|
Title: Older gear (Dragon 28nm blades, KNC Neptunes, S5's, watercooling stuff) Post by: Finksy on September 18, 2016, 02:35:47 AM I have a bunch of old gen gear I'd like to get rid of. Make me reasonable offers on anything and I'm sure we can work out a deal. I won't be sending fully assembled dragon miners, as I have taken the PSU's and Ras Pi's out of them, but can ship the controller board and hashblades with or without heatsinks. Let me know.
1x KNC Neptune (sidehack I haven't forgotten about you, I have 1 set aside for the museum as well :)) A bunch of blades from 1Th/s and 2.3Th/s dragon miners 3x S5's 4x S5's in a Syscooling water-cooled kit with enclosure An extra un-used Syscooling S5 water-cooled kit with enclosure, heat sinks, etc. Can provide PSU's for this stuff, but not included. Can get pictures on request. Shipping from Ontario, Canada. Get your heat-bill-offsetting miners for cheap now before winter comes, if I get too cold up here I'll be plugging them in myself! Escrow through my main man OGnasty only. Title: Re: Older gear (Dragon 28nm blades, KNC Neptunes, S5's, watercooling stuff) Post by: jstew on September 18, 2016, 03:04:11 AM shoot me a price on that extra water cooling kit
its 2x s5 per enclosure? does it come with radiator and pump? Title: Re: Older gear (Dragon 28nm blades, KNC Neptunes, S5's, watercooling stuff) Post by: Finksy on September 18, 2016, 03:06:49 AM It's 4x S5 per enclosure (8 hashboards). I'll check to see if I have a rad and pump for that setup as well. I found with my setup that even with 6 fans on the standard rad in push-pull, I had to still underclock the S5's to ~1TH or slightly less each to not have it overheat. A larger rad than what came with it would have been ideal.
Title: Re: Older gear (Dragon 28nm blades, KNC Neptunes, S5's, watercooling stuff) Post by: jstew on September 18, 2016, 03:08:52 AM It's 4x S5 per enclosure (8 hashboards). I'll check to see if I have a rad and pump for that setup as well. I found with my setup that even with 6 fans on the standard rad in push-pull, I had to still underclock the S5's to ~1TH or slightly less each to not have it overheat. A larger rad than what came with it would have been ideal. hit me up with a pm when u find out and 8 blades per enclosure is perfect as i have 4x s5's still running , iirc either 2 or 4 of them i bought from u also if ur interested i have a bunch of enermax revolution87+ psus im selling maybe a trade? Title: Re: Older gear (Dragon 28nm blades, KNC Neptunes, S5's, watercooling stuff) Post by: Finksy on September 18, 2016, 05:14:28 AM Yes I think we did 2 + 2 on the S5's, glad they're still working out for you. But yea, I'll check to see what all I have to go with it as far as pumps/rads go. Not really interested in trading right now unless it's for GPU's. Thanks, I'll PM you tomorrow or Monday.
Title: Re: Older gear (Dragon 28nm blades, KNC Neptunes, S5's, watercooling stuff) Post by: jstew on September 18, 2016, 05:17:39 AM Yes I think we did 2 + 2 on the S5's, glad they're still working out for you. But yea, I'll check to see what all I have to go with it as far as pumps/rads go. Not really interested in trading right now unless it's for GPU's. Thanks, I'll PM you tomorrow or Monday. unfortunatly im down to my last gpu an 280x , got rid of what i had a while back and now kicking myself in the butt for it but anyways looking forward to ur pm Title: Re: Older gear (Dragon 28nm blades, KNC Neptunes, S5's, watercooling stuff) Post by: Finksy on September 23, 2016, 06:28:28 PM Bump, try your offers
|