|
Title: [WTS] 2x KNC Neptune w/ PSU's Post by: Finksy on March 22, 2016, 06:08:58 PM Located in Ontario, Canada. 2x full KNC Neptunes with 2x controllers. These are compensation batch Neptunes, I typically run them at 1.5-1.8 TH each. They are very finnicky, especially in warm ambient temps and need to be restarted often.
Open to offers, will price out shipping if you give me zip/postal code. Can include a 2880W PSU setup that I used to power them with 15awg cables (will need an ATX PSU to power controllers) for $160. Do not have the PCIe y-splitter cables anymore. Title: Re: [WTS] 2x KNC Neptune w/ PSU's Post by: adaseb on March 22, 2016, 10:46:44 PM When you run them at 1.8Th/s how much power do they consume?
Title: Re: [WTS] 2x KNC Neptune w/ PSU's Post by: jstew on March 23, 2016, 06:58:43 AM pm sent
Title: Re: [WTS] 2x KNC Neptune w/ PSU's Post by: Finksy on March 24, 2016, 06:35:11 PM When you run them at 1.8Th/s how much power do they consume? They don't stabilize very well even at 1.8 where I have them set-up (too warm, these were missing heatsinks on VRM or something around those lines). Power consumption is around 0.45-0.5W/GHs at current voltage/frequency. 2 of the cubes aren't even hashing right now. Title: Re: [WTS] 2x KNC Neptune w/ PSU's Post by: adaseb on March 24, 2016, 07:36:03 PM I heard there is a plastic cover between the chip and the heatsink that KNC forgot to remove during assembly, maybe you need to take that part out.
|