Bitcoin Forum

Other => Off-topic => Topic started by: HotSwap on November 02, 2012, 07:30:38 AM



Title: BFL Single - Fan Replacement
Post by: HotSwap on November 02, 2012, 07:30:38 AM
I have looked around the forum to see if anyone has a suggestion on which fan you could replace the bottom one with but i haven't found anything. SO...


1. Any suggestions on a model of fan to replace the bottom fan with?
2. Is the bottom heat sink just stuck on with thermal tape? It doesn't seem to have any screws other then the fan itself.


Thanks!


Title: Re: BFL Single - Fan Replacement
Post by: Askit2 on November 02, 2012, 07:50:29 AM
2 or 3 fan unit?
Heatsink fan combo or just a casefan?
Pretty sure there was a guy that replaced fans on his but he replaced casefans and would hate to dig up the post to find out you need a different fan.


Title: Re: BFL Single - Fan Replacement
Post by: Unacceptable on November 02, 2012, 07:51:14 AM
Just about any 92mm fan that uses at or very near the same wattage will work.Cut the wires & resolder with heat shrink around them to keep from shorting.

If you try to use a fan consuming more wattage you may fry something in your Single  :o

Not sure about how the bottom heat sink is attached.Mine works fine,so I haven't messed with it,even after 6 months  :o


Title: Re: BFL Single - Fan Replacement
Post by: HotSwap on November 02, 2012, 08:28:05 AM
2 or 3 fan unit?
Heatsink fan combo or just a casefan?
Pretty sure there was a guy that replaced fans on his but he replaced casefans and would hate to dig up the post to find out you need a different fan.

No the bottom fan not the 92mm case fan on top. Its like a 36mm fan.


Title: Re: BFL Single - Fan Replacement
Post by: Unacceptable on November 02, 2012, 09:57:43 AM
Opps,my bad,I thought most came with 3 fans  ::)

Is this close to it ??

http://www.aliexpress.com/item/PC-VGA-Card-Mini-Heatsink-Cooler-Cooling-Fan-36-mm-2-Pin-Equilateral-Triangle-Free-Shipping/489961987.html

It's all I can find for now,I'll keep looking  ;)

The HS/fan seems to be glued or is stuck on with some really good stuff.

Shouldn't have to remove the whole HS/fan,just unscrew the 3 screws & swap it.


Title: Re: BFL Single - Fan Replacement
Post by: BFL on November 02, 2012, 12:36:03 PM
Opps,my bad,I thought most came with 3 fans  ::)

Is this close to it ??

http://www.aliexpress.com/item/PC-VGA-Card-Mini-Heatsink-Cooler-Cooling-Fan-36-mm-2-Pin-Equilateral-Triangle-Free-Shipping/489961987.html

It's all I can find for now,I'll keep looking  ;)

The HS/fan seems to be glued or is stuck on with some really good stuff.

Shouldn't have to remove the whole HS/fan,just unscrew the 3 screws & swap it.

If anyone has a need for replacement fans - either top or bottom.  Please write office@butterflylabs.com and ask.  We'll be happy to send them out free of charge.


Title: Re: BFL Single - Fan Replacement
Post by: crazyates on November 02, 2012, 10:09:24 PM
2. Is the bottom heat sink just stuck on with thermal tape?
From what I can tell yes. I actually have a 79mm fan blowing onto that small heatsink, and it helps with the temps a tiny bit.


Title: Re: BFL Single - Fan Replacement
Post by: panda1 on November 02, 2012, 10:18:46 PM

If anyone has a need for replacement fans - either top or bottom.  Please write office@butterflylabs.com and ask.  We'll be happy to send them out free of charge.

Awesome!!


Title: Re: BFL Single - Fan Replacement
Post by: Fiyasko on November 03, 2012, 05:49:28 AM
Opps,my bad,I thought most came with 3 fans  ::)

Is this close to it ??

http://www.aliexpress.com/item/PC-VGA-Card-Mini-Heatsink-Cooler-Cooling-Fan-36-mm-2-Pin-Equilateral-Triangle-Free-Shipping/489961987.html

It's all I can find for now,I'll keep looking  ;)

The HS/fan seems to be glued or is stuck on with some really good stuff.

Shouldn't have to remove the whole HS/fan,just unscrew the 3 screws & swap it.

If anyone has a need for replacement fans - either top or bottom.  Please write office@butterflylabs.com and ask.  We'll be happy to send them out free of charge.
The butterfly effect!


Title: Re: BFL Single - Fan Replacement
Post by: HotSwap on November 03, 2012, 07:44:25 AM
Opps,my bad,I thought most came with 3 fans  ::)

Is this close to it ??

http://www.aliexpress.com/item/PC-VGA-Card-Mini-Heatsink-Cooler-Cooling-Fan-36-mm-2-Pin-Equilateral-Triangle-Free-Shipping/489961987.html

It's all I can find for now,I'll keep looking  ;)

The HS/fan seems to be glued or is stuck on with some really good stuff.

