|
Title: DPS-2000bbb modding - Which pins to connect? Post by: polymer_city on July 03, 2016, 08:25:22 AM Hi can, I have connected A6 - C2 to power on - It powers on..
But it then goes to standby after a couple of minutes What is the other pins need to be connected to make it stay on? Thanks!! http://static.rcgroups.net/forums/attachments/3/1/3/5/4/3/a3982688-159-Bladecenter%202000w%20PS.jpg Title: Re: DPS-2000bbb modding - Which pins to connect? Post by: Tupsu on July 03, 2016, 08:42:23 AM What is the other pins need to be connected to make it stay on? http://static.rcgroups.net/forums/attachments/3/1/3/5/4/3/a3982688-159-Bladecenter%202000w%20PS.jpg You need a fan. Title: Re: DPS-2000bbb modding - Which pins to connect? Post by: polymer_city on July 03, 2016, 08:43:40 AM I have fans, I need to make it come out of standby mode
I'm testing and if I short C2 and C1 it comes out of standby.. But it doesn't seem to work all the time?? Title: Re: DPS-2000bbb modding - Which pins to connect? Post by: Tupsu on July 03, 2016, 08:56:53 AM I have fans, I need to make it come out of standby mode I'm testing and if I short C2 and C1 it comes out of standby.. But it doesn't seem to work all the time?? Works for me with C2 and A6 for 2 sngle PSU-s. Title: Re: DPS-2000bbb modding - Which pins to connect? Post by: polymer_city on July 03, 2016, 08:59:48 AM This is driving me insane..
I have 3 psu's 1 x 2000bb 2 x 2000bbb All do the same thing... after 1min DC light does out? Title: Re: DPS-2000bbb modding - Which pins to connect? Post by: Tupsu on July 03, 2016, 09:36:13 AM This is driving me insane.. I have 3 psu's 1 x 2000bb 2 x 2000bbb All do the same thing... after 1min DC light does out? Put a load to 12V and it will work. Title: Re: DPS-2000bbb modding - Which pins to connect? Post by: polymer_city on July 03, 2016, 09:40:52 AM Ok, not sure what was happening, it may have been a bad ground / dry solder...
Think one was too hot testing without fan and now with load its working.. done nothing different just changed jumper cable. Thanks for the help :) |
