime.  They have told me that they are willing to re-stamp the coins again and send them away to be done using a different method in order to make me happy.  I think this is the ideal solution at this point and nobody seems too concerned with delays so I am going to take them up on their offer.

Gold plating is just a tricky thing to be done well.  The blame for the "sloppy" plating job does fall somewhat on me for not having these designed with gold plating in mind in the first place.  I should have educated myself a little better on the processes used and the delays from this point forward are 100% my fault.

The 2oz gold highlighted coins have been re-stamped again and are on their way to a new facility in order to be gold highlighted alongside the 1oz & 5oz silver coins.

Do you have prices and mintages for the 1oz and 5oz Gold highlights?

I decided to create the theme of having 10% of Minted Seats be highlighted with gold.  The mintages are as follows:

1oz Silver Minted Seats
500 Total
50 w/ Gold Highlighting

2oz Silver Minted Seats
250 Total
25 w/ Gold Highlighting

5oz Silver Minted Seats
100 Total
10 w/ Gold Highlighting

I have not decided on pricing yet.  They will likely carry a $15-$45 premium to their all silver counterparts.

Og are any of these still available for sale?

The only coins to sell out so far are the 2oz gold highlighted coins.  The rest are or will be made available for sale as soon as they are in my hands. Probably another week or two.

They have arrived.  The delay from this point on is in generating the necessary sequential vanity addresses.

Thoughts on the new highlighting job?

https://talkimg.com/images/2024/01/11/3ndS8.jpeg

it's awesome !

Looks really good!   :)

Excellent gold plating this time.

BEFORE:AFTER:
I appreciate your feedback.  I think the coins came out better as a result.

Agreed and the plated outer ring is a nice touch as well.

Very nice, I look forward to adding them to my collection.

The first 2oz Minted Seat has been engraved!

https://talkimg.com/images/2024/01/11/3ZeXP.jpeg

Looking good!  can't wait to get mine :)

I engraved the rest of the all silver 2oz coin orders today (& a couple 5oz orders).  Next up will be the 1oz gold highlighted coins.

https://talkimg.com/images/2024/01/11/3ZD32.jpeg

My 2oz and 1oz coins arrived today!  Very happy with them!

https://i.imgur.com/Ioorix9.jpg

Very nice! I received a gold-highlighted 1oz coin this week, I really like the highlights on the coin. Looking forward to receiving my 2oz coins package!

Great job!

I've shipped out very few 2oz coins so far. Only those who only ordered the all silver. I'm still generating addresses for the 2oz gold highlighted coins, unfortunately. This is taking much longer than I had anticipated.  I currently have only 6 of the 25 sequential vanity addresses I need.

Any news?
Is my order shipped or I have to wait a bit more?

Thanks

Everything is still waiting on the 1nastyau address generation for the gold highlighted coins.  None of those coins have shipped yet.  What I expected to be very quick (I have generated addresses 2 digits longer in less time) has taken much longer than I thought.  While I do have 18 of the 25 required 1nastyau addresses, I only have 6 of them that have the right sequential (1nastyau1, 1nastyau2, etc.) characters.  I think for the good of the product, we should continue to wait.  I am open to outside thoughts if anyone feels that this has taken long enough and I should just use any 1nastyau address I can get my hands on.  That is certainly an understandable position.

take all the time you need for doing your best.
I have only asked for some information, thank you for your answer  :)

any news on the progress generating the 1nastyau addresses?

Here is the current situation.  I have generated 18 1nastyau addresses.  Out of those 18, only 6 are the correct sequence.  This has become incredibly time consuming, and I apologize.  I am hoping to generate the 1nastyau1 address to be the first coin to be engraved.  Once that is found, I can begin engraving and at least shipping orders as the addresses are found.  It is crazy that this one combination is taking so long.  It doesn't make much sense to me since I can bang out 1NastyFan addresses which have an additional character...

I am currently generating these addresses at 85Mkey/s.  I have considered purchasing another GPU to try and speed things along, but can only run so many without heat becoming an issue, especially this time of year.  I may try upgrading one of my 7970's to a Fury-X in order to try and speed things along, but ultimately the only thing that will fix this problem is time...

