Bitcoin Forum

Economy => Computer hardware => Topic started by: helipotte on January 17, 2016, 03:13:54 PM



Title: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 17, 2016, 03:13:54 PM
Prefer US sellers due to shipping costs.  Can arrange pickup if you are close.

Types of things I am interested in:

Water-cooled miners with a non-functioning water cooling system.

Miners that don't power on / do nothing.

Miners that come on, but misbehave in some way(s).

Miners that have dead chips or hash at a lower than expected rate.

Scrypt or sha-256 are OK.

Prefer complete miners, but let me know what you have.

Would be willing to pay shipping, escrow, and small amount for trouble of packaging.  Would pay more for miners that only have small problems.

Thanks!

Edit00: Have had some offer me gridseed pods.  I have lots of those but would be intersted in a G-blade.  Working or not. ;)

Edit01: Due to difficulty increases, only looking for broken newer stuff.  Thanks to everyone for your offers!


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: mindtrip on January 19, 2016, 03:41:23 AM
I got some old grid seed 5 chip miners some dead, some work, some under perform


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 19, 2016, 03:46:38 PM
I got some old grid seed 5 chip miners some dead, some work, some under perform

PM sent.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: OregonMines.com on January 19, 2016, 08:44:50 PM
Any interest in more Monarchs?


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 19, 2016, 09:12:42 PM
Any interest in more Monarchs?

Sent PM.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: quakefiend420 on January 19, 2016, 09:54:59 PM
I have a Neptune cube that is recognized but doesn't hash.  PM me.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: Romanko on January 20, 2016, 12:06:05 AM
Hey have a lot of that stuff))
1. 3 pics Prismas of 1,4TH, some with burned chips, not many useful part there)) BE controller ok works with two blades at 0.7 TH
2. XBET 3.2 TH miner works at 1,6TH and I think can be repaired.
3. R3 - 450GH - 3 pieces - miners are ok, but the controller doesnt power on.
4. Rockminer T1 - have 3 cubes at 2 TH ( 2 cubes work ok, and the third one from time to time)
5. KNC cubes - they hash as they want some 1/2, 1/4, -/-))
6. and of course KNC controllers that dont see the cubes - 4 pics. BB's are ok.


P.S. By the way if somebody has KNC neptune controller I might be interested!


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 20, 2016, 12:51:34 AM
Hey have a lot of that stuff))
1. 3 pics Prismas of 1,4TH, some with burned chips, not many useful part there)) BE controller ok works with two blades at 0.7 TH
2. XBET 3.2 TH miner works at 1,6TH and I think can be repaired.
3. R3 - 450GH - 3 pieces - miners are ok, but the controller doesnt power on.
4. Rockminer T1 - have 3 cubes at 2 TH ( 2 cubes work ok, and the third one from time to time)
5. KNC cubes - they hash as they want some 1/2, 1/4, -/-))
6. and of course KNC controllers that dont see the cubes - 4 pics. BB's are ok.


P.S. By the way if somebody has KNC neptune controller I might be interested!

PM Sent.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: Romanko on January 20, 2016, 10:14:42 AM
Thanks for your interest, currently miners not near me, will update with info on selected gear with photos and additional info next week.

Hey have a lot of that stuff))
1. 3 pics Prismas of 1,4TH, some with burned chips, not many useful part there)) BE controller ok works with two blades at 0.7 TH
2. XBET 3.2 TH miner works at 1,6TH and I think can be repaired.
3. R3 - 450GH - 3 pieces - miners are ok, but the controller doesnt power on.
4. Rockminer T1 - have 3 cubes at 2 TH ( 2 cubes work ok, and the third one from time to time)
5. KNC cubes - they hash as they want some 1/2, 1/4, -/-))
6. and of course KNC controllers that dont see the cubes - 4 pics. BB's are ok.


P.S. By the way if somebody has KNC neptune controller I might be interested!

PM Sent.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 24, 2016, 04:24:57 PM
Got some interesting offers.  Still looking!


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: generalt on January 24, 2016, 05:54:39 PM
I have a dead S5+ hash board if you're interested.  Heat sinks fell off and overheated some of the chips.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: jstew on January 24, 2016, 10:55:33 PM
its a long shot but i have an s2 with 7 out of 10 boards that were damaged in shipping , none of the boards are cracked in half or have breakes etc in them , what happened is some of the capacitors and resitors on the board got knocked off , they could actually be fixed with the right tools.

also have the backplane/controller/case for it  


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: jstew on January 24, 2016, 11:00:21 PM
http://i76.photobucket.com/albums/j39/lethalrides2k3/IMAG0471_zpsvuwzveea.jpg
http://i76.photobucket.com/albums/j39/lethalrides2k3/IMAG0473_zpseruf01yt.jpg
http://i76.photobucket.com/albums/j39/lethalrides2k3/IMAG0469_zpss3sk7g1c.jpg


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 24, 2016, 11:12:50 PM
I have a dead S5+ hash board if you're interested.  Heat sinks fell off and overheated some of the chips.

