|
Title: Antminer S9 Warranty Seal? Post by: mg3dprinting on October 10, 2016, 02:06:29 PM Hello,
Does anybody know where the warranty seal is located? I looked in the obvious places, but did not see anything. I see a sticker with a warranty number, but it is not sealing anything. I am in the process of returning a miner and they said the seal must be intact for refund. I want to document that the seal is in fact sealed before returning. Thanks for the help! Title: Re: Antminer S9 Warranty Seal? Post by: NotFuzzyWarm on October 10, 2016, 02:16:12 PM Looking at the exhaust end of the miner the seal is usually covering the top-left screw which holds the end plate onto the case. It is a thin blue/white sticker.
Title: Re: Antminer S9 Warranty Seal? Post by: mg3dprinting on October 10, 2016, 02:20:43 PM Looking at the exhaust end of the miner the seal is usually covering the top-left screw which holds the end plate onto the case. It is a thin blue/white sticker. Thanks for the reply. That's where I figured it would be, but I see nothing. Should I be concerned that warranty seal was not placed or already removed? Title: Re: Antminer S9 Warranty Seal? Post by: NotFuzzyWarm on October 10, 2016, 05:31:45 PM Looking at the exhaust end of the miner the seal is usually covering the top-left screw which holds the end plate onto the case. It is a thin blue/white sticker. Thanks for the reply. That's where I figured it would be, but I see nothing. Should I be concerned that warranty seal was not placed or already removed? Title: Re: Antminer S9 Warranty Seal? Post by: mg3dprinting on October 10, 2016, 05:36:05 PM Looking at the exhaust end of the miner the seal is usually covering the top-left screw which holds the end plate onto the case. It is a thin blue/white sticker. Thanks for the reply. That's where I figured it would be, but I see nothing. Should I be concerned that warranty seal was not placed or already removed? Yes, it was purchased through Bitmain's Amazon Store. Thanks for the suggestion. Title: Re: Antminer S9 Warranty Seal? Post by: gt_addict on October 10, 2016, 05:54:53 PM I wasn't aware they had an amazon store I thought they only sold direct through their website ???
Title: Re: Antminer S9 Warranty Seal? Post by: MyRig on October 10, 2016, 07:24:07 PM without going too much in details, for future reference, please BE EXTREMELY CAREFUL when you are removing screws from the unit or installing after market items for system's physical modification.
Loss of the warranty seal = Loss of the warranty seal It is there to validate no intrusion was made to the internal components or modification that may affect the safely sound operation. when the seal is gone, that validation is no longer there to assure no modification was done before the system failed. (more specific to dead asics) Example: (It is really close to the rear fan and sometimes it is extended on to the rear fan) https://s14.postimg.org/ek1gefe29/warrantyseal_fan.png Title: Re: Antminer S9 Warranty Seal? Post by: eddiephx on July 30, 2017, 09:22:33 AM Great I removed the screws to clean out dust. Now a couple months later one hash board is dead, I am still within the warranty. So my warranty will be void since I removed the sticker? Is there anything I can do?
|