All I can ask is that people remain patient for the good of the overall product.  If you are tired of waiting, let me know and I can see if someone is willing to purchase your spot, or if there is something else we can work out.

---

MAY 11th UPDATE:
I have installed a R9 Nano that brings the total generation rate of these addresses to 125Mkey/s.  I also now have 7 of the 25 needed sequential addresses.

Please provide another update to the address generation.  I'm reaching my wits end at waiting for this pre-order package if you can't gather more resources to generate these addresses in a timely manner.  In 4 more months it will be a full year.

I don't know you in person but if I did I probably wouldn't be so antsy.  It's just that you've had our funds for quite some time and I literally have nothing to show from this pre-order.



I paid 1.333BTC for the pre-order package, I will be expecting that amount if someone wants to take my spot.

I see you ordered the largest package.  I could ship the other items in your package now and ship the gold highlighted coin upon generating the address.  It seems the majority of people want to wait for the proper address generation and I would hate to mess up the series for 1 squeaky wheel.  While it is unfortunate that luck has not been on my side in generating the addresses in the expected time frame, I think I have made great efforts to try and resolve this.  I will continue running the 4 GPUs in operation now and will look at options for upgrading.  Unfortunately, I don't have unlimited electricity and cooling, so the mining operation actually providing BTC for these coins understandably takes a bit of a front seat to the address generation, which you should appreciate.  I would also like to engrave these coins in order, so as soon as 1nastyau1 is found, I will begin engraving (and shipping) the coins.  As of now, that address has not been found.  When it is found I will certainly update the thread.

Anyone with a pre-order package can have the other items shipped immediately while we wait for the gold highlighted coins.

I would have thought it to be in your best interest to get the shirts out to customers who pre-ordered.  It's free marketing in the wild if we are to wear the shirts.   ;)

I'm still really looking forward to these coins but as more time passes I feel it's best to do what you stated above and ship the items from the large packages that can be fulfilled.  I'd pay for the extra shipping if required.

Are the other 3 seats (2oz + 1oz coin) in the package being paid out currently?

Nobody has asked to have the other items shipped separately.  I've even had some people buy more items and ask that they be held until everything is ready to ship...  If you want your items shipped separately, I can do that.  PM me your address if that is the case.

The other seats are being paid out (read as: will be).  They are all engraved, in airtites, and bundled up in a ziplock bag in my safe waiting to be shipped.

That's fine, I will request for my items minus the Gold Highlighted coin to be shipped.

Thanks for the clarification on the other coins.

I've prepared your items for shipment and updated this list on the OP of coins still remaining to be shipped.

Much appreciated, looking forward to seeing the 2oz coin in person!

I now have 23 1nastyau addresses (25 are needed).  However, out of those 23, only 7 of them have the correct following sequential character.  With any luck, I'll hit 1nastyau1 soon and can begin getting some of these packages out the door.

I had a motherboard die last week, which caused a drop in the generation rate, but I installed a new one last night and it is now up and running for a total of 135Mkey/s.  I think that is pushing the limits of the amount of heat I can handle alongside my mining equipment, as it is currently 115 degrees outside.  With any luck, we'll get a lucky streak soon.  My apologies again for the delay.  I'm spending hundreds per month on electricity to try and get these addresses.  Hopefully the difficult vanity addresses mean as much to you all as it does to me.

Thanks for the update and I'm happy to wait much more time knowing the rest of the pre-order is on the way.

I appreciate it and hopefully luck for the 1st address comes with the motherboard fix.   :)

You should receive it today.  I'm looking forward to seeing a picture of your 2oz coin.  There aren't many pictures in the wild yet and I like the image you grabbed below of your 1oz coin.

https://talkimg.com/images/2024/01/11/3Z3sw.jpeg

Thanks for the compliment on the image, I got everything in today and the 2oz coin looks great!

Really looking forward to the highlighted 2oz version and I'll have to get a picture of this 2oz'er sometime.  :)

The first batch of Gold Highlighted coins has shipped.  Please don't hesitate to post pictures and opinions when you receive them.

