Bitcoin Forum

Economy => Computer hardware => Topic started by: Sweminer777 on November 07, 2015, 05:48:21 PM



Title: WTB Beaglebone board
Post by: Sweminer777 on November 07, 2015, 05:48:21 PM
Seeking a beaglebone board to replace my dead from the antminer controller  ::)


Title: Re: WTB Beaglebone board
Post by: Tupsu on November 07, 2015, 10:22:09 PM
Seeking a beaglebone board to replace my dead from the antminer controller  ::)

Miner Parts for sale

S5 Controller board (BeagleBone board only)

50.- USD + shipping costs


https://i.imgur.com/CLh1pHd.jpg (https://i.imgur.com/CLh1pHd.jpg)
Click to enlarge
....................................................

https://bitcointalk.org/index.php?topic=858962.0


Title: Re: WTB Beaglebone board
Post by: Sweminer777 on November 07, 2015, 11:39:06 PM
Seeking a beaglebone board to replace my dead from the antminer controller  ::)

Miner Parts for sale

S5 Controller board (BeagleBone board only)

50.- USD + shipping costs


https://i.imgur.com/CLh1pHd.jpg (https://i.imgur.com/CLh1pHd.jpg)
Click to enlarge
....................................................

https://bitcointalk.org/index.php?topic=858962.0

I guess it's from usa?, abit expensive new cost 50usd + shipping ;). i have one closer will checki whit him first.


Title: Re: WTB Beaglebone board
Post by: Tupsu on November 08, 2015, 12:06:27 AM




I guess it's from usa?, abit expensive new cost 50usd + shipping ;). i have one closer will checki whit him first.

This is new.  Shipping Costs is 9 euro, if you do not like the dollar price.
Shipping time - Tuesday from Estonia.

But you are always free to buy it from Bitmain USA on China. (50USD + shipping + VAT )


Title: Re: WTB Beaglebone board
Post by: Sweminer777 on November 08, 2015, 03:00:12 AM




I guess it's from usa?, abit expensive new cost 50usd + shipping ;). i have one closer will checki whit him first.

This is new.  Shipping Costs is 9 euro, if you do not like the dollar price.
Shipping time - Tuesday from Estonia.

But you are always free to buy it from Bitmain USA on China. (50USD + shipping + VAT )


beaglebones i can find for 50-60usd from stores.

i could do 25usd + shipping for yours.


Title: Re: WTB Beaglebone board
Post by: padrino on November 08, 2015, 03:57:14 AM




I guess it's from usa?, abit expensive new cost 50usd + shipping ;). i have one closer will checki whit him first.

This is new.  Shipping Costs is 9 euro, if you do not like the dollar price.
Shipping time - Tuesday from Estonia.

But you are always free to buy it from Bitmain USA on China. (50USD + shipping + VAT )


beaglebones i can find for 50-60usd from stores.

i could do 25usd + shipping for yours.

So you quote a price twice as high as your offer? Not good at negotiating are you?


Title: Re: WTB Beaglebone board
Post by: Sweminer777 on November 08, 2015, 05:30:19 AM




I guess it's from usa?, abit expensive new cost 50usd + shipping ;). i have one closer will checki whit him first.

This is new.  Shipping Costs is 9 euro, if you do not like the dollar price.
Shipping time - Tuesday from Estonia.

But you are always free to buy it from Bitmain USA on China. (50USD + shipping + VAT )


beaglebones i can find for 50-60usd from stores.

i could do 25usd + shipping for yours.

So you quote a price twice as high as your offer? Not good at negotiating are you?

What do you mean?.


I am getting offers on 50usd, and on local stores and internet they cost that.

Why would i pay 50usd for a used one from the other side of the world?.


Half price is more than fair, i am not getting any warranty here.

i am ready to spend my money, just need someone to take it ;)


Title: Re: WTB Beaglebone board
Post by: Tupsu on November 08, 2015, 10:26:10 AM

What do you mean?.


I am getting offers on 50usd, and on local stores and internet they cost that.

Why would i pay 50usd for a used one from the other side of the world?.


Half price is more than fair, i am not getting any warranty here.

i am ready to spend my money, just need someone to take it ;)

I already wrote , that this BBB is new.  It is not used.
But forget about my offer.

..... and I am asking $100 each on the controller boards. ....

Buy it here

https://bitcointalk.org/index.php?topic=1240873.0

it runs at least with S5.
In contrast to this, which you can get from your local stores.

...
If you want BBB, then I have two used from KNC controllers, 10 USD from piece.
...


2 x KNC Jupiter BBB (BeagleBone board only)

https://i.imgur.com/ENZJ2B3.jpg (https://i.imgur.com/ENZJ2B3.jpg)
Click to enlarge

20USD+ shipping for both


Title: Re: WTB Beaglebone board
Post by: Sweminer777 on November 08, 2015, 11:39:37 AM

What do you mean?.


I am getting offers on 50usd, and on local stores and internet they cost that.

Why would i pay 50usd for a used one from the other side of the world?.


Half price is more than fair, i am not getting any warranty here.

i am ready to spend my money, just need someone to take it ;)

I already wrote , that this BBB is new.  It is not used.
But forget about my offer.

..... and I am asking $100 each on the controller boards. ....

Buy it here

https://bitcointalk.org/index.php?topic=1240873.0

it runs at least with S5.
In contrast to this, which you can get from your local stores.

...
If you want BBB, then I have two used from KNC controllers, 10 USD from piece.
...


2 x KNC Jupiter BBB (BeagleBone board only)

https://i.imgur.com/ENZJ2B3.jpg (https://i.imgur.com/ENZJ2B3.jpg)
Click to enlarge

20USD+ shipping for both


okey i take them from knc. coul you sell 2x large s5 cables too?


Title: Re: WTB Beaglebone board
Post by: Tupsu on November 08, 2015, 03:32:28 PM

okey i take them from knc. coul you sell 2x large s5 cables too?

Do you still understand, that they have the KNC software ?
How   to install them S5 software, I do not know and I do not know if this is possible at all.

The screenshot  is made with  KNC BBB and S5 controller baseplate with  KNC software.


Title: Re: WTB Beaglebone board
Post by: Sweminer777 on November 08, 2015, 04:41:25 PM

okey i take them from knc. coul you sell 2x large s5 cables too?

Do you still understand, that they have the KNC software ?
How   to install them S5 software, I do not know and I do not know if this is possible at all.

The screenshot  is made with  KNC BBB and S5 controller baseplate with  KNC software.


is unerstood, ill take them. did you want to sell some large cables to me ?