Title: Getting m0mchill-poclbm to compile - mixed vector/scalar operation? Post by: dobitment on June 12, 2011, 10:29:09 PM Hi,
I'm using 64-bit Ubuntu and have been having a very difficult time getting m0mchill's poclbm to run. I have version 2.1 of the AMD software and believe that I've installed all of the appropriate libraries The version that I downloaded is here: https://github.com/m0mchil/poclbm/archives/master (the source, not the windows executable) I am running a 6950 with the following options: python poclbm.py -d 0 -v -w 128 -o xxx -p 8332 --user=xxx --pass=xxx The error that I get is: Build on <pyopencl.Device 'AMD Phenom(tm) II X6 1055T Processor' at 0x10d4380>: /tmp/OCLWr29ew.cl(45): error: mixed vector-scalar operation not allowed unless up-convertable(scalar-type=>vector-element-type) nonce = base + get_global_id(0) + (uint2)(0, 0x80000000U); ^ 1 error detected in the compilation of "/tmp/OCLWr29ew.cl". Any idea how I can fix this? Title: Re: Getting m0mchill-poclbm to compile - mixed vector/scalar operation? Post by: vulgata on August 23, 2011, 10:11:03 PM The error that I get is: Build on <pyopencl.Device 'AMD Phenom(tm) II X6 1055T Processor' at 0x10d4380>: /tmp/OCLWr29ew.cl(45): error: mixed vector-scalar operation not allowed unless up-convertable(scalar-type=>vector-element-type) nonce = base + get_global_id(0) + (uint2)(0, 0x80000000U); ^ 1 error detected in the compilation of "/tmp/OCLWr29ew.cl". Any idea how I can fix this? Hey, I'm getting the same error. Did you figure it out? |