The gold highlights came out awesome, really nice looking coin and a great addition to the collection.  :)

Awesome pictures of my favorite coin.  Thanks digicoinuser!  ;D

I've upgraded the vanitygen computer to 150Mkey/s.  8/25 gold highlighted coins have now been created.

I took these pictures back on 6-28, but I forgot to post them  :-[
digicoinuser's pics look better anyway.  :D

Click on them to see higher resolution.
http://nastymonitor.zachmonroe.com/2ozCoin1-small.jpg (http://nastymonitor.zachmonroe.com/2ozCoin1.jpg)
http://nastymonitor.zachmonroe.com/2ozCoin2-small.jpg (http://nastymonitor.zachmonroe.com/2ozCoin2.jpg)
http://nastymonitor.zachmonroe.com/2ozCoin3-small.jpg (http://nastymonitor.zachmonroe.com/2ozCoin3.jpg)

The plating looks really well done. Great job OgNasty!

Whoop there it is  ;D Awesome coin again.

https://i.imgur.com/ziPQLdN.jpg

"quote"

PREORDERS REMAINING TO BE SHIPPED

$500 Pre-Order Package
Fingolfin

$325 Pre-Order Package
Fingolfin

$275 Gold Highlighted Coin Only
Fingolfin


""

Hallo to all Nasty Fans  :)   ... Happy New Year and let's hope Bitcoin will have a good eight's year  ;D


1.
Ok, i've overbought the 2 OZ Minted Seats with Gold Highlight a little bit. I like to offer the the $275 pre Order Package (Coin only) for sale. I'm not sure how to price it, so i'm not going to start an auction.... 

The day i bought it, i had to pay 0.848 BTC  to OgNasty   Trx ID: 0cf0a6d95f551f06c34b9c29a28ca08903fdbed7eb45cb5a55de771a07efe0ce

So, at best, if interested, send me an PM or post your offer here.


 additional:
2.
If you are interested in the $325 Pre Order Package ( i think it was 2 OZ Minted Seat with Gold Highlight / 1 OZ Minted Seat (normal one) / a T-Schirt / and some (maybe two) 1g Silver collectors rounds.

The day i bought it, i had to pay 1.01 BTC  to OgNasty   Trx ID: 2da11c422d3158d12b3a8968f73ebf7c9320c8a06b7027ee51f0cb20c7c47e65


3.
If you are interested in the $500 Pre Order Package ( i think it was 2 OZ Minted Seat with Gold Highlight / 2 OZ Minted Seat (normal one) / 1 OZ Minted Seat (normal one) / a T-Schirt / and some (maybe two) 1g Silver collectors rounds.

The day i bought it, i had to pay 2.041 BTC  to OgNasty   Trx ID: 84b5ff6ad39a84ef04b34c1a46e5c1041a27647edb7e61b0230e132d7e266f74




But i only want to sell 1 of the 2 OZ Minted Seats with Gold Highlight .... so considering current BTC / USD exchange rate, only the first offer will make sense, i think.

So i hope i will get some offers  :D .... P.s: i'm not accepting 275$ at current exchange rate since this coin is sold out, and from a limeted production batch. To be true i like to get at least the 0.848 BTC for the "coin only" pre order package. +- a bit of course  ;)

Regarding payment. There schould be no worries since the coins are not even readily produced. So after payment Og just has to adjust the pre order list...

Best Wishes to all!

Fin

Bye the way: I've set up 120 Seats at the auction for 0.005 each, just if someone is interested.... yes i'm a bit short on coins / money

See you

I can ship single coins immediately.  I have 2 of the gold highlighted coins and all of the solid silvers ready to go.

Hi Og,

thanks for stepping in before i even ask you  :)

User: killyou72  asked in PM to buy the 2OZ Gold Highlightend Minted Seat only, so the 275 $ pre Order Package!



Hi killyou72, nice to meet you!

Thanks for that! Was very fast  :D   .... so you didn't gave me a quote so following:

Send 0.848 BTC to adress:    1DyAhuFdA571vyWHvrhBoKTQJtPouFp1qz

and as soon the transaction has 6 confirmation, OgNasty has the permission to give you the pre Order Spot for the "2 OZ Minted Seat with Gold Highlight only".

