|
Title: Bitmain Antminer S1, CONNECTION TIMED OUT!!! Post by: MrChic on February 03, 2016, 11:21:56 PM Hello,
Call me Nick I recently bought a used Bitmain Antminer S1. I am using a corsair CX500M power supply, plugged into a surge protector. I have Ethernet form S1 directly to my d-link router, IP address 192.168.0.1. When I try to connect to the IP address on the side: 192.168.1.99, it doesn't load, it says Connection timed out. If you need more specific directions, I can show pictures, and get more in depth. Thanks in advance, Nick Title: Re: Bitmain Antminer S1, CONNECTION TIMED OUT!!! Post by: philipma1957 on February 04, 2016, 04:50:15 AM Hello, dlink router isCall me Nick I recently bought a used Bitmain Antminer S1. I am using a corsair CX500M power supply, plugged into a surge protector. I have Ethernet form S1 directly to my d-link router. When I try to connect to the IP address on the side: 192.168.1.99, it doesn't load, it says Connection timed out. If you need more specific directions, I can show pictures, and get more in depth. Thanks in advance, Nick 192.168.0.1 the s1 starts with routers that have 1.1 ending you need to change the 1.99 ending on the s1 to something like 0.100 here is a you-tube video https://www.youtube.com/watch?v=akw9GAeIH5k Title: Re: Bitmain Antminer S1, CONNECTION TIMED OUT!!! Post by: MrChic on February 05, 2016, 02:10:57 AM How can I change my Antminer's address if I can't access it in the first place.
Sorry, this issue is bugging the **** out of me and I'm just annoyed. I appreciate any answer that helps me Thanks for your cooperation, Nick Title: Re: Bitmain Antminer S1, CONNECTION TIMED OUT!!! Post by: VirosaGITS on February 05, 2016, 11:17:33 AM How can I change my Antminer's address if I can't access it in the first place. Sorry, this issue is bugging the **** out of me and I'm just annoyed. I appreciate any answer that helps me Thanks for your cooperation, Nick Your computer need either manual routing setup or an 1.# address to access that subnet. If you don't really have a network setup yet, you could look into changing your router's subnet strait to 1.#. So instead your router's ip and your computer's ip would be 192.168.1.1 for the router and 192.168.1.# Otherwise networking is specifically designed so that you cannot access each other's network. Another option would be to get something like Win IP Config and temporarily add yourself a 1.# address but even though its simpler, its easy to get lost if you dont understand what you're doing. Title: Re: Bitmain Antminer S1, CONNECTION TIMED OUT!!! Post by: philipma1957 on February 05, 2016, 07:29:09 PM How can I change my Antminer's address if I can't access it in the first place. Sorry, this issue is bugging the **** out of me and I'm just annoyed. I appreciate any answer that helps me Thanks for your cooperation, Nick if you live near me in NJ I would do it for free. but there are a few short cuts for "dummies" (this is meant to be a friendly joke not mean) go to a friends has that has a router with an 192.168.1.1 not a 192.168.0.1 |