Bitcoin Forum

Economy => Computer hardware => Topic started by: gecox22 on December 04, 2015, 01:24:35 AM



Title: WTB 1ths or more Miner
Post by: gecox22 on December 04, 2015, 01:24:35 AM
Just as he subject reads looking for a miner around 1 ths miner nothing below. Really don' want a  cointerra terraminer due to how loud it is. I have free power so efficiency isn't too much of a worry for me. Must be under 200 in btc I would like shipping included but is not a deal breaker. So if you have anything you would like to get rid of let me know here or though PM. Trusted users always a plus, no trust users will be escrow only.

Thanks


Title: Re: WTB 1ths Miner
Post by: MCHouston on December 04, 2015, 04:06:06 AM
Will you take over 1Th Units?


Title: Re: WTB 1ths Miner
Post by: adaseb on December 04, 2015, 04:07:39 AM
Your best bet would be an Antminer S2. They are exactly 1TH/s and have the PSU already built in.

There are many on eBay for around $200


Title: Re: WTB 1ths Miner
Post by: xZork on December 04, 2015, 06:14:58 AM
I'll sell you an S2 in good working order for .5 BTC you pay shipping and escrow.

Miner is not in my home, here is a screen shot of pool performance.

http://imgur.com/XhWX9Dw


Title: Re: WTB 1ths Miner
Post by: gecox22 on December 04, 2015, 09:22:50 AM
Will you take over 1Th Units?

Of course. I will.(changed the subject) I would love anything over 1ths just figured with my budget it would be harder to find. If you have something over 1ths and wanna work out a deal hit me up for sure.

I'll sell you an S2 in good working order for .5 BTC you pay shipping and escrow.

Miner is not in my home, here is a screen shot of pool performance.

http://imgur.com/XhWX9Dw

Where is it and why is it not in your home? Is it  due to noise level or something else?


Title: Re: WTB 1ths Miner
Post by: ncsupanda on December 04, 2015, 05:02:07 PM
Will you take over 1Th Units?

Of course. I will.(changed the subject) I would love anything over 1ths just figured with my budget it would be harder to find. If you have something over 1ths and wanna work out a deal hit me up for sure.

I'll sell you an S2 in good working order for .5 BTC you pay shipping and escrow.

Miner is not in my home, here is a screen shot of pool performance.

http://imgur.com/XhWX9Dw

Where is it and why is it not in your home? Is it  due to noise level or something else?

Just a note on the noise level - It's high.

I will note that despite this fact it is much more tolerable than most since it is more of a hollow sound than a whining noise you may get with some miners.


Title: Re: WTB 1ths Miner
Post by: VirosaGITS on December 04, 2015, 06:22:39 PM
Will you take over 1Th Units?

Of course. I will.(changed the subject) I would love anything over 1ths just figured with my budget it would be harder to find. If you have something over 1ths and wanna work out a deal hit me up for sure.

I'll sell you an S2 in good working order for .5 BTC you pay shipping and escrow.

Miner is not in my home, here is a screen shot of pool performance.

http://imgur.com/XhWX9Dw

Where is it and why is it not in your home? Is it  due to noise level or something else?

If you're mining at home, your best bet might be Antminer S3's(440-500ghs). If you have a cool area and can get a second fan, S5 can do too, but its not *as* quiet. It won't be if its put somewhere hot.

A S5 print modded with 2 good aftermarket fans might be very nice though.


Title: Re: WTB 1ths Miner
Post by: gecox22 on December 04, 2015, 06:54:57 PM
Will you take over 1Th Units?

Of course. I will.(changed the subject) I would love anything over 1ths just figured with my budget it would be harder to find. If you have something over 1ths and wanna work out a deal hit me up for sure.

I'll sell you an S2 in good working order for .5 BTC you pay shipping and escrow.

Miner is not in my home, here is a screen shot of pool performance.

http://imgur.com/XhWX9Dw

Where is it and why is it not in your home? Is it  due to noise level or something else?

If you're mining at home, your best bet might be Antminer S3's(440-500ghs). If you have a cool area and can get a second fan, S5 can do too, but its not *as* quiet. It won't be if its put somewhere hot.

A S5 print modded with 2 good aftermarket fans might be very nice though.

Yep basement mining in the north east. So always cool here. My s3' currently run around 38 c most of the time highest has been 40 in the summer. I have three s3's was looking for something bigger. My server psu,'s are louder than my s3's I think.

Still looking if any one has anything to offer.


Title: Re: WTB 1ths or more Miner
Post by: MRKLYE on December 04, 2015, 06:56:15 PM
Honestly you're better off just buying BTC unless you have access to free electricity. Mining game has gone to hell since ASIC.

I know the idea of money printers may seem sweet. but at the end of the day its the guys selling the stuff that are making the money.


Title: Re: WTB 1ths or more Miner
Post by: gecox22 on December 04, 2015, 07:08:08 PM
Honestly you're better off just buying BTC unless you have access to free electricity. Mining game has gone to hell since ASIC.

I know the idea of money printers may seem sweet. but at the end of the day its the guys selling the stuff that are making the money.

Thank you for adding nothing to my thread beside adding to your post count for your signature campaign.  If you would have read my first post it stated  I have free power so efficiency isn't too much of a worry for me.


Title: Re: WTB 1ths Miner
Post by: VirosaGITS on December 04, 2015, 07:21:15 PM
Will you take over 1Th Units?

Of course. I will.(changed the subject) I would love anything over 1ths just figured with my budget it would be harder to find. If you have something over 1ths and wanna work out a deal hit me up for sure.

