|
Title: Problem with an Antminer S5 blade - Help please Post by: esawyja on November 09, 2015, 09:58:20 AM Hi all,
Can someone provide me with some troubleshooting tips on a S5 blade V1.91 2015-03-28 (With Mini Heatsinks)? The fault moves with the board, IE I have moved the cables around, physically moved the board around to the other side of the controller and re-pasted the thermal grease on the ASICs. There seems to be a RED LED on the blade that works, I don't see it lit on the faulty board. The web interface displays ----- or xxxxx, I've even moved the cables to the inner ports on the controller board, all this seems to do it to change from chain 0 to 1, Are there any Voltage regulators on the blade maybe, something I can check, or voltage readings on the test pads? Any suggestions please Regards Title: Re: Problem with an Antminer S5 blade - Help please Post by: XERES on November 09, 2015, 01:40:21 PM contact antminer support directly if they cant help you may just have a faulty blade, which you might be able to sell for a few bucks
|