Title: Antminer S7 Batch 6 correct firmware Post by: Zacudis on April 24, 2016, 05:07:42 AM Hi I have a S7 batch 6 and its giving me a lot of grief every thing works like it should but then it starts mining oddly, ie random, no hardware errors .02% have power monitors on them so its not power, I was wondering if the firmware might need to be updated and what exactly is the correct firmware? I want to be sure before i do anything. in the bitmain site there are several updates but which is for the batch 6. I have put new fans on, the voltage, and oc is stock. checked every thing? any ideas. thanks Title: Re: Antminer S7 Batch 6 correct firmware Post by: MyRig on April 26, 2016, 05:58:08 AM batch 6 would be 4.05TH/s model and the newest firmware is this
https://bitmaintech.com/files/download/SD-S7-20151211-600.tar.gz Before apply the firmware update, please go to these pages and take screenshots for the notes. So if something goes wrong, you know what value to put it back -Miner Status Page (Pool info, Chip count and Frequency info) -Network (DHCP or STATIC IP you use) Hi I have a S7 batch 6 and its giving me a lot of grief every thing works like it should but then it starts mining oddly, ie random, no hardware errors .02% have power monitors on them so its not power, I was wondering if the firmware might need to be updated and what exactly is the correct firmware? I want to be sure before i do anything. in the bitmain site there are several updates but which is for the batch 6. I have put new fans on, the voltage, and oc is stock. checked every thing? any ideas. thanks Title: Re: Antminer S7 Batch 6 correct firmware Post by: Zacudis on April 27, 2016, 10:23:59 PM batch 6 would be 4.05TH/s model and the newest firmware is this https://bitmaintech.com/files/download/SD-S7-20151211-600.tar.gz Before apply the firmware update, please go to these pages and take screenshots for the notes. So if something goes wrong, you know what value to put it back -Miner Status Page (Pool info, Chip count and Frequency info) -Network (DHCP or STATIC IP you use) Hi I have a S7 batch 6 and its giving me a lot of grief every thing works like it should but then it starts mining oddly, ie random, no hardware errors .02% have power monitors on them so its not power, I was wondering if the firmware might need to be updated and what exactly is the correct firmware? I want to be sure before i do anything. in the bitmain site there are several updates but which is for the batch 6. I have put new fans on, the voltage, and oc is stock. checked every thing? any ideas. thanks Ahhh great, thank you for your help, I have not had to update the firmware but it seems this one I have no choice, Is there anything else I need to watch for, I have read alot of people having trouble updating the S7. I have not had any trouble updating the firmware on the S3, or the S5's Title: Re: Antminer S7 Batch 6 correct firmware Post by: PassThePopcorn on April 28, 2016, 05:24:27 PM batch 6 would be 4.05TH/s model and the newest firmware is this https://bitmaintech.com/files/download/SD-S7-20151211-600.tar.gz Before apply the firmware update, please go to these pages and take screenshots for the notes. So if something goes wrong, you know what value to put it back -Miner Status Page (Pool info, Chip count and Frequency info) -Network (DHCP or STATIC IP you use) Hi I have a S7 batch 6 and its giving me a lot of grief every thing works like it should but then it starts mining oddly, ie random, no hardware errors .02% have power monitors on them so its not power, I was wondering if the firmware might need to be updated and what exactly is the correct firmware? I want to be sure before i do anything. in the bitmain site there are several updates but which is for the batch 6. I have put new fans on, the voltage, and oc is stock. checked every thing? any ideas. thanks Ahhh great, thank you for your help, I have not had to update the firmware but it seems this one I have no choice, Is there anything else I need to watch for, I have read alot of people having trouble updating the S7. I have not had any trouble updating the firmware on the S3, or the S5's Title: Re: Antminer S7 Batch 6 correct firmware Post by: Zacudis on May 02, 2016, 02:33:31 AM I managed to get everything up and running with out any problem, the firmware link in the post is good, this is the one that i flashed. So i will be locking this thread. if any one should need some help, and I can, if not i can point you in the right direction, please do not hesitate to pm me. Thank you all for your help.
|