I'll sell you an S2 in good working order for .5 BTC you pay shipping and escrow.

Miner is not in my home, here is a screen shot of pool performance.

http://imgur.com/XhWX9Dw

Where is it and why is it not in your home? Is it  due to noise level or something else?

If you're mining at home, your best bet might be Antminer S3's(440-500ghs). If you have a cool area and can get a second fan, S5 can do too, but its not *as* quiet. It won't be if its put somewhere hot.

A S5 print modded with 2 good aftermarket fans might be very nice though.

Yep basement mining in the north east. So always cool here. My s3' currently run around 38 c most of the time highest has been 40 in the summer. I have three s3's was looking for something bigger. My server psu,'s are louder than my s3's I think.

Still looking if any one has anything to offer.

Okay, then you're set, but keep in mind it will not not matter how cool your basement is when you start piling these up. It will heat up your whole house like a sauna. Its winter outside and i have trouble getting enough air in and out the living room to keep all the miners cool and i only have an handful.

TLDR: at some point you will probably be able to keep your whole house warm, and if you keep adding, you will have to introduce some air flow to dumb down the heat.

Since you seem to want 1th+ to minimise micro management, S2(S3 would be better but its not 1th) at your budget would work but i would recommend you save up/switch to S4/S5 asap.


Title: Re: WTB 1ths or more Miner
Post by: MCHouston on December 04, 2015, 09:29:06 PM
Where would this be shipping to?  I have C1, S2 in the 1Th range.  Many more miners above 1Th SP20, S4, S5, etc etc


Title: Re: WTB 1ths or more Miner
Post by: adaseb on December 04, 2015, 11:51:24 PM
The S2 is almost the same noise level as the S3.

If you remove the cover and pull the 10th blade, its even quieter (at 900Gh/s)



Title: Re: WTB 1ths or more Miner
Post by: gecox22 on December 05, 2015, 12:19:51 AM
Where would this be shipping to?  I have C1, S2 in the 1Th range.  Many more miners above 1Th SP20, S4, S5, etc etc

Shipping to 03582


Title: Re: WTB 1ths or more Miner
Post by: nitehawk on December 05, 2015, 08:13:39 PM
hell ive got a bunch of old equipement in the garage collecting dust..

few cointerra units 3 or 4 ant miners ( i want to say s2 or later) 
and a jupiter which i may or may not repurpose


Title: Re: WTB 1ths or more Miner
Post by: nitehawk on December 05, 2015, 08:14:36 PM
ohh i i missed the 1th part sorry disregard


Title: Re: WTB 1ths or more Miner
Post by: mindtrip on December 05, 2015, 11:33:22 PM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips


Title: Re: WTB 1ths or more Miner
Post by: realestone on December 06, 2015, 12:33:27 AM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips

price on each?


Title: Re: WTB 1ths or more Miner
Post by: gecox22 on December 06, 2015, 01:15:07 AM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips

How much for the c1's? including shipping to 03582


Title: Re: WTB 1ths or more Miner
Post by: mindtrip on December 06, 2015, 01:28:08 AM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips

price on each?

0.57 BTC plus shipping from 11501 I can estimate shipping cost if you PM me your zip and prefered shipping method either UPS or USPS


Title: Re: WTB 1ths or more Miner
Post by: mindtrip on December 06, 2015, 01:30:29 AM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips

How much for the c1's? including shipping to 03582

0.6366 BTC shipped UPS


Title: Re: WTB 1ths or more Miner
Post by: gecox22 on December 06, 2015, 03:18:55 AM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips

How much for the c1's? including shipping to 03582

0.6366 BTC shipped UPS

263 shipping included is out of my price range and a little expensive for my taste. I want to thank you for your offer But I will have to pass. I can do 150 for the C1. 

Still Looking for anything 1ths or above. Budget around 200 BTC. I would like shipping included. If not maybe we can work out a deal.

Thanks


Title: Re: WTB 1ths or more Miner
Post by: xZork on December 06, 2015, 07:22:10 AM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips

How much for the c1's? including shipping to 03582

0.6366 BTC shipped UPS

263 shipping included is out of my price range and a little expensive for my taste. I want to thank you for your offer But I will have to pass. I can do 150 for the C1. 

Still Looking for anything 1ths or above. Budget around 200 BTC. I would like shipping included. If not maybe we can work out a deal.

Thanks

Anything at 1TH is going to be old and heavy. Your only luck is finding some one that you can do a local pick up because shipping is going to kill your price range. If you can, up your price and try to pick up a sp20 if you can find someone wanting to sell one. they are fairly light compared to performance. Maybe an S4 if it is local... my biggest mistake in this game was selling my S4's.


Title: Re: WTB 1ths or more Miner
Post by: mindtrip on December 06, 2015, 07:33:20 AM
I have 1 S2' and 2 x C1 Liquid cooled miner they are both 1TH i would be willing to sell. I think shipping the C1 might be easier and its a little more efficient based on the S3 chips

How much for the c1's? including shipping to 03582

0.6366 BTC shipped UPS

263 shipping included is out of my price range and a little expensive for my taste. I want to thank you for your offer But I will have to pass. I can do 150 for the C1. 

Still Looking for anything 1ths or above. Budget around 200 BTC. I would like shipping included. If not maybe we can work out a deal.

Thanks

Shipping is expensive on this guy I am in NY I can do better if local pick is an option for you? I just did a sale of  bunch of S3's to another forum member we were 200 miles apart we met half way I am willing to do the same to help out on shipping costs. If you were interested in both could work out a package deal and cut the price down a bit.