Bitcoin Forum

"Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480)"
Anyone get close 45 sol/s on his(her) RX480 ? I tried different rigs , different brand RX480 , custom rom/original rom but can not get more than 19-21 sol/s

there is a example how to share your zcash mining setup ,it will be helpful for another members :)

Operation Sysytem :  Win 10 64bit
Wallet : Kranken
Miner : genoil-zec-miner-0.3.2 / zcashclient-0.1.1
Speed : 20-21sol/s                    19-21sol/s
Pool: http://zcash.flypool.org/
VGA Card(s) GPU/Mem: Msi Gaming RX480 8gb / Gigabyte rx480 8gb / Nitro rx480 8gb / xfx rx480 8gb
VGA driver : 16.7.1 and up on different rigs
Bat or start file settings :
genoli : genoil.exe -c eu1-zcash.flypool.org:3333 -u "your_t_address.rig1" -p z

CPU (if you mining with cpu):
CPU Mining Speed :

first shot at it:

nicehash miner, converting to BTC
win 7 x64
g3140 cpu @ ~6.5sol/s
H97 mobo
2x GTX 1070 @ ~35/ea
3x R9 270X @ ~6/ea

total is about 88 sol/s. i feel like i can get more from the amd cards though

edit: after ~4hrs its averaged about 84sol/s. I can live with that, but i expect a good miner could get >10sol/s from a 270x

My main CPU miner :

Operation Sysytem :  Windows 7 64 Bits
Wallet : Pool's wallet
Miner : Suprnova's fork of nheqminer
Pool: http://zec.suprnova.cc/
CPU : i5-3570k
CPU Mining Speed : 17 Sol/s
Bat or start file settings :
nheqminer -u "username.workername" -p "password"

My Nvidia setup :

Operation Sysytem :  Windows 7 64 Bits
Wallet : Pool's wallet
Miner : I don't remember
Speed : 47 Sol/s for the whole system
Pool: http://zec.suprnova.cc/
VGA Card(s) GPU/Mem: KFA2 970 4Gb / KFA2 1070 8Gb / Intel Celeron G1820
VGA driver : I don't know
Bat or start file settings :
Default setup with "-cd 0 1" at the end

A CPU I tested on my AMD rig that I can't put to mine :

Operation Sysytem :  Windows 7 64 Bits
Wallet : Pool's wallet
Miner : Suprnova's fork of nheqminer
Pool: http://zec.suprnova.cc/
CPU : Intel Celeron G1840
CPU Mining Speed : 2 Sol/s
Bat or start file settings :
nheqminer -u "username.workername" -p "password"

Operation Sysytem :  Win 10 64bit
Miner : nheqminer 0.2a
Speed : 85 Sol/s
Pool: suprnova
VGA Card(s): 1x GTX 1070, 3x GTX 750Ti
Bat or start file settings : nheqminer -u mugatu.1 -p x -cd 0 1 2 3
CPU: i5 3570k
CPU Mining Speed : included in total above


Operation Sysytem :  Win 8.1 64bit
Miner : nheqminer 0.3a
Speed : 44 Sol/s
Pool: suprnova
VGA Card(s): 1x RX 480, 4x 7850
Bat or start file settings : nheqminer_suprnova -u mugatu.1 -p x -od 0 1 2 3 4 -t 0
CPU: sempron
CPU Mining Speed : not mining

OS: Windows 7 64 bit
Miner: nheqminer_v0.3a
Speed: 49.x Sols/s
Pool: Zcash
VGA Card(s): 1x 8GB RX 480, 1x 4GB R9 380x, 1x 3GB R9 280x
CPU: AMD FX-8370 Eight-Core Processor
Bat: nheqminer_zcash -l usa -u <wallet_address> -t 4 -od 0 1 2

can anyone tell me what the I/s stands for in the hash rate?

[2016-10-29 00:38:22.545302][0x00000da8]: Speed [300 sec]: 26.2433 I/s, 49.3333 Sols/s
[2016-10-29 00:38:23.109334][0x0000173c]: stratum | Submitting share #1110, nonce 0100000000000000000000000000000f
[2016-10-29 00:38:23.178338][0x00001508]: stratum | Accepted share #1110

How my sol's look for my configuration?

