Bitcoin Forum

Bitcoin => Hardware => Topic started by: djkus on September 14, 2016, 07:14:46 PM



Title: Spondoolies tech SP31 Issues
Post by: djkus on September 14, 2016, 07:14:46 PM
Hi, I picked up a second hand SP31 from eBay at a good price.
It arrived today well packaged, however one of the PSUS has a red LED on it , *the other one being green*

Swapping psus around the fault continues to be this psu

The system boots, but resets as soon as it starts to mine.

I have it running now at 1059.57Ghs but this is only using Loop 1 and Loop 2 *6 basics*
Anything more and it just shuts down.

The seller is sending me a replacement PSU thankfully.

Does this fault appear to be a PSU only fault?

Powering up the "faulty" psu outside the unit the fan doesn't even spin on it and it only draws 7w of power on my meter.

Any help much appreciated.



Title: Re: Spondoolies tech SP31 Issues
Post by: dsattler on September 15, 2016, 06:31:48 AM
Hi, I picked up a second hand SP31 from eBay at a good price.
It arrived today well packaged, however one of the PSUS has a red LED on it , *the other one being green*

Swapping psus around the fault continues to be this psu

The system boots, but resets as soon as it starts to mine.

I have it running now at 1059.57Ghs but this is only using Loop 1 and Loop 2 *6 basics*
Anything more and it just shuts down.

The seller is sending me a replacement PSU thankfully.

Does this fault appear to be a PSU only fault?

Powering up the "faulty" psu outside the unit the fan doesn't even spin on it and it only draws 7w of power on my meter.

Any help much appreciated.



Seems to be the psu. Don't care about the fan, most of the modern psus only start to spin the fan if they draw enough power, when they need cooling.