Bitcoin Forum

Welcome to one of the oldest ethereum pool with detailed miner statistics.
Now we support Ironfish and Zephy mining too! With EXTRA reward paid each block!!! Get 5% more coins


ZephyProtocol mining pool address:

http://zeph.nanopool.org

 
PROMOTION at the start of the pool! The reward for each block of the first 1000 found has been increased by 1 ZEPH (8.4% bonus to the block value)

Confirmation: 100 blocks
Reward distribution: 240Min PPLNS
Commission: 1%
Minimum payout amount: 0.1 ZEPH
Supported connections: Stratum
Support for SSL connections
Possibility to mine on an exchange wallet


IronFish mining pool address:

http://iron.nanopool.org

PROMOTION at the start of the pool! The reward for each block of the first 6000 found has been increased by 1 IRON (5% bonus to the block value)

Confirmation: 10 blocks
Reward distribution: 360Min PPLNS
Commission: 1%
Minimum payout: 0.05 IRON
Supported connections: Stratum
Support for SSL connections
Possibility to mine on an exchange wallet

Kaspa mining pool address:

http://zeph.nanopool.org

Confirmation: 100 blocks
Reward distribution: 60Min PPLNS
Commission: 1%
Minimum payout amount: 50 KAS
Supported connections: Stratum
Support for SSL connections
Possibility to mine on an exchange wallet

EthereumPow mining pool address:

http://ethw.nanopool.org

Reward distribution: 20Min PPLNS
Commission: 1%
Minimum payout amount: 0.1 ETHW
Supported connections: Stratum
Possibility to mine on an exchange wallet

Ergo mining pool address:

http://ergo.nanopool.org

Confirmation: 100 blocks
Reward distribution: 60Min PPLNS
Commission: 1%
Minimum payout: 1 Ergo
Supported connections: Stratum
Possibility to mine on an exchange wallet

 

Conflux mining pool address:

http://cfx.nanopool.org

Confirmation: 500 blocks
Reward distribution: 30Min PPLNS
Commission: 1%
Minimum payout amount: 1 CFX
Supported connections: Stratum
Possibility to mine on an exchange wallet

Ethereum Classic mining pool address:

http://etc.nanopool.org

Reward distribution: 20Min PPLNS
Commission: 1%
Minimum payout amount: 0.1 ETC
Supported connections: GetWork/Stratum
Possibility to mine on an exchange wallet

Monero mining pool address:

http://xmr.nanopool.org

Confirmation: 120 blocks
Reward distribution: 180Min PPLNS
Commission: 1%
Minimum payout: 1 XMR
Supported connections: Stratum
Support for SSL connections
Possibility to mine on an exchange wallet

RavenCoin mining pool address:

https://rvn.nanopool.org/

Confirmation: 110 blocks
Reward distribution: 6Hr PPLNS
Commission: 1%
Minimum payout amount: 100 RVN
Supported connections: Stratum
Possibility to mine on an exchange wallet

 
On all our pools you can take advantage of detailed statistics of your rigs, convenient hashrate graphs, and detailed information on payouts.

We also provide you with access to our API and the ability to monitor your rigs using email alerts.

You will find more detailed information on setting up miner clients on the pages of our pool in the Help section

We will be glad to see you at nanopool B)

NEW OFFICIAL TREAD: https://bitcointalk.org/index.php?topic=5401460.0

Fixed Mail notification. Please, check the spam folder in your mail-client if you don't receive them.

I'm in...let's try this pool!

it is possible to mine on SIA with a BTC or ETH address so all SIA get payed directly in BTC or a ETH address?

Why sia payout have such high value?

Hello,
Transaction commission is 10 SIA - it's 0.2% of 5000.
Please, write to our support ( sia.nanopool@gmail.com ) if you really want to decrease your payout limit.


No, we do not provide auto-exchange service. Only direct mining.

Now you can mine Ethereum Classic with us!

Join http://etc.nanopool.org

your SIA pool does not display workers
(in ETC pool it is OK)

let try this mate i know pool is for good rig but let me try my luck using only a laptop so i can learn how this will work for both eth and sia.

Whats up with ETC nanopool? All rigs are showing as offline and statistics frozen for the past 2 hours!

Any idea when this will be fixed?

For the ETC pool, the rejection rate is between 10 to 20%. I ping the server, the time is just 36 ms. Why so high rejection.

Today was a hard day for our ETC pool.
Lot's of rejects, Statistic server crash and some other stuff.
But we've recovered statistic and resolved other issues.

Come mine with us!

Hows about no?

I lost half my mining/earnings for the day yesterday because of your shitty unreliable pool.