Thanks again!

If you have any further Questions, just ask....


Best Wishes! Fin

I said I would like to buy it, I didnt say I would pay what you paid in btc for it... You should have replied back to my PM instead of jumping to a conclusion that I would pay a 50% premium  on a pre-order you got.

Hi there,

i didn't jumped on an conclusion, you just didn't gave me a quote, after i sayed i'm not sure how to price it and that i dont want sell it lower then the 0.848 BTC  +- a bit ...

If you are still Interested give me a quote. But there was never a chance to buy that coin at the current conversion rate....

We will see...


Fin


Edit: typo

If you who didn't get your hands on a 4oz platinum Minted Seat...

https://talkimg.com/images/2024/01/11/sx8l2.jpeg (https://bitcointalk.org/index.php?topic=4892746.0)

...the 2oz silver Minted Seats are nearly the same size and design! 

Available now in the NastyShop (https://nastyfans.org/mint)! (https://nastyfans.org/mint (https://nastyfans.org/mint))

My camera is no where near the quality that OG and others are able to put out, but I figured there's no harm in me joining the party.

https://i.gyazo.com/a09b84234464bd337426b70836f0e635.png
https://i.gyazo.com/56b55c8fbdcd4452cd2fb9d9ed626d17.png

The engraving came out phenomenal and it feels good to have another collectible to hold onto for some years. Pleasure doing business with you again, OG! Again, don't mind the terrible picture quality; it's a really pretty coin. Will be back for at least a couple other designs.

Bill.  Nice pics.  The 2oz seat has the nicest back.   It’s my favorite of the collection.  

Shameless showing off:

https://i.imgur.com/rhlu5bQ_d.jpg?maxwidth=640&shape=thumb&fidelity=medium

Killing my ocd... shift the gold coins a little to the right  :D

Mine too. Love the 4oz gold & platinum rounds using this design also.

Don’t forget to stock up on some of the classics while the Bitcoin rate is at all time highs! I really am fond of the size of these 2oz rounds. Great addition to any precious metal or physical crypto coin collection. :)

https://nastyfans.org/mint

How do you know what year the binary rounds are from?  thanks Og

This isn’t really the right thread for this discussion, so I went ahead and answered your question with the below linked post. Thanks for your support and enjoy the binary rounds!

https://bitcointalk.org/index.php?topic=1637562.msg56592020#msg56592020

Engraving one of these coins for a buyer today and I really must say that they are exceptionally beautiful.  Easily my favorite silver coin that I've ever done.  I'm planning to give a few of them away with an upcoming giveaway to NastyFans members and will post more information once everything has been formalized.  Until then, if you're looking to spend some BTC at the all time highs, these coins aren't a bad way to do so. 

That was for me! I received it today and it is indeed exceptionally beautiful! I'm happy to add it to my collection! Thank you!

How do I link the seats to my account on nastyfans.org?

Send nonnakip a message with the coin’s public address and your NF account username here: https://nastyfans.org/post

You can find your address and copy it from here if that makes it easier: https://nastyfans.org/mint.json

Thank you very much! I love the detail in the hologram and the fact that the public address is etched into the coin. I wish I could have gotten in on the gold highlighted version. Those look extra nice!


https://i.ibb.co/TRgFzwW/image1.jpg (https://ibb.co/XpCvmWY) https://i.ibb.co/mBKjpTF/image0.jpg (https://ibb.co/z5gMdxH)

Great pics. Thank you for posting them. You can see the engraver in action here: http://youtu.be/uLUKXpaAlHM

If I remember correctly the 2oz gold highlighted rounds were some of the harder to find coins but they’re out there. I’m sure one will pop up for sale here eventually.

That's really cool to see! I didn't know about the YouTube channel. Really great to see mining being done with renewable energy!

Thanks. You can follow me on Twitter as well for the latest and greatest. @NastyMining

It has been a while since I’ve posted anything exciting but maybe that will change once I receive my Cybertruck.

Will do! I'm a Tesla fan as well and have a Model 3 Dual Motor. Now if only I could get that thing to mine Bitcoin when idle :D !