Did further testing and my processor gets 16 Sol/s by itself.  That means my cards are not near what they should be getting with nheqminer at all.

I'm getting that hash rate with my 3x RX 480 8 GB's, and you are getting the same hash rate with comparatively less model graphics cards, so your hash rate seems pretty good to me.

I confirm it. They're pushed at about 60% of their power and they're running at around 40% of their TDP.

I am still playing around.   I think that I can get a little more out of the setup.

Operation Sysytem :  Win 10 Pro 64bit
Wallet : BTC Wallet
Miner : nheqminer_v0.3a
Speed : 91-92sol/s
Pool: http://nicehash.com
VGA Card(s) GPU/Mem: evga gtx980 hydrocopper 4gb / nvidia titan x pascal 12gb
VGA driver : 373.06
Bat or start file settings:  nheqminer.exe -u btc_address -t 6 -cd 0 1
CPU (if you mining with cpu): i7 6700k
CPU Mining Speed:  4 GHz

Operation Sysytem :  Win 7 64bit
Miner : nheqminer 0.3a
Speed : 52 Sol/s
Pool: nicehash (BTC)
VGA Card(s): 1x GTX 970
Bat or start file settings : nheqminer -cd 0 -u 1ABTgswKgh47cWaA9xGYxLp1TF9NosXF9C
CPU: i7 5820K@4.2
CPU Mining Speed : included in total above

Operation Sysytem :  Win 7 64bit
Miner : nheqminer 0.3a
Speed : 15-19 Sol/s
Pool: nicehash (BTC)
VGA Card(s): none
Bat or start file settings : nheqminer  -u btc adress
CPU: Fx 8350 Black Edition @4.2
CPU Mining Speed : included in total above

update


Operation Sysytem :  Win 10 64bit 4 PC's
Wallet :Poloniex  T address
Miner : genoil-zec .4.1 for my 470  and .4.2 for my 370 and 280

VGA Card(s):
rig 1, XFX RX 470 4 GB / SAPPHIRE REF RX 470 4GB /SAPPHIRE  Nitro rx470 4g
rig 2, r7 370 4gb
rig 3, r7 370 4gb
rig 4, R9280 3gb 
VGA driver : Crimson Edition 16.10.3 Hotfix

speed  :rig 1  zec-sa#0: 32.9S/s/zec-sa#1: 30.1S/s/ zec-sa#2: 35.5S/s    
speed  : rig 2 zec-sa#0: 26.7S/s  
speed  :rig 3 zec-sa#0: 27.9S/s  
speed  :rig 4  zec-sa#0: 31.5S

Pool: us1-zcash.flypool.org:3333

Bat or start file settings :
rig 1 genoil.exe -c us1-zcash.flypool.org:3333  -u zec t address.rigx -p z
rig 2 genoil.exe -c us1-zcash.flypool.org:3333 -u zec t address.rigx -p z
rig 3 genoil.exe -c us1-zcash.flypool.org:3333 -u zec t address.rigx -p z
rig 4 genoil.exe -c us1-zcash.flypool.org:3333 -u zec t address.rigx -p z

CPU (if you mining with cpu):
not using


IF you don't know what silentarmy kernels, is or does .

https://www.youtube.com/watch?v=28wGCQT6lfI

can someone explain me how the fuck if i try to buy some hashrate in nicehash the order is not stable because the pool difficulty is too low?  >:(

Operation Sysytem :  Win 10 64bit
Wallet : Kraken
Miner : genoil-0.4.1
Speed : 20-30 (140-150H/s for 6)
Pool: https://zec.nanopool.org
VGA Card(s) GPU/Mem: MSI RX 470 8GB stock
VGA driver : 16.9.2?
Bat or start file settings : genoil.exe -c zec-eu1.nanopool.org:6666 -u address -p x -P 0 -g 0 1 2 3 4 5

Operation Sysytem :  Win 10 / 64bit
Wallet : kraken
Miner : nheqminer_v0.3a_suprnova
Speed : 19.5 -20.5 sol/s
Pool: zec.suprnova.cc
VGA Card(s) GPU/Mem: Asus reference gtx980 4gb
VGA driver : 375.63
Bat or start file settings:  nheqminer_suprnova -u username.workername -p 123 -t 0 -cd 0


CPU (if you mining with cpu): i7 5960X
CPU miner : nheqminer_v0.3a_suprnova
CPU Mining Speed with -t 10 : 29.2 - 30.5 sol/s
CPU Mining Speed with -t 8 : 27.5-27.8 sol/s
Bat or start file settings for CPU mining only :  nheqminer_suprnova -u username.worker -p 123 -t 10

Even if you buy one, they cancel after a short time (my case).
I'm talking about the 24 h contracts. I ordered one ( 0.1 kSol/s) and after 1 hour they cancel my order and refund my bitcoins.