You payed 9 ETC for 720 MH of etc mining for 12! hours!... Fuckoff.

I have similar experience as I said before. Have you tried other pools which has lower rejection rate?

Are the Website down?

something up with the website?

sia shows no shares for 12+ hours, eth only shows one of my 2 machines active. but sia and eth miners are getting work and send shares that are accepted.

running claymore dual miner on win7 and ubuntu.

Im confused, why my hashrate very unstable ???
look at my stats

https://s18.postimg.io/xuubzld1l/Untistleds.jpg

in mining software (claymore) my hashrate very stable at 30mhs above but in nanopool current hashrate sometimes i get only 8mhs and usually under 20mhs ???

can you explain it ? why ?

ETC - Missing payment 09:00 9/9/2016 (EST), what is happening ?

I tried this pool few months back and it was working pretty good back then, is it still as good as before? I'm planning on switching from EthPool to NanoPool, the pure reason is the withdraw-able amount duration.

sia.nanopool.org

The payment seems to have stopped. Fix it please

I second that. The payments stopped coming few days ago.

EDIT: "There was a hardware issue with auto-pament node. It's resolved and auto-payments are running now."

Well I've been mining with this pool since the day I left the above comment, and I must admit that it's still great. Payments every like 6 hours and mining without any delay or hack. :)

Going to try the dual mine soon. I've been mining only ETC till now.

Is the payment fixed? Yesterday was my Last payment...
Any news?

You can mine ZCash with us! We've opened ZEC Pool. Beta-test now.
Join https://zec.nanopool.org

Their custom nheqminer isn't stable unlike the supernova's

I cant download the miner!!!

Sorry, you can't view or download this file at this time.

Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file that you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.

We've fixed Genoil miner support and updated Help page and binaries.
Please, use Genoil with AMD and nheqminer with NVidia to get best hashrate!

I try to mine the ZEC with CPU at 5H/s. But it seems the difficulty level is too high, I cannot submit shares within the time limit. Is it possibilbe to lower the difficulty limit for CPU?

I mine ZEC with you guys and didn`recieve coins in the last day. In payments there were 3 pending ones and after a while they didn`t confirmed, they just dissapear from the list  :o
my wallet adress is: t1JXaGpFFd6KB8DGnR6p3bFBgqUeR4oAQs6
Fix it please.

Hello,
We had several more non-confirmed ZEC-transactions, so we've initiated a new investigation on the issue and had to stop the payments for a while.
The results are:
1) Our previous assumption of fork-transaction was incorrect. Balance of that transaction was restored to accounts.
2) Transactions were silently refused by the network, but the wallet was still waiting for it. That happened after increasing the maximum number of tx outs to 1500 in the desire to reduce transactions count and the wallet size growing, as was suggested by the developers here: https://github.com/zcash/zcash/issues/1749
3) We had to reindex the wallet to restore proper balance, but it broke again after restarting the wallet... so we've moved to the new wallet again and split mining wallets from paying ones.
4) All the rejected transactions were unrolled.(Transactions removed, balances restored).
5) Payment system was updated and payments were executed.

We are really sorry for not having time to answer all the mails and messages at forums, as we were trying to clear the situation and fix the payments as soon as possible.
We've increased the mininmum payout limit to 0.005 ZEC to decrease the number of transactions.

Thanks for the effort.

Now you can mine Monero XMR with us!

SSL support
0% fee
Supported mining directly to exchange

Join https://xmr.nanopool.org

Fee for withdrawal is high ... as all other freak pools.

We made unofficial Android application for checking your mining on Nanopool. Try it, if you want.
https://bitcointalk.org/index.php?topic=1757090.0 (https://bitcointalk.org/index.php?topic=1757090.0)

Searching for beta-testers.
I have attached Nanopool API Data to Miner Control 1.7.0 - Auto profit switching miner controller.
Application thread is located here: https://bitcointalk.org/index.php?topic=769239.720 (https://bitcointalk.org/index.php?topic=769239.720)

Main features are:
-   Added all currently listed coins. For XMR not all API data active yet.
-   Profitability is calculated by pools API.
-   view balance for each coin
-   view totally accepted speed
-   view speed for particular worker.

Package with configs specially for Nanapool is available here:
https://mega.nz/#F!KkQFmBpY!anycul7w-ueed8MzBC1cfw (https://mega.nz/#F!KkQFmBpY!anycul7w-ueed8MzBC1cfw)

Hashrates in configs are defined for GTX1070 and R9 390.

It would be nice, if somebody could test it for correct work with pools data and report defined bugs.

