Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: ep1989 on April 13, 2016, 01:05:09 AM



Title: mining problem on eth
Post by: ep1989 on April 13, 2016, 01:05:09 AM
hello guys i would ask for some help because i have 3 computer mining actuel 2 with 1 R9 380X and one rig with 5 r9 380X all the card was buy the same day. on the first computer i get 19 Mh/s and my computer is perfectly sync to the pool (i get all my eth mined )  .On the 2nd computer with only one card mine at 13mh/s and i cannot show my worker as active on my worker setting . on my rig with 5 card the miner is too showed as not active  and by the way i cannot get my coins . My question is simple why i have this problem with a runme.bat copy paste on all these 3 computer ?? ?
P.S English is not my main language i know i don't writte perfeclty try to be nice and don't blame me for my english .


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 01:13:31 AM
hello guys i would ask for some help because i have 3 computer mining actuel 2 with 1 R9 380X and one rig with 5 r9 380X all the card was buy the same day. on the first computer i get 19 Mh/s and my computer is perfectly sync to the pool (i get all my eth mined )  .On the 2nd computer with only one card mine at 13mh/s and i cannot show my worker as active on my worker setting . on my rig with 5 card the miner is too showed as not active  and by the way i cannot get my coins . My question is simple why i have this problem with a runme.bat copy paste on all these 3 computer ?? ?
P.S English is not my main language i know i don't writte perfeclty try to be nice and don't blame me for my english .

You need to be in alt coin section.


Okay shut it off you are wasting money.

pc 1 = no miners

pc 2 = 1 miner all good

pc 3 = 5 miners wrong.  

what is the pc 3 mother board?

do you have any important stuff on that pc?


what is the amd driver   I use 15.12

http://www.guru3d.com/files-details/amd-radeon-software-crimson-15-12-driver-download.html


what pool do you use?

I use  here is my pool


 http://nanopool.org


also do you have msi afterburner loaded?



https://gaming.msi.com/features/afterburner   this lets you look at every single gpu on the pc.


I think you have two things wrong on the 5 card pc 


 the wrong driver  and

 a  bad bat file


I hope this gear is for mining only.

 I had your problem and I did a full load of my windows 7
my moboboard  drivers

amd 15.12

and msi afterburner

then I loaded my software and name the work different like this:

so one pc has the worker name:

 hd7970

the other pc has worker name:

hd7970A






https://i.imgur.com/zDnzGwr.png



Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 02:10:02 AM
pc 1= miners okey
pc 2= no miners
pc3 = no miners

pc 1 had H81m-plus
pc 2 had H81m-DGS
pc 3 had m5A99FX pro R2.0
 

I use on all computer crimson 16.4.1

i use windows 7 64 bits

i mine on eth supernova pool :link here https://eth.suprnova.cc/

and my bat file is ethminer -G -F http://eth-mine.suprnova.cc:3000/ephx.1/a

i have build 3 worker ephx.1 ephx.2 and ephx.3 i have try all worker on each computer

i don't use any soft to check the temp because actuel the problem is not a shut down of the services is more about i mine for nothing because i can see my speed i can see my hashrate but only on console not in pool so my coin never come to my account (logical )


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 02:22:16 AM
pc 1= miners okey
pc 2= no miners
pc3 = no miners

pc 1 had H81m-plus
pc 2 had H81m-DGS
pc 3 had m5A99FX pro R2.0
 

I use on all computer crimson 16.4.1

i use windows 7 64 bits

i mine on eth supernova pool :link here https://eth.suprnova.cc/

and my bat file is ethminer -G -F http://eth-mine.suprnova.cc:3000/ephx.1/a

i have build 3 worker ephx.1 ephx.2 and ephx.3 i have try all worker on each computer

i don't use any soft to check the temp because actuel the problem is not a shut down of the services is more about i mine for nothing because i can see my speed i can see my hashrate but only on console not in pool so my coin never come to my account (logical )


Give me five minutes .

take one of the bad pc's

use this as a bat file

ethminer -G -F http://us-east1.nanopool.org:8888/0x3ef297e47404a771139472b93621f82c8a832857/test


It should show here in a few minutes

 http://nanopool.org/account/0x3ef297e47404a771139472b93621f82c8a832857


1   hd7970   few minutes ago   61.6 Mh/s   32.0 Mh/s   33.6 Mh/s
2   hd7970a   8 minutes ago   26.4 Mh/s   24.2 Mh/s   20.0 Mh/s
3   hd7750     this one is turned off

4     test   it will be mining for   my account  Not looking to take money


if it shows write a new bat file

ethminer -G -F http://us-east1.nanopool.org:8888/   use your number not mine   0x3ef297e47404a771139472b93621f82c8a832857   /test/ use your email



pick one of the pc's that was not working right.


