|
Title: Antminer S2 Help Post by: left-ca on November 03, 2015, 01:48:57 AM Hello,
Im in college and none of my ethernet ports in my room are enabled. How can i get my Antminer S2 to connect to my computer so i can use my wifis computer to mine. (sharing connections is disabled). Could i change the stripped down Beaglebone Black Rev and put in an actual one and then connect the usb port to my computer and use cgminer? Title: Re: Antminer S2 Help Post by: adaseb on November 03, 2015, 02:45:17 AM Connect laptop to WIFI, enable ICS and then plug in the Antminer S2.
Make sure you configure the S2 to run on Subnet 192.168.137.X Title: Re: Antminer S2 Help Post by: left-ca on November 03, 2015, 07:16:26 PM It didnt work...the ip that pops up on my s2 is 127.0.0.1 and i cant connect too it. Ill give you .02 btc if you can help me through it
Title: Re: Antminer S2 Help Post by: left-ca on November 03, 2015, 07:16:49 PM but my other question would i be able to mine to cgminer via usb cable to my computer if i upgraded the beaglebone?
Title: Re: Antminer S2 Help Post by: H3nk on November 03, 2015, 07:37:24 PM Did u check, whether the wired LAN adapter on your computer really has it's own subnet?
Title: Re: Antminer S2 Help Post by: Pug on November 03, 2015, 09:06:02 PM -
Title: Re: Antminer S2 Help Post by: left-ca on November 04, 2015, 12:19:38 AM I bought a router and configured it, my computers wifi sends the signal to the ethernet to the router. And the router connects to my antminer. I use my phone and connect to the router so both the antminer and phone are connected. But on my phone i cant connect to either the antminer or router. I dont know what to do. The miner mines fine, but i have it geard at an old pool which isnt around anymore and i need to get to the miners settings to change to antpool
Title: Re: Antminer S2 Help Post by: Pug on November 04, 2015, 06:45:15 AM -
|