Bitcoin Forum

Bitcoin => Mining support => Topic started by: jagc1994 on May 26, 2016, 05:37:43 AM



Title: SP35 Stop Running
Post by: jagc1994 on May 26, 2016, 05:37:43 AM
Hi, I am having a problem with my SP35. It hashes at good speed but it continuously stop running for a few seconds and then starts again. That is why it isnīt mining what it should. Once it gets started again, It reach the 5.5 TH. What could be happening?




Title: Re: SP35 Stop Running
Post by: Baby Rage on May 26, 2016, 08:38:51 AM
First step with miners, check the PSU. I know my GAW miners kept rebooting. so i swapped out the PSU and it was fine.


Title: Re: SP35 Stop Running
Post by: jagc1994 on May 26, 2016, 11:32:11 PM
First step with miners, check the PSU. I know my GAW miners kept rebooting. so i swapped out the PSU and it was fine.

Already did that and keeps stopping.

Thanks for your comment anyways.

Donīt know what else could I do.


Title: Re: SP35 Stop Running
Post by: notlist3d on May 27, 2016, 05:02:35 AM
First step with miners, check the PSU. I know my GAW miners kept rebooting. so i swapped out the PSU and it was fine.

Already did that and keeps stopping.

Thanks for your comment anyways.

Donīt know what else could I do.

Is it a miner that worked fine or is it new to you and always done this?  What is your electrical setup like going to the SP35 do you have 220/240?

I would agree looking at PSU first, and power second.


Title: Re: SP35 Stop Running
Post by: jagc1994 on May 27, 2016, 05:23:44 AM
First step with miners, check the PSU. I know my GAW miners kept rebooting. so i swapped out the PSU and it was fine.

Already did that and keeps stopping.

Thanks for your comment anyways.

Donīt know what else could I do.

Is it a miner that worked fine or is it new to you and always done this?  What is your electrical setup like going to the SP35 do you have 220/240?

I would agree looking at PSU first, and power second.

It is new for me and since I plugged in, it have been stopping every time. I have 220V and the Socket Voltage of the miner is 208/208 volt. Already switched the PSU and nothing changed.

http://ia601507.us.archive.org/25/items/SpondooliesStatus1/Spondoolies%20status%202.png


Title: Re: SP35 Stop Running
Post by: fanatic26 on May 27, 2016, 06:33:16 PM
Its not showing any temperatures. I am not familar with the SP35 but maybe its not hashing because its trying to protect itself from overheating?