Any chance to add a port with lower difficulty?

Hi,
Mining Pascal on Nanopool isues, 1 block found, 24 minutes mining:
- "Account not found" with Payment-ID
- Showing account 86646 with my account 86646-64 (show other hashrate, is oher user)


Murphy Law: 25 minutes mining and showing data properly width Payment-ID, still 86646-64 redirects to 86646

PASC price has tanked and Hashrate is way up no longer worth mining move on back to your coin of choice.

Added PASC pool. Minimum payout 5 PASC.

Mined Pascal for a few hours yesterday and verified my bat was correct with other miners that are seeing results, only to find no record of my time dedicated to mining Pascal.  Nano was the first pool I ever used, but this certainly may be the last.

Yes I'm using Poloniex, yes I removed the -64.  Yes I searched only the Payload number.  Nothing.

Are you using both the address+payload? .. ie ... -u 86646-64.XXXXXXXXXXXXXXXXXXXXX.rig01 -p x

If I want to mine PASC directly to Poloniex, what account name should I use before the payload?

6 hours not find block ?  ??? ??? ??? what hanppen on your pool ?

Pascal pool was badly needed, I'm now going to try out the dual mine, ETC+PASC on this same pool, but after I receive an answer to the following query:

I assume you're talking about XMR? Its not out of the ordinary to sometimes go 6hrs without finding a block. Its luck.

Is your ETH pool down? I keep getting "Job timeout, disconnect, retry in 20 sec" with Claymore's. Other pools work just fine.

Edit: It started working again after about an hour.

Edit 2: It stopped working again. And started working again. Seems a bit sketchy.

this is my favourite pool since 2016, I hope nanopool add decred pool too, I like this.

nanopool is down !!!  ??? ??? ???

dos attack ?

It's 2 hours I mined for nothing! :(

Yes, something wrong with pool. Tonight again pool down.

[2017-05-21 12:42:15] Starting on stratum+tcp://sia-us-east1.nanopool.org:7777
[2017-05-21 12:42:15] NVML GPU monitoring enabled.
[2017-05-21 12:42:15] 7 miner threads started, using 'sia' algorithm.
[2017-05-21 12:42:15] Failed to get extranonce1
[2017-05-21 12:42:15] Stratum subscribe answer id is not correct!
[2017-05-21 12:42:15] JSON-RPC call failed: (unknown reason)
[2017-05-21 12:42:15] ...retry after 30 seconds

Hi

what happends with api site? http://api.nanopool.org (or https://api.nanopool.org)

I saw Cloudflare Error 502 - This page is currently offline

and now I see Apache site info: 403 Forbidden

website looks ok.

Looks like the site is down yet again.

I believe my balance will be coming up on its threshold soon. Perfect time to switch to another pool.

Error on nanopool..


ETH - Total Speed: 155.489 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:04
ETH: GPU0 28.177 Mh/s, GPU1 28.197 Mh/s, GPU2 14.648 Mh/s, GPU3 28.075 Mh/s, GPU4 28.193 Mh/s, GPU5 28.199 Mh/s
 SC - Total Speed: 0.000 Mh/s, Total Shares: 3, Rejected: 0
 SC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
 SC: http error #28.
 SC: Failed to connect to pool (sia-us-east1.nanopool.org:9980/miner/header?address=<address>&worker=miner2&email=<name>@gmail.com), retry in 10 sec...

Poisson I think you are right this persons HAS NOT responded to anyone having problems on the pool!  That means he/she does not care!  I am going to go to a pool with damn support!

Great pool so far. I have my rig pointed at your pool as well as my sons.

Question about setting email so I can adjust payout timing.

On Windows using standard claymore - no issues getting it to work.

On Ethos, when I attempt to define the email address I get a worker showing up called "incorrect worker name".


If anyone has defined "Email" on Ethos, could you post your changes from local.conf or claymore.stub.conf.

I think I'll have to wait 2 days for the worker "Incorrect worker name" to time out.

Thanks

Never got this working on ethos.

But I did find a solution to change settings.

1. Stop mining on ethos
2. Run claymore or similar on a windows machine
3. Specify the same Worker name as your ethos rig. Add in the email address per instructions.
4. Mine 15-20 shares and you can change your settings.
5. If you have more than one Rig, you have to repeat this for every worker name.
6. Done.  You can now change settings.

Hi, when i'm trying to reach eth.nanopool.org i'm getting:
Error 502 Bad gateway

Does anyone facing this issue?

