Title: Antminer S7 Underclock? Post by: left-ca on December 01, 2015, 12:32:08 AM Is there a way to lower the antminer s7 to under-clock it to around 4th/s. I dont really care about efficiency but its just so loud and i would prefer it a bit quieter. Thanks
Title: Re: Antminer S7 Underclock? Post by: philipma1957 on December 01, 2015, 12:42:25 AM Is there a way to lower the antminer s7 to under-clock it to around 4th/s. I dont really care about efficiency but its just so loud and i would prefer it a bit quieter. Thanks yesI will post how for you. Set. Freq to 500 Set fans to 30% Check your numbers after five ten minutes. You should be close to 4000gh close to fan speed of 2800rpm Temps should be under 60c for safety Title: Re: Antminer S7 Underclock? Post by: Tupsu on December 01, 2015, 12:49:28 AM Antminer S7 Batch 8 at Frequency 600 is 4,047 MH/s
But I suggest to use miners from Batch1-5 or Batch7 at lower frequency. Title: Re: Antminer S7 Underclock? Post by: philipma1957 on December 01, 2015, 12:56:52 AM Antminer S7 Batch 8 at Frequency 600 is 4,047 MH/s But I suggest to use miners from Batch1-5 or Batch7 at lower frequency. good point my info was for a batch 1 and batch 2 miner. screen shot is below is my batch 1 miner fan at 30% freq at 506 hash at 4175 temps are good pretty quiet lastly 0 hw's as in perfect. https://i.imgur.com/Z0TVxuM.png Title: Re: Antminer S7 Underclock? Post by: left-ca on December 01, 2015, 06:55:40 PM Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac)
Title: Re: Antminer S7 Underclock? Post by: blockchainmines on December 01, 2015, 06:59:40 PM Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac) I am assuming that since you are moving you miner around between different networks that you are leaving it set to DHCP right? Title: Re: Antminer S7 Underclock? Post by: left-ca on December 01, 2015, 07:07:16 PM I dont know what it was set to, i didnt change the default setting though
Title: Re: Antminer S7 Underclock? Post by: philipma1957 on December 01, 2015, 07:19:03 PM Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac) mac has an ip appIt is on the App Store Title: Re: Antminer S7 Underclock? Post by: lovenlifelarge on December 06, 2015, 03:41:12 AM Alternately take the miner home & set the ip to a static one so when u move it to another network u can still get access to it to change the ip address to suit you network if necessary once moved
Title: Re: Antminer S7 Underclock? Post by: Biodom on December 06, 2015, 04:40:37 AM Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac) advanced-IP-scanner on XP On Mac I use iNET-$9.99 in App store (bought it before for $4.99), works great Title: Re: Antminer S7 Underclock? Post by: fr4nkthetank on December 07, 2015, 02:54:12 PM you can also download a program called FING, it works great to find all connected ip. or just go in your router, and check connected devices.
Title: Re: Antminer S7 Underclock? Post by: fred96002001 on January 22, 2017, 08:21:12 PM what is the lowest block speed it will run on? i need to run it at 300 what kind of ghs do you think i would get for 1 board at 300? 750 ghs? going to replace the bad s5 boards with 1 s7 board and if possable use my s5 fan' and heat sink for a more efficent mine.
|