|
Title: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: kiwiasian on June 08, 2011, 02:19:12 PM Please show me a screenshot of this page:
https://i.imgur.com/TqJlx.jpg Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: theBaba on June 08, 2011, 03:05:38 PM Can't grab a screenshot right now, but I use "-v -w128 -f15"
My 6970 is clocked at 940MHz and in the Overdrive control panel I set power to +6% With these settings I get 398-402 Mhash/s. Without the +6% power, '-v' causes a performance decrease. Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: Sukrim on June 08, 2011, 03:22:47 PM Is there a reason you don't use BFI_INT?
Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: kiwiasian on June 08, 2011, 03:27:43 PM Can't grab a screenshot right now, but I use "-v -w128 -f15" My 6970 is clocked at 940MHz and in the Overdrive control panel I set power to +6% With these settings I get 398-402 Mhash/s. Without the +6% power, '-v' causes a performance decrease. What does it says next to "Device"? Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: kiwiasian on June 08, 2011, 03:28:02 PM Is there a reason you don't use BFI_INT? I thought it was directly integrated into the program? Edit: how do I use it? Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: Genrobo on June 08, 2011, 03:37:17 PM what kind of performance increase does BFI_INT really give?
Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: kiwiasian on June 08, 2011, 05:42:11 PM what kind of performance increase does BFI_INT really give? Also interested in knowing this...as far as I know I think it's just an optimization to improve performance on AMD cards. Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: rgod14 on June 08, 2011, 05:51:24 PM I used GUIMiner for quite awhile and decided to give Phoenix a try a couple days ago. I just recently posted it into https://en.bitcoin.it/wiki/Mining_hardware_comparison .
I am able to get 423 mh/s. Stales are a little higher but not too much more. Here are the settings I used if you're interested. ATI Tray Tools, Clocks=995/331.25, WORKSIZE=128 BFI_INT AGGRESSION=11 VECTORS ,68C @ 65% Fan, HAF932 Case One other thing to note. I can surf around on my pc and the hashing never drops below 410. With GUIMiner if I added -f0 I could get about 415 max and the pc was unusable. Don't mean to hijack just figured I'd let you know. Also, it's a Sapphire 2GB card in case that makes a difference. Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: kiwiasian on June 08, 2011, 06:02:28 PM I used GUIMiner for quite awhile and decided to give Phoenix a try a couple days ago. I just recently posted it into https://en.bitcoin.it/wiki/Mining_hardware_comparison . I am able to get 423 mh/s. Stales are a little higher but not too much more. Here are the settings I used if you're interested. ATI Tray Tools, Clocks=995/331.25, WORKSIZE=128 BFI_INT AGGRESSION=11 VECTORS ,68C @ 65% Fan, HAF932 Case One other thing to note. I can surf around on my pc and the hashing never drops below 410. With GUIMiner if I added -f0 I could get about 415 max and the pc was unusable. Don't mean to hijack just figured I'd let you know. Also, it's a Sapphire 2GB card in case that makes a difference. Can you just post a screenshot? Your GPU doesn't need to be mining, I just need a screenshot. Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: gogusrl on June 08, 2011, 06:11:58 PM You forgot to mention the most important part : the voltage of your GPU.
Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: bcpokey on June 08, 2011, 06:17:53 PM If you're wondering if your device should be labelled as Cypress, no, it should not. 69xx series are part of the Northern Islands architecture, I believe 6970s are caymans.
If you're wondering about device #, that varies by computer, device 0 happens often, sometimes device 1 happens. You don't really need to ask in such a cryptic way. Title: Re: If you own a single 6970 and you are using the GUI Miner please do me a favor Post by: kiwiasian on June 08, 2011, 10:09:24 PM If you're wondering if your device should be labelled as Cypress, no, it should not. 69xx series are part of the Northern Islands architecture, I believe 6970s are caymans. If you're wondering about device #, that varies by computer, device 0 happens often, sometimes device 1 happens. You don't really need to ask in such a cryptic way. So it should be something along the lines of: Device:
|
