|
Title: ANTMINER S7 BATCH 5 Post by: foncho86 on February 16, 2016, 03:03:09 AM Hello
I have this problem with my S7 Batch 5 hashing board.... What should I do..???? Please Help..!!!! Said 0 Temp and # 30 ASIC Chain Thanks https://i.imgur.com/Wjn27t1.jpg Title: Re: ANTMINER S7 BATCH 5 Post by: wikkidtt on February 16, 2016, 01:33:11 PM Well your out of warranty. There are three things you could do.....shut it down and try reconnecting all the connectors and checking to make sure it's not a bad psu causing the issue. Also swap the board connectors between board 1&2. If that doesn't help contact Bitmain and find out how much a board will cost you. Or do nothing and just let the board slowly die.
Title: Re: ANTMINER S7 BATCH 5 Post by: VirosaGITS on February 16, 2016, 07:02:56 PM Well your out of warranty. There are three things you could do.....shut it down and try reconnecting all the connectors and checking to make sure it's not a bad psu causing the issue. Also swap the board connectors between board 1&2. If that doesn't help contact Bitmain and find out how much a board will cost you. Or do nothing and just let the board slowly die. It look like its already dead since the miner is hashing at the speed of 2 boards, so i would unplug it and offer the dead board to sidehack or something. Of course do that after having verified that the board is really dead. Title: Re: ANTMINER S7 BATCH 5 Post by: OgNasty on February 16, 2016, 07:11:28 PM Same thing happened to me. I suspect you are not going to be happy with the outcome. Try restarting a few times and hope to get lucky, but it might be dead. Those o's will probably turn to x's soon. I found the miner worked faster with the cables disconnected, but you might want to leave it in there to keep the airflow the same, or send to someone who can fix it.
|