Shouldn't have to remove the whole HS/fan,just unscrew the 3 screws & swap it.

Yeap it is very close to this one, I couldn't find one anywhere so i just removed it and stuck on another 92mm. Keeps it nice and cool for now but i will need to get a replacement before i upgrade. The fan is basicly destroyed from me removing it. For some reason 1 screw was striped for i had to use some other ways to get it off....

Thanks for the help


Title: Re: BFL Single - Fan Replacement
Post by: HotSwap on November 03, 2012, 07:46:25 AM
Opps,my bad,I thought most came with 3 fans  ::)

Is this close to it ??

http://www.aliexpress.com/item/PC-VGA-Card-Mini-Heatsink-Cooler-Cooling-Fan-36-mm-2-Pin-Equilateral-Triangle-Free-Shipping/489961987.html

It's all I can find for now,I'll keep looking  ;)

The HS/fan seems to be glued or is stuck on with some really good stuff.

Shouldn't have to remove the whole HS/fan,just unscrew the 3 screws & swap it.

If anyone has a need for replacement fans - either top or bottom.  Please write office@butterflylabs.com and ask.  We'll be happy to send them out free of charge.

Question is do you (BFL) need the fan sent back in order to get a replacement? because i have already thrown it away since it was dead.

Thanks!


Title: Re: BFL Single - Fan Replacement
Post by: BFL on November 03, 2012, 02:03:58 PM
Opps,my bad,I thought most came with 3 fans  ::)

Is this close to it ??

http://www.aliexpress.com/item/PC-VGA-Card-Mini-Heatsink-Cooler-Cooling-Fan-36-mm-2-Pin-Equilateral-Triangle-Free-Shipping/489961987.html

It's all I can find for now,I'll keep looking  ;)

The HS/fan seems to be glued or is stuck on with some really good stuff.

Shouldn't have to remove the whole HS/fan,just unscrew the 3 screws & swap it.

If anyone has a need for replacement fans - either top or bottom.  Please write office@butterflylabs.com and ask.  We'll be happy to send them out free of charge.

Question is do you (BFL) need the fan sent back in order to get a replacement? because i have already thrown it away since it was dead.

Thanks!

You don't have to send in a your old fan.  



Title: Re: BFL Single - Fan Replacement
Post by: HotSwap on November 03, 2012, 06:49:30 PM
Opps,my bad,I thought most came with 3 fans  ::)

Is this close to it ??

http://www.aliexpress.com/item/PC-VGA-Card-Mini-Heatsink-Cooler-Cooling-Fan-36-mm-2-Pin-Equilateral-Triangle-Free-Shipping/489961987.html

It's all I can find for now,I'll keep looking  ;)

The HS/fan seems to be glued or is stuck on with some really good stuff.

Shouldn't have to remove the whole HS/fan,just unscrew the 3 screws & swap it.

If anyone has a need for replacement fans - either top or bottom.  Please write office@butterflylabs.com and ask.  We'll be happy to send them out free of charge.

You don't have to send in a your old fan. 

Question is do you (BFL) need the fan sent back in order to get a replacement? because i have already thrown it away since it was dead.

Thanks!

Thank you, I have requested a new one. In the mean time the 2nd 92mm fan is working great.


Title: Re: BFL Single - Fan Replacement
Post by: davecoin on November 09, 2012, 12:39:48 AM
I had the bottom fan go out on my single.  I sent a request and 2 days later I received a package with 2 replacement bottom fans and 1 top fan. 

I honestly was not expecting to get them for free, but I'm thankful I did.

-Dave


Title: Re: BFL Single - Fan Replacement
Post by: HotSwap on November 09, 2012, 02:44:04 AM
I had the bottom fan go out on my single.  I sent a request and 2 days later I received a package with 2 replacement bottom fans and 1 top fan. 

I honestly was not expecting to get them for free, but I'm thankful I did.

-Dave

Same here! mine is in the mail as we speak.

Thanks BFL


Title: Re: BFL Single - Fan Replacement
Post by: Unacceptable on November 09, 2012, 06:55:21 AM
I had the bottom fan go out on my single.  I sent a request and 2 days later I received a package with 2 replacement bottom fans and 1 top fan.  

I honestly was not expecting to get them for free, but I'm thankful I did.

-Dave

I disassembled my FPGA Single for the first time after reading this thread to check my bottom heatsink fan,it was dead too.So I emailed BFL & they wrote back "its on its way".Sure enough 3 working days later I got my new fan & a 92mm one also  :o

I need to get some small heatshrink tubing to resolder my wires,like the unit is now & I'll be back in bidness boi  8)