Can't really use any Antminer "parts" might want to look here:

https://bitcointalk.org/index.php?topic=1203190.0 (https://bitcointalk.org/index.php?topic=1203190.0)

If it where a whole machine, different story. ;)


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 24, 2016, 11:17:10 PM
its a long shot but i have an s2 with 7 out of 10 boards that were damaged in shipping , none of the boards are cracked in half or have breakes etc in them , what happened is some of the capacitors and resitors on the board got knocked off , they could actually be fixed with the right tools.

also have the backplane/controller/case for it  

Would not mind playing with an old S2.  Really wanted to order one back in 2014.  Shipping would most likely be too much.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: jstew on January 24, 2016, 11:20:00 PM
its a long shot but i have an s2 with 7 out of 10 boards that were damaged in shipping , none of the boards are cracked in half or have breakes etc in them , what happened is some of the capacitors and resitors on the board got knocked off , they could actually be fixed with the right tools.

also have the backplane/controller/case for it  

Would not mind playing with an old S2.  Really wanted to order one back in 2014.  Shipping would most likely be too much.

if just shipped as boards/backplane i dont think it would be that much to ship , could mount the backplane to a table or shelf and just put a fan infront of it to cool the cards

lol i have 11 working s2's that i dont even dare to try selling whole cause of the shipping cost, not a big deal they still turn a profit and when they dont anymore i have a bunch of 1000 and 1300w psus i can sell or reuse


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on January 28, 2016, 04:39:09 AM
Still on the lookout for dead/broken miners. :D


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: mindtrip on February 12, 2016, 12:30:41 PM
I still have some old / dead stuff if your still interested in any of it

4-5 Gridseed 5 Chip Globes
1 Antminer U3
1 Bitcrane T110S (1 Board is dead works at around 600GH)

Old Stuff that works
1 S2
1 S2 Missing a few boards
2 Rbox 110GH Units
1 Antminer U3 that works
10 Antminer U2 Sticks


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: QuentinA on February 12, 2016, 01:10:03 PM
Sorry to intrude like this, but I'd gladly take a monarch from OregonMines.com and why not the bitcrane unit from mindtrip :)

That is of course if you're not taking them :)

Also I know shipping will be pretty expensive to EU but do you guys have any idea?

Or any people located in EU have disfunctionnal HW to sell/give away?

Once again, helipotte is first to choose as he initiated the subject :)


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: mindtrip on February 12, 2016, 02:15:47 PM
Sorry to intrude like this, but I'd gladly take a monarch from OregonMines.com and why not the bitcrane unit from mindtrip :)

That is of course if you're not taking them :)

Also I know shipping will be pretty expensive to EU but do you guys have any idea?

Or any people located in EU have disfunctionnal HW to sell/give away?

Once again, helipotte is first to choose as he initiated the subject :)

I would sell but you would need to look into some sort of low cost shipping arangment to your country I am located in NY near NY City


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: QuentinA on February 12, 2016, 03:05:29 PM
Sorry to intrude like this, but I'd gladly take a monarch from OregonMines.com and why not the bitcrane unit from mindtrip :)

That is of course if you're not taking them :)

Also I know shipping will be pretty expensive to EU but do you guys have any idea?

Or any people located in EU have disfunctionnal HW to sell/give away?

Once again, helipotte is first to choose as he initiated the subject :)

I would sell but you would need to look into some sort of low cost shipping arangment to your country I am located in NY near NY City

Well that's the problem, it's 100usd for shipping 15kg by boat... So as long as you're not on the same continent it's not worth it (or for huge orders but not useable for outdated HW)


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: mindtrip on February 12, 2016, 04:21:32 PM
yeah sorry your best bet is to look for someone local to you selling old miners. I had someone come do local pick up for my last sale of old miners it saved him a lot on shipping


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: wlefever on February 12, 2016, 06:16:21 PM
I have a few "SOMETIMES" working R-Box 32-37 Gh/s miners and a Antminer U3 just sitting around bc I couldnt get it connected if you're interested.  

Holding on to a Avalon 4.1 that still runs at 950 Gh/s that I may part with if you wanted one. Just re read the thread and don't think this fits your criteria!


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on February 12, 2016, 06:44:21 PM
I have a few "SOMETIMES" working R-Box 32-37 Gh/s miners and a Antminer U3 just sitting around bc I couldnt get it connected if you're interested.  

Holding on to a Avalon 4.1 that still runs at 950 Gh/s that I may part with if you wanted one. Just re read the thread and don't think this fits your criteria!

I can't use the R-box stuff.  I actually would be interested in the Avalon.  PM of post here with what you are asking.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: sobe-it on February 12, 2016, 06:47:39 PM
I have a few "SOMETIMES" working R-Box 32-37 Gh/s miners and a Antminer U3 just sitting around bc I couldnt get it connected if you're interested.  

Holding on to a Avalon 4.1 that still runs at 950 Gh/s that I may part with if you wanted one. Just re read the thread and don't think this fits your criteria!

I can't use the R-box stuff.  I actually would be interested in the Avalon.  PM of post here with what you are asking.

Pm me on the rbox pods since hes not interested.


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: Indianacoin on February 12, 2016, 07:57:13 PM
I am wiling to sell 2 of my Antminer S3+, a PSU along with 1 Antminer U2 (for free).
For pictures you can look into my selling thread - https://bitcointalk.org/index.php?topic=1361455.0

But at least I can state that they are not dead.
They are fully functional. Just dont want them anymore.

Pm me if you are interested. :)


Title: Re: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM
Post by: helipotte on February 12, 2016, 08:07:04 PM
I am wiling to sell 2 of my Antminer S3+, a PSU along with 1 Antminer U2 (for free).
For pictures you can look into my selling thread - https://bitcointalk.org/index.php?topic=1361455.0

But at least I can state that they are not dead.
They are fully functional. Just dont want them anymore.

Pm me if you are interested. :)

Thanks for the offer, however I am looking for newer dead/broken hardware.