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 02:39:18 AM
http://[url=http://www.hostingpics.net/viewer.php?id=455070screen.jpg][img]http://img15.hostingpics.net/thumbs/mini_455070screen.jpg[/url][/img] check my scrreen i've lauched it (if my screen work )

http://hpics.li/b533198


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 02:43:33 AM
http://[url=http://www.hostingpics.net/viewer.php?id=455070screen.jpg][/url] check my scrreen i've lauched it (if my screen work )

http://hpics.li/b533198


you are new so here is img

http://img15.hostingpics.net/thumbs/mini_455070screen.jpg


looks like you paused it  >

 I would rather you ran it  so I would see it really go to my account  for  a  few minutes. Maybe a grand total of 0.0001 ETH coin

 But it does look like it took.  So do a new batch file  with your account not mine  and then let me know if it took  it take 5 to 10 minutes to show on this link

http://nanopool.org/account/    use your  eth number   not mine to look up your stats       0x3ef297e47404a771139472b93621f82c8a832857#


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 02:44:39 AM
yes im new and haven't used yet img insertion on forum i don't post many img :D


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 02:50:38 AM
yes im new and haven't used yet img insertion on forum i don't post many img :D

so I think it worked.

so do a batch  file  with

                    ethminer -G -F http://us-east1.nanopool.org:8888/your     number / test/and your email


then check the stats in ten minutes or so.


let me know if you got it working.



if it does then  use the other pc with this bat. file


                    ethminer -G -F http://us-east1.nanopool.org:8888/your     number/test2/and your email



so 1 pc will keep the old pool

2 pc will have new pool          test
3 pc will have new pool          test2

and if it crashes they will send an email to you

good luck


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 02:54:06 AM
nop still not working i did one with my adresse and its not working either look im working atm and their is no share 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 this is my account info on nanopool look here http://hpics.li/f97e19a


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 02:57:11 AM
nop still not working i did one with my adresse and its not working either look im working atm and their is no share 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 this is my account info on nanopool look here http://hpics.li/f97e19a

stop  pause    <  no pause            in the batch file



you have to run it 10 to 15 minutes and it will show


no pause let it run  for a while see below

https://i.imgur.com/WXrLGIB.png


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 03:05:24 AM
okey i have remove it and i will let him work for 10/15 min and tell you back what's happend in 15/20 min


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 03:15:20 AM
your photo has a column

it is 48xxxxx to 51xxxxx   you are doing   48 to 51 mh  it will show up


https://i.imgur.com/090hKxM.png





see the minor running and the column with 29- 34xxxxxxx

https://i.imgur.com/zhzI6Hq.jpg

same miner a minute different    column with  29-34xxxxxxx


https://i.imgur.com/MGoFSQv.jpg


and the web site has  a miner with 30- 33mh  
https://i.imgur.com/4fH79FL.png


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 03:20:53 AM
yes i understand what you mean and i see the same column and i know its about hashrate but after 15min  if you check my adress 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 i still have'nt done any share if we look at the pool stats even my console saying i did . Its like im not connected to the pool


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 03:27:39 AM
yes i understand what you mean and i see the same column and i know its about hashrate but after 15min  if you check my adress 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 i still have'nt done any share if we look at the pool stats even my console saying i did . Its like im not connected to the pool

be patience   first connection is slow


are your still showing the 47 -51 mhs number ?


if so you are connected.


what country are you in?