Woot!  I increased my earnings big time now.

OS: Windows 7 64 bit
Miners: nheqminer_v0.3a, genoil-0.4.1, Claymore 8.0.7
nheqminer (CPU, R9 280x: = 37 Sol/s
genoil-0.4.1 (RX 480, R9 380x): = 21.78 Sol/s
Claymore (mining Eth): = 45.6 MH/s
Pools: Coinotron and Suprnova
CPU: AMD FX-8370 Eight-Core Processor

Before I used this combo I was only getting.  16 MH/s Ethereum and 45 Sol/s.   
Claymore by itself 60 MH/s
nheqminer by itself 50 Sol/s

Operation Sysytem :  Win 8.1 / 64bit
Wallet : poloniex
Miner : nheqminer_v0.3a_coimine
Speed : 151 sol/s
Pool: coinmine
VGA Card(s) GPU/Mem: 5x gtx 1070's on a VENUS PRIME
VGA driver : 373.02

IMAGE WITH A 6X VENUS PRIME MODEL
http://www.cryptenergy.com/images/venus1.jpg

http://www.cryptenergy.com/

   settings for r9 380 4g

no dump stop?

pump again?

Hi allz i have a problem. Using zcashgpuclient_silentarmy build from git for ubuntu 14.04.

rig1   GPU   4   39 ms   0 C°   27.515 sols/s    2 cards
rig2   GPU   4   39 ms   0 C°   27.211 sols/s    2 cards
rig3   GPU   4   39 ms   0 C°   27.713 sols/s    2 cards
rig4   GPU   2   36 ms   0 C°   25.237 sols/s    1 card

I cant understand why the rig with 1 cards make almost the same like theese with 2 cards

config rig4
server = "coinsforall.io";
port = "6668";
address ="t1WAhAPgwbk8J3rHAfwbHHAggg2QjuBM7Lt";
name ="rig4";
platform="amd";
onCrash="0";
devices=["1"];
worksizes=["256"];
threads   =["8192"];
corefreq  =["-1"];
memfreq   =["-1"];
powertune =["-1"];
fanspeed =["-1"];

configs rig 1-3
server = "coinsforall.io";
port = "6668";
address ="t1WAhAPgwbk8J3rHAfwbHHAggg2QjuBM7Lt";
name ="rig4";
platform="amd";
onCrash="0";
instances="2";//tryed with and without it no change
devices=["1","1"];
worksizes=["256","256"];
threads   =["8192","8192"];
corefreq  =["-1","-1"];
memfreq   =["-1","-1"];
powertune =["-1","-1"];
fanspeed =["-1","-1"];

Please someone help me, 10x in advance

Operation Sysytem :  Win 7 pro 64bit
Wallet : bittrex
Miner : nicehash
Speed : 30.0 sols/s GPU + CPU
Pool: nicehash
VGA Card(s) GPU/Mem: AMD R9 380 2 GB @ 1100/1500
VGA driver : 16.4
Bat or start file settings : none
CPU (if you mining with cpu): 3570k 3.4 @ 4.1
CPU Mining Speed : included in above total

What setting are you using with nheqminer? And Genoil? Thanks.

Operation Sysytem :  Win 10 pro 64bit
Miner: Genoil miner with silentarmy solver Version 0.50
Speed : 130-140 sols/s 5 x 280x
Pool: https://www2.coinmine.pl/zec/
VGA Card(s) GPU/Mem: 5 x AMD R9 280x 3GB stock setting
VGA driver : 16.9.2
Bat or start file settings : genoil.exe -c zec.coinmine.pl:7007 -u sikman.5gpu -p x -i 20 -g 0 1 2 3 4 -w 64 -P 0
CPU (if you mining with cpu): NA
CPU Mining Speed : 130-140 sols/s 5 x 280x

http://imgur.com/aOoOQ33 (http://imgur.com/aOoOQ33) see screenshot

Is anyone here mining with Windows and R9 Nano (or maybe Fury)?