UPD: 20 minutes later seems to be ok

I hope it's only maintenance how they wrote on twitter 5 hours ago...

might be, thanks, could you share their twitter please?

welcome new p2pool stratum+tcp://95.59.72.81:7903 commission 0% dashcoin X11
Guide mining
Login your wallet Parol x

You have a 50% fee on your pool http://95.59.72.81:7903/fee
http://crypto.office-on-the.net/img/95.59.72.81_dash.png
No one will mine with such a fee

Added Electroneum mining pool!

https://etn.nanopool.org/

Seems to be having a few disconnects right now - it's nice to see a major pool adding ETN, moving here for a while :)

what mining software are u using for mining with nvidia cards?

ccminer 2.2.2 cuda

hello

if it will be possible in future to be add this type of coin BitcoinGold(BTG) & Zencash(ZEN) it will be great

thx

is there a problem with the SIA pool ??

no blocks for 2 days.....anyone knows something?

Hi Nanopool Users,

Matthew from Nanopool now is here.

So whenever you run into any trouble, let me know and i will take a look into that for you.

Hello Matthew,

I have mine for about an hour with an X3, but the pool only shows 23Kh/S, and the miner console shows 230kh/s. do not seems to ramp up to 220 just kinda get stuck 23-36kh.
it also shows a lot of rejected shares.

any idea why is that?

cheers

For me, only the "Average Hashrate for last 6 hours" work out. So I suggest you to mine for 6 hours and then look at that to make sure that everything is going alright.

"Current Calculated Hashrate" and "Last Reported Hashrate" never seem to be giving a correct number. I've been noticing that for a few years now. :P

Hello there,

Yep, Raja_MBZ has a point. Your 6-12 hours Average H/s has to match or at least has to be close to your Reported H/s. However I guess you're taking about X3+ETN, if so there is definitely something wrong. Miners are complaining of getting Rejected shares. Unfortunately we haven't got a chance to figure the issue out yet. Our X3 we ordered is still on its way. As soon as we got it, we will sort thing out.
 

Your problem is that the pool you are mining is understanding your hardware. The diff is too low.

If you want Electroneum ETN use:

URL: stratum+tcp://etn.jedipool.com:9999
Worker: doesn't matter.. whatever you want
password: x
when you add your wallet you just need the Address... No Miner ID

For Bytecoin BCN  use:
URL: stratum+tcp://bcn.jedipool.com:9999
Worker: doesn't matter.. whatever you want
password: x
when you add your wallet you just need the Address... No Miner ID

Hi everyone!


Nanopool has just launched RavenCoin mining pool. Be sure to check it out.


Pool features

* Fee is 0% while beta
* Payouts several times a day
* Payout commission is 0.0005 RVN
* Customizable payout threshold. Default limit is 100 RVN, minimum is 50 RVN
* Share difficulty is static and equal to 20
* PPLNS time frame is 12 hours


https://rvn.nanopool.org

Hey,

We've just launched Grin coin mining pool (Cuckaroo-29) and I'd like you to join us. The pool is currently in beta test and while that its fee is 0%.

Pool features

* Fee is 0% (while beta)

* Payouts occur a few times a day

* Payout fee is 0.0005 Grin

* Default minimum payout is 1 Grin

* Payout scheme is PPLNS

* Website: https://grin29.nanopool.org


Make sure you don't miss out on the 0% pool fee. And if you have any questions, feel free to message me.

Hi, bitmesh.com isn't in your list with exchanges. Can we use it for UID for grin pool?

Hi there,

You can use any valid GRIN address. Our exchange list is just recommended exchanges.

Hello!
I mining ETC, the shares are uneven, it happens to be an interval of 20-30 minutes.
Is it because of the difficulty of one shares?
Can it be reduced for evenness of shares?

Hello! Yes, that is correct. We provide high difficulty shares, therefore a number of submitted shares vary. Unfortunately the share difficulty cannot be reduced. However there's no need to worry as in the long run, your revenue will be what it should be. It's because not only share difficulty is higher but its price too. 

Hey everyone!

We have updated Nanopool's help page: https://help.nanopool.org (https://help.nanopool.org) Make sure to check it out!

@everyone
New rhminer 2.0 is out with RandomHash2/Pascal support for CPU.
Tested on Windows7, Windows 10, Ubuntu 16/18, MacOS.
Up to 110% faster than the reference miner.
Download : https://github.com/polyminer1/rhminer/releases/tag/2.0

cheers
Polyminer1

Hi, everyone! Official topic moved to another thread:
https://bitcointalk.org/index.php?topic=5401460.0

Please, post there. We've added several new coins this year! Now you can mine IronFish and Zephyr with extra profit, paid by the pool (each mined block reward increased by 1 coin)