Europe

ethminer -G-F http://eu1.nanopool.org:8888
ethminer -G-F http://eu2.nanopool.org:8888


USA Canada

    us-east1.nanopool.org:8888
    us-west1.nanopool.org:8888


    asia1.nanopool.org:8888


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 03:31:13 AM
im from france

and yes 47 54 on 4 card rig doesn't know why my 5th card doesn't work yet but i  will fixe it really really soon anyway maybe can u said me why i get 19 mh/s with my 1st computer with only one card and around 13 m/hs pet card on 2nd pc and on the rig with 4 card ( 51/4= 12.75) all mining comparated show r9 380X at 20 mh/s why did i mine so slow ??

i have change to the eu1


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 03:35:55 AM
im from france

and yes 47 54 on 4 card rig doesn't know why my 5th card doesn't work yet but i  will fixe it really really soon anyway maybe can u said me why i get 19 mh/s with my 1st computer with only one card and around 13 m/hs pet card on 2nd pc and on the rig with 4 card ( 51/4= 12.75) all mining comparated show r9 380X at 20 mh/s why did i mine so slow ??



I am sorry but I need to go to work tomorrow so I have to sleep.

I will try to figure out more tomorrow.


r9 380  gear should do 18 to 22 each

  so 4 = 72 to 88

do not know answer right now.  Let me sleep on it.


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 03:37:36 AM
okey thanks for the time you did spend to help me and have a good night


Title: Re: mining problem on eth
Post by: Unacceptable on April 13, 2016, 03:52:35 AM
My 380 does as high as 22mhs,average is 19+mhs  ;)

I don't have any multi GPU rigs so I can't help with that  :(

I do know crimson 16.4.1 is not good,it gives a lower hash rate,my Sapphire 380 4gig likes 15.15.1004 on Win7 64bit,why ?? I have no idea,it just does  :D

http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-300-Series.aspx#

Go to this section:
The AMD Catalyst™ Driver for AMD Radeon™ 300 Series products can be downloaded from the following link:


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 05:48:21 AM
ty for reply i hae tried it 5 times and catalyst detect my card as vga standard (so card not detected and can't mine ) so i pull back to 16.3.2. I have try all drivers atm no one fix my problem sadly :s:ss:s


Title: Re: mining problem on eth
Post by: Unacceptable on April 13, 2016, 06:05:49 AM
Try looking thru this other forum,I found alot of good info there  ;)

https://forum.ethereum.org/categories/mining

BTW,I use driver sweeper to clear my registry when I change vid drivers,just be sure NOT to check any boxes for chipset & other necessary things,just the vid drivers.

http://www.guru3d.com/content_page/guru3d_driver_sweeper.html


Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 04:29:42 PM
guys someone with many miners on same router can tell me if i need to make changes on router upnp (a friend told me if i can sync to the pool with my other miners is because the pool ping on same port and they cannot be all connected on same port ) is that true ?


Title: Re: mining problem on eth
Post by: philipma1957 on April 13, 2016, 06:23:34 PM
guys someone with many miners on same router can tell me if i need to make changes on router upnp (a friend told me if i can sync to the pool with my other miners is because the pool ping on same port and they cannot be all connected on same port ) is that true ?


You need a Euro guy from France  to answer. 

You are using a French internet service.  So I don not know much about their setup what they let pass do they bump you or do not bump you.

I use cablevision's optimum online service.

They would shut me down every 4 to 6 days if I ran a bitcoin node.

But they would allow many miners to connect for  weeks on end no issues.

I have had up to nine miners connect to kano.is pool  but not more as I would be bumped at nine.

You only have three machines you should be able to hook them up.



Title: Re: mining problem on eth
Post by: ep1989 on April 13, 2016, 10:49:51 PM
hey i just solved at the moment my problem all my problems come about this fking AMD drivers i have try a lot of old driver and i found the 15.11.1 nad its the best one i had my hashrate speed corrected and pool found my shares thank you for the time you spend to help me


Title: Re: mining problem on eth
Post by: philipma1957 on April 14, 2016, 12:50:32 PM
hey i just solved at the moment my problem all my problems come about this fking AMD drivers i have try a lot of old driver and i found the 15.11.1 nad its the best one i had my hashrate speed corrected and pool found my shares thank you for the time you spend to help me

Good I just did an Amd driver install an hour ago.

Amd driver corruption issues are very common.