Under Linux, Silent Army developers talk from "44 - 45 Sol with R9 Nano possible".
If I start one mining task, every Nano delivers 22-23 Sol - half of the desired hasrate above, fine.
But if I start a second task, the Nanos drop down to 2x 15-16 Sol - far away from 44-45 Sol.

Any experiences or ideas?

After 2 days of fighting with the "bugs" of Supernova ZEC pool,  I came to the conclusion that this pool is a big scam! First, they selectively pay to someone, and to others don't pay at all. The balance is ''unconfirmed" for 2 days!!! Second, their site is down every couple of minutes pretedning to be upgrading, thus preventing users to control what is going on. And third, most of the workers are "unauthorized" which leads to hashing for someone else's profit. From my 50 workers, only 2 are 'authorised' to work and the shares are accepted. I don't see any confirmed balance on these workers either! >:( :o ??? I believe that this is an outrageous scam robbery!!!!

I'm using zec.suprnova.cc from the beginning for mining zcash . I never had a problem with them . Every pool have some basic problems , the zcash mining is in a "slow-start" period during the first 20,000 blocks (about 34 days)  where the block reward linearly increases to 12.5 ZEC. This is designed to reduce the impact of a potential negative event like "a major bug" or "security vulnerability and another possible problems . Also it's give a time to pool owners , wallet service providers to fix any issue .
If you have a unauthorized worker error msg , you need to delete the .bin files or chace files from your miner folder , restart your pc and wait a few minutes ... that maybe help fix ur problem .
Yes they have some trouble with website , so what u see there that maybe not accurate, same thing happening with another pools . They working hard to fix all the issue , what they discovered in the past few days .
What I know I have 850-900 KH/s hashing power directed to that pool , and zcash coins showing up in my wallet as is expected.

I get many payouts. The payouts work set it to what you want. I have about 80 Sol/s and set my payout to around .005.  I got a good payout of .00749 today before 24 hours.. sitting in Polo waiting for it to ramp up again.  Miners are idiots there is more buy orders than there is coins for selling.  They start panic selling and cause price drop to below 1 BTC.  The morons sell all they have.. than the buyers start buying from the smart miners and price gets back over 2 BTC's again.. I sold my .004x coins for 2.8 BTC yesterday.

It was hilarious the price went from .7 to over 3 BTC in about an hour's time. it just skyrocketed once the moron miners threw away there coins.. LOL

Operation Sysytem :  Win 10
Miner : Genoil 4.1 set on a 200 second restart (v5 kills the drivers regularly so had to roll back).
Speed : 170-250 (very variable)
Pool: suprnova
VGA Card(s): 6 x Sapphire nitro 8gb rx480s - default bios (eth bios very unstable with amd drivers)
Bat or start file settings: default
CPU: i7 haswell something (upgraded this today made a huge difference, as well as changing from 1 x 4 gig ddr3 to 2 x 8 gig)
CPU Mining Speed : not mining

Suprnova - seems very reliable, struggled with coinsforall but extremal was very helpful.

Operation Sysytem :  Win 7 64bit
Wallet : Directly to poloniex
Miner : genoil-zec-miner-0.5
Speed : 90-95 sol/s
Pool: http://zcash.flypool.org/
VGA Card(s) GPU/Mem: 4 pcs Sapphire R9 380 4GB @stock speed
VGA driver : 16.7.1
Mobo : ASrock H81 Pro BTC
Bat or start file settings :
genoil : genoil.exe -c eu1-zcash.flypool.org:3333 -u "adress" -i 20 -w 64 ( other combination of -i and -w causes instant crash of miner, some combinations throw down drivers )

CPU :Intel pentium G3254@4,4GHz 1,250V
CPU Mining Speed :5-6 sol/s

I´m not mining at CPU now because it drops solrate at GPU to 30-40 sol/s

Power draw in wall socket meter is around 600W, which is nice change from 975-1020W upon ETH.
Good hunting of sol/s  :) ;D

Hi Folks,

first of all, a Coin without a multi platform wallet
is n´t a Coin at all 4 me.

