Title: S5 antminer without IO board Post by: a29654 on September 22, 2016, 11:05:57 PM I just bought 2 antminer s5s without IO boards (for them really cheap). Can these miners hash without the board? If not is there a way to get them to hash without putting in a new piece?
Any help would be appreciated Title: Re: S5 antminer without IO board Post by: MyRig on September 24, 2016, 05:22:07 AM You need the Control PCB (IOBoard) to operate...
I just bought 2 antminer s5s without IO boards (for them really cheap). Can these miners hash without the board? If not is there a way to get them to hash without putting in a new piece? Any help would be appreciated Title: Re: S5 antminer without IO board Post by: BigFun on October 19, 2016, 01:03:57 AM I just bought 2 antminer s5s without IO boards (for them really cheap). Can these miners hash without the board? If not is there a way to get them to hash without putting in a new piece? Any help would be appreciated You need the control board, you can find them on Ebay pretty cheap. Here's an example to get you going http://www.ebay.com/itm/BeagleBone-Black-BB-Black-BB-board-BB-controller-Antminer-S7-S5-S5-or-S4-/172366279843?hash=item2821d4b4a3:g:1rIAAOSwCGVX7M2o (http://www.ebay.com/itm/BeagleBone-Black-BB-Black-BB-board-BB-controller-Antminer-S7-S5-S5-or-S4-/172366279843?hash=item2821d4b4a3:g:1rIAAOSwCGVX7M2o) You will also need the ribbon cables that go from the control board to each miner blade and one control board power cable. |