|
Title: How to tell the batch number of the miner? Post by: wmabern on March 18, 2016, 06:08:13 AM I have two Bitminer S7's bought a few weeks apart. I think the second one is a batch 10. But not sure.
How can I figure out the batch number of the miners either through the web or by physical inspection of the machine? Thanks!! :) Title: Re: How to tell the batch number of the miner? Post by: VirosaGITS on March 18, 2016, 11:25:52 AM I have two Bitminer S7's bought a few weeks apart. I think the second one is a batch 10. But not sure. How can I figure out the batch number of the miners either through the web or by physical inspection of the machine? Thanks!! :) Check the S/N sticker. I can't check my S7 atm but iirc there was a small sticker saying the version of the miner and possibly what batch in really small print. Title: Re: How to tell the batch number of the miner? Post by: Legacy2005 on March 18, 2016, 03:17:21 PM generally the best you can get is a batch range. the earlier batchs had different hash rates where as anything from 8+ is all 4.73.
on top of the miner it will show the hash rate. match that to the chart below. https://www.bitmaintech.com/bm_tech_admin_at_123/userfiles/image/F&H.jpg Title: Re: How to tell the batch number of the miner? Post by: philipma1957 on March 18, 2016, 03:38:00 PM the gui shows every asic
the older 1-7 have 162 asics the newer 8-13 have 145 asics below is a batch 1 note the asics are show in 0 and there are 162 of them https://i.imgur.com/eN3QQ3g.png Title: Re: How to tell the batch number of the miner? Post by: Finksy on March 18, 2016, 04:47:15 PM Batch 1 S7's w/ 162 chips and 4.86 have V1.X listed on them. Batch 5 and later 162-chip units have V2.0 on them. I didn't have any units in between these so I can't comment on them.
Title: Re: How to tell the batch number of the miner? Post by: wmabern on March 18, 2016, 06:22:51 PM Thank you for the replies.
Both of my S7's came with 45 chips per and average 4,724.03 GH. It came set as 700Mghz. I will get out my flashlight and see if I can find any kind of sticker. Thanks All! Title: Re: How to tell the batch number of the miner? Post by: Legacy2005 on March 18, 2016, 08:00:09 PM shouldn't need a flashlight the sticker is right on the top of the unit.
sticker on top of unit: http://i.ebayimg.com/images/g/3hoAAOSwMORW61nx/s-l500.jpg Title: Re: How to tell the batch number of the miner? Post by: wmabern on March 18, 2016, 08:13:29 PM I checked out the stickers. Both of the S7's say:
Submodel- S7_4.73 The other sticker says version 1.34. There is other info on the stickers such as serial #'s, etc., but nothing about batch. There is also a green sticker on the circuit board that says: QC Passed 10. Just wanted to know the batch number for if/when I try to sell them. Anyway, thanks for the assistance! Title: Re: How to tell the batch number of the miner? Post by: philipma1957 on March 18, 2016, 09:30:34 PM I checked out the stickers. Both of the S7's say: Submodel- S7_4.73 The other sticker says version 1.34. There is other info on the stickers such as serial #'s, etc., but nothing about batch. There is also a green sticker on the circuit board that says: QC Passed 10. Just wanted to know the batch number for if/when I try to sell them. Anyway, thanks for the assistance! it is a batch 8-13. not much difference in them. I would think it is an 8-12 since the 13 has yet to ship. As a buyer with decent knowledge if it is 8 to 12 or 8 to 13 I would consider it to be enough info . when they are batch 1 to 7 I really want to know if they are a batch 2 or a batch 3 I would not want a batch 1. but the 2 and 3 batches I worked with were all monster good machine my batch 2 gave me .235 watts a gh at freq 575 and using a titanium psu. Title: Re: How to tell the batch number of the miner? Post by: wmabern on March 18, 2016, 11:08:58 PM Thanks! :)
Title: Re: How to tell the batch number of the miner? Post by: Biodom on March 19, 2016, 05:24:24 AM I checked out the stickers. Both of the S7's say: Submodel- S7_4.73 The other sticker says version 1.34. There is other info on the stickers such as serial #'s, etc., but nothing about batch. There is also a green sticker on the circuit board that says: QC Passed 10. Just wanted to know the batch number for if/when I try to sell them. Anyway, thanks for the assistance! it is a batch 8-13. not much difference in them. I would think it is an 8-12 since the 13 has yet to ship. As a buyer with decent knowledge if it is 8 to 12 or 8 to 13 I would consider it to be enough info . when they are batch 1 to 7 I really want to know if they are a batch 2 or a batch 3 I would not want a batch 1. but the 2 and 3 batches I worked with were all monster good machine my batch 2 gave me .235 watts a gh at freq 575 and using a titanium psu. my experience differs...b1 very stable at 600, ~4.78Th/s, b2 can do only 575 at 4.66 th, nothing more. b5 and b7 are great. b4 and b6-nothing special, but stable. Title: Re: How to tell the batch number of the miner? Post by: philipma1957 on March 21, 2016, 04:28:22 AM I checked out the stickers. Both of the S7's say: Submodel- S7_4.73 The other sticker says version 1.34. There is other info on the stickers such as serial #'s, etc., but nothing about batch. There is also a green sticker on the circuit board that says: QC Passed 10. Just wanted to know the batch number for if/when I try to sell them. Anyway, thanks for the assistance! it is a batch 8-13. not much difference in them. I would think it is an 8-12 since the 13 has yet to ship. As a buyer with decent knowledge if it is 8 to 12 or 8 to 13 I would consider it to be enough info . when they are batch 1 to 7 I really want to know if they are a batch 2 or a batch 3 I would not want a batch 1. but the 2 and 3 batches I worked with were all monster good machine my batch 2 gave me .235 watts a gh at freq 575 and using a titanium psu. my experience differs...b1 very stable at 600, ~4.78Th/s, b2 can do only 575 at 4.66 th, nothing more. b5 and b7 are great. b4 and b6-nothing special, but stable. Yeah it is funny that way on the older batches my batch 2 can clock to 5125 gh with 0.0001 % errors My batch 1 was 4600 on a good day with errors at 0.3000 Title: Re: How to tell the batch number of the miner? Post by: mavericklm on March 21, 2016, 04:59:34 AM Your batch 1 was a dud, mine was in specs ;)
actually all my s7 were within the specs of its own batch Title: Re: How to tell the batch number of the miner? Post by: Finksy on March 21, 2016, 09:22:13 PM My one Batch 1 hashes pretty well at 4.9T and 0.03% HW.
The other one hasn't put out too many shares since December: http://i66.tinypic.com/10rttom.jpg http://i67.tinypic.com/jkhf9l.jpg Title: Re: How to tell the batch number of the miner? Post by: Legacy2005 on March 22, 2016, 06:11:31 PM wow..looks like a small fire.
were you able to tell the source of the fire? Title: Re: How to tell the batch number of the miner? Post by: Finksy on March 22, 2016, 06:14:13 PM wow..looks like a small fire. were you able to tell the source of the fire? Came from within. Boards shorted... Not PSU related, as there were 2 other S7's on the same DPS-4K PSU setup, and they were still mining away before and after this. Title: Re: How to tell the batch number of the miner? Post by: notabeliever on March 24, 2016, 02:48:14 AM wow..looks like a small fire. were you able to tell the source of the fire? Came from within. Boards shorted... Not PSU related, as there were 2 other S7's on the same DPS-4K PSU setup, and they were still mining away before and after this. |