But I am able 2 sell a littlebit of my diverse (CPU/GPU) Power @NiceHash,
even thought is seems, "they" are earning more then fair !

... a few of my SOL-Rates here:
(nheqminer_v0.2/3a under Win7_64 against NiceHash 4 BTC)

- i3-6100  @Z170 -t 3  ~17.xy SOL/s  
- i3-6320  @Z170 -t 3  ~20.xy SOL/s
- X9650  @X38 -t 2  ~03.xy SOL/s
- i5-3365M  @TP-530 -t 3  ~08.xy SOL/s
- E3-1240v5 @C236 ~29.xy SOL/s
- E5-1650 @KVM-VM -t 6 ~19.xy SOL/s
- E5-1650v4 @KVM-VM -t 2 ~09.xy SOL/s
- E5-1620 @KVM-VM -t 4 ~09.xy SOL/s
- i5-6600K  @H170 -t 3  ~22.xy SOL/s
- G4400  @H110 -t 1  ~4.xy SOL/s
- W3565 @X58 -t4   ~4.xy SOL/s
- 2 x RX-480 + 2 x RX-470 ~74.xy SOL/s
- GTX-1070 ~32.xy SOL/s

... 2 be continued .

 8) PanneKopp

P.S. everything "@stock" and "rockstable"

My CPU miner 1:

Operating Sysytem :  Windows 8.1 64-Bits
Wallet : coinbase
Miner : nheqminer from NiceHash
Pool : nicehash
CPU : i7-3770 @ 3.40Ghz
CPU Mining Speed : 18 Sol/s for all 8 threads
Bat or start file settings : nheqminer.exe -t 8 -l hk -u MY_BTC_ADDRESS.worker1


My CPU miner 2:
Operating Sysytem :  Windows 8.1 64-Bits
Wallet : coinbase
Miner : nheqminer from NiceHash
Pool : nicehash
CPU : i5-2310 @ 2.90Ghz
CPU Mining Speed : 15 Sol/s for all 4 threads
Bat or start file settings : nheqminer.exe -t 4 -l hk -u MY_BTC_ADDRESS.worker2

My CPU miner:

Operating Sysytem :  Windows 10 Pro 64-Bits
Wallet : poloniex
Miner : nheqminer from NiceHash
Pool : nicehash
CPU : i5-6600K @ 4.20Ghz
CPU Mining Speed : 20 Sol/s for all 4 threads
Bat or start file settings : nheqminer.exe -t 4 -l hk -u MY_BTC_ADDRESS.worker1

This is my cpu only.
Today I will get a rx470 and will test it, how far I can max it out with bios mod etc.

I have the same experience. I use with Windows 8.1 and Criomson 16.9.2. It is much lower than 44.

Operation Sysytem :  Win 7 pro 64bit
Wallet : poloniex
Miner : genoil 0.6
Speed : theory ~240S/s, actual on pool sometimes goes up to 260-275.
Pool: flypool
VGA Card(s) GPU/Mem: 4x Sapphire RX470 8Gb, 2x Sapphire RX470 4Gb, 2x R390X, 3 rigs total
VGA driver : 16.9 + 16.10
Bat or start file settings : not using -k zec zec except on the R390Xs where it's stable
CPU (if you mining with cpu): I get 7.5 on a Core i5, 18 on a 1st gen i7 (stopped using it, impacted the GPU hashrate)
CPU Mining Speed : 10S/s (using the i5 + experimenting on a virtual machine on an ESX with an Atom, get around 2.5 out of it)

CPU mining only (to see how the old CPUs can perform).

Operating Sysytem :  Windows 10 x64
Wallet : suprnova
Miner : suprnova's v0.3a
Pool : suprnova
CPU : i7-920 @ 2.66
CPU Mining Speed (reported by miner): 3.6 Sol/s (I don't know if I have to multiply with the number of threads or not)
Bat or start file settings : start /low nheqminer_suprnova -u ....... -p ....... -t 6 -q

Operating Sysytem :  Windows 10 Pro 64-Bits
Wallet : poloniex
Miner : cpu nheqminer and genoil for gpu
Pool : nanopool
CPU : i7-4790K @ 4.40Ghz
CPU Mining Speed : 22 Sol/s for all 8 threads
GPU: 290X 45sol, 370X 22sol.

