|
Title: Looking for ANTMINER S7 6" to 4" Adapter fan duct heating cooling Post by: cabal2000 on May 02, 2016, 09:32:44 PM Looking for this
http://www.ebay.ca/itm/ANTMINER-S7-6-to-4-Adapter-fan-duct-heating-cooling/162015404197 Not going to the very hefty price but its a great idea. Anyone know where I can get my hands on 6 or 12 of these? Title: Re: Looking for ANTMINER S7 6" to 4" Adapter fan duct heating cooling Post by: philipma1957 on May 03, 2016, 02:57:44 AM Looking for this http://www.ebay.ca/itm/ANTMINER-S7-6-to-4-Adapter-fan-duct-heating-cooling/162015404197 Not going to the very hefty price but its a great idea. Anyone know where I can get my hands on 6 or 12 of these? Watch for overheating. The reduction in size restricts air speed. Look into flex vent from Home Depot use bigger like 12 inch put the whole miner in it. Just about 1 foot inside on intake put a small hole in the vent to allow your pcie cables . Then make the exhaust side as long as you want . Just go to Home Depot and search for flex duct 12 inches or 10 inches. Title: Re: Looking for ANTMINER S7 6" to 4" Adapter fan duct heating cooling Post by: dogie on May 03, 2016, 05:29:16 AM Just go to Home Depot and search for flex duct 12 inches or 10 inches. He wants something that screws into the fan/mount. You could probably repurpose one of these, in the worst case cutting them in half to get 2x and then using tape to join the duct to duct ends. http://www.frozencpu.com/products/16138/duc-55/Akust_Extendable_Air_Flow_Thermal_Hood_-_70_80_92_120_Fans_-_Black_FG02-0100-AKS.html?tl=g54c505s1965 http://www.frozencpu.com/products/18219/duc-61/Akust_Extendable_Air_Flow_Thermal_Hood_-_120_140_Fans_-_Black_FG02-0102-AKS.html?tl=g54c505s1965 Title: Re: Looking for ANTMINER S7 6" to 4" Adapter fan duct heating cooling Post by: philipma1957 on May 03, 2016, 02:15:38 PM Just go to Home Depot and search for flex duct 12 inches or 10 inches. He wants something that screws into the fan/mount. You could probably repurpose one of these, in the worst case cutting them in half to get 2x and then using tape to join the duct to duct ends. http://www.frozencpu.com/products/16138/duc-55/Akust_Extendable_Air_Flow_Thermal_Hood_-_70_80_92_120_Fans_-_Black_FG02-0100-AKS.html?tl=g54c505s1965 http://www.frozencpu.com/products/18219/duc-61/Akust_Extendable_Air_Flow_Thermal_Hood_-_120_140_Fans_-_Black_FG02-0102-AKS.html?tl=g54c505s1965 I had some made up on a 3d printer. They raised temps 3 to 6 c. So I do not like them. Title: Re: Looking for ANTMINER S7 6" to 4" Adapter fan duct heating cooling Post by: smaxz on May 04, 2016, 01:29:15 PM yeah but you could always drop some ducting down from a ventilation fan that is pulling upwards of 150cfm and split to multiple miners to draw away the heat.. ambient would benefit and the result would be a push/pull for the S7F1 at minimal cost.
thanks for the link Title: Re: Looking for ANTMINER S7 6" to 4" Adapter fan duct heating cooling Post by: xxcsu on May 05, 2016, 07:01:04 PM Im using this one from ebay on two S7 :
http://www.ebay.com/itm/201527240893 Did not noticed any temp change , ambient temp is around 20-22C , fan speed set to 55% , miner temp 58/55/58 another one from different bach is 64/58/63 Title: Re: Looking for ANTMINER S7 6" to 4" Adapter fan duct heating cooling Post by: philipma1957 on May 05, 2016, 10:45:14 PM Im using this one from ebay on two S7 : http://www.ebay.com/itm/201527240893 Did not noticed any temp change , ambient temp is around 20-22C , fan speed set to 55% , miner temp 58/55/58 another one from different bach is 64/58/63 your ambient is a lot lower ( I am 27-31) which may be why you are good. My miners are 62/61/63 with fans at 3000 rpm |