Title: Antminer U3 - CGMiner - No Devices Detected Post by: ifauzi on February 17, 2016, 08:34:59 AM Please help, direction, & advice.
I have Antminer U3, now it no detected by cgminer. I am using windows 7. I have always reinstall zadig, it still not detect. No volt, no hashrate, it shown on cgminer reset stratum. if i unplug the usb, it still not power to develop hashrate. Any direction on bitcointalk have performed but it still not power to rise up the hashrate. I have tried on OSX (Macbook) using cgminer, it same too. can anyone give me advice? Posted From bitcointalk.org Android App Title: Re: Antminer U3 - CGMiner - No Devices Detected Post by: notlist3d on February 17, 2016, 05:23:50 PM Please help, direction, & advice. I have Antminer U3, now it no detected by cgminer. I am using windows 7. I have always reinstall zadig, it still not detect. No volt, no hashrate, it shown on cgminer reset stratum. if i unplug the usb, it still not power to develop hashrate. Any direction on bitcointalk have performed but it still not power to rise up the hashrate. I have tried on OSX (Macbook) using cgminer, it same too. can anyone give me advice? Posted From bitcointalk.org Android App I would not mess with OSX on it, just not a ton using U3's on it. In windows try installing Zadig again make sure it completes it. It is a pain in the butt for some. Others it works perfect. But the driver has a decent chance of being the problem. Long term I HIGHLY suggest you look into getting a R1 and install Crazy Guy's custom firmware. It will make your life easier on zombies, and it also is a low electricity usage controller. |