Title: Kanos Antminer Updates gone? Post by: gt_addict on March 14, 2016, 08:23:19 PM Hi everyone,
So ive got another S3+ arriving soon and would like to update it to Kanos wonderful update, but its not accessible through the github website. Does anyone have a different link or have it saved on there computer (stupid me I didn't save it :-\ ) so I can update my next S3? Thanks. Title: Re: Kanos Antminer Updates gone? Post by: toptek on March 16, 2016, 12:17:16 AM Hi everyone, So ive got another S3+ arriving soon and would like to update it to Kanos wonderful update, but its not accessible through the github website. Does anyone have a different link or have it saved on there computer (stupid me I didn't save it :-\ ) so I can update my next S3? Thanks. This works or just did for me :) i was able to download the tar to a pi. http://kano.is/AntS3/cgminer-ants3-4.9.2-94e04f6-3.tgz Code: cd / Title: Re: Kanos Antminer Updates gone? Post by: kano on March 16, 2016, 10:26:12 PM Oh, I guess someone didn't like that fact that I had binaries there for about 4 years :P
I've also put the git here: https://bitbucket.org/TheKano/cgminer-binaries/src Title: Re: Kanos Antminer Updates gone? Post by: gt_addict on March 17, 2016, 07:01:25 AM Fantastic thank you both. It should be arriving tomorrow so I'll get it updated asap ;D
Title: Re: Kanos Antminer Updates gone? Post by: gt_addict on March 18, 2016, 08:20:49 PM kano, ive flashed new bitmain firmware to my new (to me) s3+ in an attempt to bring the HW% down from 0.225% and I want to flash you update over the top but when I putty in it and type in the wget command line, it returns with "server returned error HTTP/1.1 404 not found".
Is this something ive done wrong or something to do with where the updates are stored? Thanks for you help in advance :) Edit:- I didn't put the capital "A & S" in AntS3. Blimey ssh can be a touchy mistress ::) :D Title: Re: Kanos Antminer Updates gone? Post by: kriptokyng on December 02, 2019, 04:47:10 AM I updated this to my current S3 and now my hash rates displayed in Awesome Miner are all over the place. I did a couple of reboots and no change. It would display 1.1+ THs and drop down to nothing. I am currently running on firmware antMiner_S320150109.bin. I am Solo Mining and was looking to try this out. Do I need down grade my firmware to a older version?
Thanks in Advance 3X Bitmain S3 Awesome Miner 7.1.1 1.33 THs Title: Re: Kanos Antminer Updates gone? Post by: philipma1957 on December 02, 2019, 05:10:42 AM I updated this to my current S3 and now my hash rates displayed in Awesome Miner are all over the place. this is a very old thread. it may be out of date. maybe kano will reply if it still works with awesome miner and the s-3 Title: Re: Kanos Antminer Updates gone? Post by: kriptokyng on December 02, 2019, 05:56:14 AM I tried -2 version and it did the same thing.
Title: Re: Kanos Antminer Updates gone? Post by: Biffa on December 02, 2019, 12:31:45 PM Forget awesome miner, what does it show on the miner interface, and what does it show on the pool?
Title: Re: Kanos Antminer Updates gone? Post by: kriptokyng on December 03, 2019, 12:09:13 AM It's bounce all over the place as well on the web interface. OK, let it run for about 6 Hours. Pretty happy with it. They settle down to the 480's. Yeah, Awesome Miner doesn't like something with this firmware. The average data is correct, but the 5 Second Report is all over the place. But Gonna Let them Eat Kripto01 - 4875.57 GHs Kripto02 - 500.31 GHs Kripto03 - 492.85 Ghs All Running at 40 C Degrees and Freq 250 MHz Thanks For the Help Guys Code: "hashrate1m": "1.52T", Title: Re: Kanos Antminer Updates gone? Post by: NotFuzzyWarm on December 03, 2019, 01:43:53 AM Sorta surprised Kano hasn't popped in here ;) One thing he'd probably mention to keep in mind is that the default polling rate that AM uses is something like 10 sec or so which is far far more than needed. Per his advice long ago I have AM set to poll my farms miners once every 240sec. (been ages since I changed it so don't remember the default). Increasing the polling interval will of course also smooth out AM's hash rate graph.
Using faster polling give ya more instantaneous snapshots but as you are seeing, it is the average rates that matters. There is a lot of diff bounce among the shares being sent and that translates into apparent instantaneous speed differences. Using AM I mainly only care about the shares being accepted. Most pools will adj miner diff to produce an average of 18 shares/minute so setting a trigger for no shares accepted over say 3 min or more is prudent. Title: Re: Kanos Antminer Updates gone? Post by: kriptokyng on December 05, 2019, 05:59:30 PM Yeah, still pretty happy with the numbers.
3 BitMain S3 #3 is the Big Worker Average 488.34 Freq 250 Best 2,711,823,571 #1 Average 477.03 Freq 237 Best 16,426,915 #2 Average 483.23 Freq 237 Best 13,765,322 Wish I could get the other 2 to the 250 Freq without dropping a chip. Code: { Title: Re: Kanos Antminer Updates gone? Post by: kano on December 05, 2019, 11:35:07 PM ... Should be true of every miner on the planet.The average data is correct, but the 5 Second Report is all over the place. ... The variance on 5 Seconds should be high. The 'average' takes time to level out, probably an hour or two. As I've mentioned before somewhere ... I once had something like a 1 hour runtime on an S3 average around 150% performance due to variance. Shares are statistical results, so expecting them to provide short term consistent averages is simply misunderstanding what a miner is doing (or fudging the data) |