Title: Antminer U3 .bat code? Post by: jphelps on February 11, 2016, 03:59:17 AM Ive tried everyone i could find
cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982 cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306 even tried to just open cgminer, it keeps saying the pool difficulty changed or something please help Title: Re: Antminer U3 .bat code? Post by: notlist3d on February 11, 2016, 09:36:08 AM Ive tried everyone i could find cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982 cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306 even tried to just open cgminer, it keeps saying the pool difficulty changed or something please help If you look under devices is the U3 showing up? I ask this as it could be a driver issue zadig sometimes causes some people trouble. So I would start with looking for device. After that focus on cgminer. Long term get a R1 with crazy guy's mod on it. It will reset your zombies and make your life a lot easier.. Title: Re: Antminer U3 .bat code? Post by: jphelps on February 11, 2016, 12:03:16 PM Ive tried everyone i could find cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982 cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306 even tried to just open cgminer, it keeps saying the pool difficulty changed or something please help If you look under devices is the U3 showing up? I ask this as it could be a driver issue zadig sometimes causes some people trouble. So I would start with looking for device. After that focus on cgminer. Long term get a R1 with crazy guy's mod on it. It will reset your zombies and make your life a lot easier.. Title: Re: Antminer U3 .bat code? Post by: VirosaGITS on February 11, 2016, 08:14:20 PM Ive tried everyone i could find cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982 cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306 even tried to just open cgminer, it keeps saying the pool difficulty changed or something please help If you look under devices is the U3 showing up? I ask this as it could be a driver issue zadig sometimes causes some people trouble. So I would start with looking for device. After that focus on cgminer. Long term get a R1 with crazy guy's mod on it. It will reset your zombies and make your life a lot easier.. The Antminer R1. Its a router/miner/whatever. Someone put firmware on it that will prevent the U3 from going zombie; https://www.bitmaintech.com/productDetail.htm?pid=00020160128085902068wLN3nqWQ06C5 Title: Re: Antminer U3 .bat code? Post by: notlist3d on February 12, 2016, 11:24:25 PM Ive tried everyone i could find cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982 cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306 even tried to just open cgminer, it keeps saying the pool difficulty changed or something please help If you look under devices is the U3 showing up? I ask this as it could be a driver issue zadig sometimes causes some people trouble. So I would start with looking for device. After that focus on cgminer. Long term get a R1 with crazy guy's mod on it. It will reset your zombies and make your life a lot easier.. The Antminer R1. Its a router/miner/whatever. Someone put firmware on it that will prevent the U3 from going zombie; https://www.bitmaintech.com/productDetail.htm?pid=00020160128085902068wLN3nqWQ06C5 It's in the R1 thread on the forum. You will see different versions of Crazy Guy's custom firmware. But all of them are great, but you might go ahead and get most current. On the custom firmware it does not prevent zombies, but it does detect them and restart the device. It can go as far as restarting the entire R1 which does fix all zombies. It's a great firmware to run. Title: Re: Antminer U3 .bat code? Post by: Mikestang on February 13, 2016, 12:27:18 AM Follow steps to get proper driver and zadig, make sure your system sees the miner.
Download latest cgminer, 4.9.2: http://ck.kolivas.org/apps/cgminer/ Use U3 codes, e.g. --au3-freq <arg> Report back success or failure. |