Whenever I get an order that includes one of these 2oz silver coins and get to bust them out to do some engraving, I realize just how awesome these 2oz rounds are.  They really are my favorite coin that I've made.  The design and size are perfect for this application.  If you don't own one, I'd consider scooping one up to see for yourself.  There's a reason why this was the design that was chosen for the 4oz platinum and 4oz gold rounds (and the fact that the size made it a perfect fit).  While not everyone wants to drop down the $ for the 4oz platinum version, it is nearly indistinguishable from this 2oz silver version, so if you squint you can't even really tell the difference other than the weight.  Just tell yourself it's platinum.  :)

I agree.  As an owner of several of these 2oz coins, that is truly the coolest one.   I’m one of the few with the 2oz gilt version.

As long as you don’t read the coin too closely it’s basically indistinguishable from the 4oz platinum round. :)

It’s always a surprise to me that these coins have the most unsold remaining while being the favorite of so many, myself included. Good luck for those late to the party that still want iconic collectibles I guess. ;)

Grab yours at https://NastyFans.org/mint

Where can I find out how many coins are in circulation and how many are left for sale?

You can check at: https://analyzer.nastyfans.org/

That site is run by the forum user naypalm and I’m not sure how up to date it is since I haven’t spoken with naypalm in some time, but it’s probably fairly accurate. It gets the data from https://nastyfans.org/mint.json which is provided by nonnakip and kept up to date, so if you looked at the coin type for the 2oz rounds and counted them you would get an accurate number. According to naypalm’s analyzer 100 of 250 have been sold. That leaves more remaining for sale than all other minted seats rounds combined.

Today I received a similar question via PM so I thought since I took the time to find the information I would post it here.  :)

There are currently 149 of the 2oz all silver coins left for sale in the NastyShop.  This is out of a total of 225 all silvers.  There are also 25 with gold highlighting that have all been sold.  This information is publicly available here: https://nastyfans.org/mint.json in case anyone wanted to be able to figure this information out on their own in the future.  As always, they can be purchased here: https://nastyfans.org/mint

I wanted to point out that currently these coins are priced in USD and the BTC price is adjusted to reflect that. With coins being tied to seats that are backed by BTC, it makes these coins a ‘better’ deal as the BTC price rises. As the price gets higher I’ll have to adjust the price formula to rectify this at some point before these are selling at a loss, but for now it makes the premium on all Minted Seat coins lower than they have been historically.

I’ve been contacted by someone looking for a gold highlighted 2oz round for sale. If anyone has one they’d be interested in selling, feel free to post a price you would accept to sell yours or feel free to reach out to me privately and I can put you in contact with the buyer (or maybe they would like to post here?). Thanks!

I'm just checking my coin in the analyzer, and it says it is "inactive" and doesn't appear to have been receiving payouts.

I thought minted seats were supposed to continuously receive distributions, and aren't subject to inactivity policies.

Is there something I'm missing or some action I failed to perform, or could they have forgotten to be "activated" by any chance?

it will take decades for them to reach maturity. I have had mine for years and and still under 1% towards required amount to get a payout. You need .001 accumulated (per seat) to get a payout. I am at .000059 per seat.

You'd have to ask naypalm about the analyzer site.  There is no "active" or "inactive" status for Minted Seats so I have no idea what that is referring to.  If you provide a link I'll take a look and see if I can figure out what he could mean, but as long as you have a Minted Seat, it's active.  There is nothing you have to do and no way to deactivate it.  

Actual information about seats is here: https://nastyfans.org/mint.json (this is where naypalm gets information for the analyzer, but I can't vouch for what he does with it)

As for distributions.  It's a community organization.  It will receive distributions based on what NastyFans receives, as donations are from real world activity.  If people spend their time bashing the club and not supporting those who try to raise donations for everyone's benefit, then obviously distributions will suffer.  This has been the case recently.  As always, if there's ever anything I can do to support those who want to grow this community organization, I'll go above and beyond to do whatever I can to help as I always have.  At some point I would think people will stop shooting themselves in the foot and work together to help the oldest publicly traded organization in crypto reach it's full potential, but you never know what an internet community will do...  For now people appear to prefer to bite the hand that feeds them, but I'm not going anywhere.