|
Title: How to access the page config S3 luci by a public dns Post by: pailo on February 02, 2016, 05:05:12 AM Hi, I saw information about S3 antminer, I'm looking how to configure your computer to connect via a TCP / UDP port. But configure the firewall, and router with the same ports and addresses and ports remain blocked. If do you have any information for configuration for the firewall o network. Any suggestions accepted. Title: Re: How to access the page config S3 luci by a public dns Post by: notlist3d on February 02, 2016, 08:35:13 AM Hi, I saw information about S3 antminer, I'm looking how to configure your computer to connect via a TCP / UDP port. But configure the firewall, and router with the same ports and addresses and ports remain blocked. If do you have any information for configuration for the firewall o network. Any suggestions accepted. It would depend a lot on what firewall your using. Most I'm guessing are the ones included with router chances are as far as hardware. I'm not sure about " I'm looking how to configure your computer to connect via a TCP / UDP port. But configure the firewall, and router with the same ports and addresses and ports remain blocked" If you block something ... not sure how your getting through. You might look into things such as whiteistiing IP's if you know where your connecting from. But the most easy way to remotely connect I recommend for most is though teamviewer. |