|
Title: Web Interface Access on S3 Wifi? Post by: 813bits on May 30, 2016, 02:11:00 PM I successfully added the wifi mod to one of my S3's and have it mining on the WWAN (wifi) interface with a static ip. It is mining good but it does not allow me to access it through the web interface or ping. If I plug in the ethernet cable and both WAN (x.x.x.90) and WWAN (x.x.x.80) interfaces are active, I can access the WWAN interface through the web interface.
Has anyone successfully been able to access the web interface with just having the WWAN interface active? Thanks. Title: Re: Web Interface Access on S3 Wifi? Post by: gt_addict on May 30, 2016, 02:33:15 PM Use an IP scanner to find it and then it should give you a web icon to double click and get into it that way.
Title: Re: Web Interface Access on S3 Wifi? Post by: 813bits on May 30, 2016, 02:39:38 PM Use an IP scanner to find it and then it should give you a web icon to double click and get into it that way. I know what the IP address and hostname is... Title: Re: Web Interface Access on S3 Wifi? Post by: gt_addict on May 30, 2016, 03:02:19 PM Yea I know but it gives you another option to try and gain access to the gui.
Title: Re: Web Interface Access on S3 Wifi? Post by: ibminer on June 01, 2016, 06:45:36 PM Is the computer/device your connecting from on wifi?
I've always used hard wired connections so I'm not sure if there are any limitations on running completely off of wifi but do you have any wlan isolation modes enabled on your wireless router/ap that could be stopping you from talking to it on the wifi network? |