|
Title: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: ANTZ25 on October 11, 2016, 03:13:04 PM Hello, I'm having issues with 2 hash boards in 2 separate S9's. the first is weird behavior, in the next screen caps you can see it,
starts normal and after a while the board 2 (middle) start to show X, some times missing chips, and sometimes the entire board disappears. I change power supplies, same issue, change data cables, same issue, change the board to another miner, same issue lower clock speed (even to 100), same issue swap control, same issue any body have a idea of what the problem could be? i watch a video on youtube that maybe be cold solder points? there is no physical signals of any damage (burn point in the board, missing components, missing heat sinks). I contacted bitmain to try to troubleshoot the boards or maybe send details info for repair but the answer is just send the boards to Hong Kong, I'm hopping that to be last resource. the second board just seems dead, no lights, no heat, nothing shows on webui, dead. all miners working between 40-50°C. miners are Antminers S9-B10 (11.85Th/s - 550MHz) https://s9.postimg.org/jc1llpelb/image.jpg https://s9.postimg.org/4u4edpna7/image.jpg https://s9.postimg.org/4imy0y6u7/image.jpg https://s9.postimg.org/wwsdktue7/image.jpg https://s9.postimg.org/yd3w2yxb3/image.jpg https://s9.postimg.org/oh7eh2gwv/image.jpg https://s9.postimg.org/6sfnpg55r/image.jpg https://s9.postimg.org/foqftdvrz/image.jpg https://s9.postimg.org/5fxynk7q7/image.jpg Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: philipma1957 on October 11, 2016, 07:53:24 PM first screen shot is 14 seconds complete waste of time
second screen shot 45 seconds almost a complete waste of time third screen shot shows me a very weird board that reads 251 c for temp and is about 1 hour in fourth is like the third Did this gear work for two months ? august to oct? Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: gt_addict on October 11, 2016, 08:00:27 PM Where are you located?
If youre in the US then you could try Bitmain Warranty in the states. Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: philipma1957 on October 11, 2016, 08:01:45 PM as gt_addict says usa is cheaper to ship to. if you live in usa.
but did they work for you for two months then die off? Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: ANTZ25 on October 11, 2016, 08:09:37 PM first screen shot is 14 seconds complete waste of time second screen shot 45 seconds almost a complete waste of time third screen shot shows me a very weird board that reads 251 c for temp and is about 1 hour in fourth is like the third Did this gear work for two months ? august to oct? work for around 2 weeks, then started to behave weird, the random x appearing and dessapearing. I removed the defective board, the others 2 board are currently hashing at expected hash rate at stock 550MHz speed. Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: ANTZ25 on October 11, 2016, 08:20:01 PM Where are you located? If youre in the US then you could try Bitmain Warranty in the states. I am not in the US, but is way closer and cheaper than hong kong, sorry but I wasn't aware there is a bitmain dealer in the US, I just open the ticket and that's what they told me, just send them back. how do I contact bitmain in the US? Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: gt_addict on October 11, 2016, 08:30:07 PM Where are you located? If youre in the US then you could try Bitmain Warranty in the states. I am not in the US, but is way closer and cheaper than hong kong, sorry but I wasn't aware there is a bitmain dealer in the US, I just open the ticket and that's what they told me, just send them back. how do I contact bitmain in the US? Here is there profile on the forum:- https://bitcointalk.org/index.php?action=profile;u=383527 All contact info is there ;) Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: ANTZ25 on October 11, 2016, 08:35:04 PM Where are you located? If youre in the US then you could try Bitmain Warranty in the states. I am not in the US, but is way closer and cheaper than hong kong, sorry but I wasn't aware there is a bitmain dealer in the US, I just open the ticket and that's what they told me, just send them back. how do I contact bitmain in the US? Here is there profile on the forum:- https://bitcointalk.org/index.php?action=profile;u=383527 All contact info is there ;) thanks! Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: ampereman on February 05, 2017, 01:22:30 PM I have a similari problem. Frequency at default in an antminer s9 12.93
This is after 10 days and more.... https://postimg.org/image/ze1huqhsn/ Basically a blade is often suffering of the problem in the picture. If I reboot it works well for a while and after a period the problem appears again. This is after few hours https://postimg.org/image/c66lxcbtl/ How is possibile that i have a lot of xxxxxx xxx but the having rate is right? Can you guys help me on this? Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: ANTZ25 on February 06, 2017, 06:47:04 PM try a few things first, try with lower hashrate (if the firmware allow it) if still having the problem, replace power supply and test, replace or swap data cables (ribbon white ones) and test, if you have more than one miner, try putting the board on another miner, if problem persist just send them to repair.
Title: Re: Antminer S9-B10 hash board problems (weird behavior and dead) Post by: vianez on August 24, 2017, 08:14:42 PM Hello, same problem here... exactly the same.
Any news about the problem or about the RMA process on BITMAIN? Thankyou |