Operating System :  Windows 8.1 Pro 64-Bits
Miner : CPU & GPU nheqminer 0.3a
Pool : Miningpoolhub
CPU : i5-4690K @ 4Ghz
CPU Mining Speed : 10 Sols/s, 3 threads
GPU: 1070, 36 sols/s

Total 46 Sols/s

Operating System :  Windows 10 Pro 64-Bits version 1511

Pool : flypool

GPU Miner: genoil 0.6
CPU Miner: nheqminer_v0.2_flypool

CPU : FX 8350, 14 Sols/s, because I have to underclock it. Iam still using 8 cores @ 70% (2.76GHz instead of 4.00GHz) This CPU can probably get 18 Sol/s or more if it's overclocked

GPU: 3x MSI R9 380 4gb, 60 sols/s
GPU: R7 370 4gb Sapphire vaporX, 14 Sol/s

Driver: AMD 16.1
Total 85-90 Sols/s

Which amd driver is the best so far guys? I got 16.1 going 20 Sol/s with a r9 380 4gb

GPU Miner
Operation Sysytem : Win 10 64bit
Wallet : Poloniex
Miner : genoil-zec-miner-0.6
Speed : ±70 Sol/s
Pool : coinmine.pl/zec
VGA Card(s) GPU/Mem : 2 x PowerColor RX 480 Red Devil 8GB (both at GPU:1200/Mem:2150)
VGA driver : 16.9.2
Bat or start file settings : genoil.exe -c zec.coinmine.pl:7007 -u username.worker -p x -z 1 -f 0

CPU Miner using laptop ;D
Operating Sysytem :  Win 10 64bit
Wallet : Poloniex
Miner : nheqminer.v0.3a_coinmine
Pool : coinmine.pl/zec
CPU : i5-2430M @2.8GHz
CPU Mining Speed : 8.8 Sol/s for all 4 threads
Bat or start file settings : nheqminer.exe -u username.worker -p x -t 4 (automatic geolocation and failover address)

GPU (6 cards rig)

RX 480 8Gb (3x Nitro+, 2x Ref, 1x MSI)

All 1125/2080 - custom ROM

All 28-30 Sol/s

CPU (laptop)

i7 3517U (Dual Core)

Core 1 - 7Sol/s, Core2 - 3Sol/s

GPU: Geforce GTX 960
CPU: Intel i5 6500

Total 25 sols.
Some people saying only with gpu they're taking 80-90 sols, how ? Where is my mistake ?

6 x290x reference are 1000/1125mem, -75mv core, with modded roms, 24ish - 34ish, @ 900 watts to the wall for genoil V0.5 15.12 drivers on Win 10.

6x280x Vapours  1150/1500mem 14ish - 31ish @ 800ish watts genoil V0.5 16.10.3 drivers Win 10.

5xNano's 900/300 modded roms 13ish -20ish PLUS 7990 1050/1500 15ish - 20ish = 500 watts to the wall. They are running 2 instances on the same Win 10 machine, updated the display drivers now to latest.

4GB RAM cheap CPU's H97 or H81 boards

timeout 30
:start
taskkill /F /IM genoil.exe
cd C:\Users\miner\Downloads\genoil-zec-miner-0.5\genoil-zec-miner-0.5
timeout 10
start  genoil.exe -c us1-zcash.flypool.org:3333 -u address.GPUrig1A -p z
TIMEOUT /T 1800
goto start
pause

Edit: CPU Xeon E3-1265L V3 2.5GHz = 29ish with a TDP of 45 watts

did make this setup work for a buddy.

Operation Sysytem :  Win 10 64bit
Miner : nheqminer
gpu only Speed : 15-20 Sol/s
Pool: nicehash (BTC)
VGA Card(s): 570 twin frozr
gpu needed:  0.3a version was compiled only for compute capability 5.2 , your card is older, you need compile cuda_tromp.dll for your card or use older (slower) from version 0.2a (https://github.com/nicehash/nheqminer/issues/82)

I have the similar speed for the R9 Nano. It is way below the speed achieved by the creator of silentarmy.

your gpu driver is out of date for mining.. and theres no newer version available to make it workin

just turn off gpu mining and stick to cpu.. it will work then

Hello
I'am planning on buying R7 370 this day but i want to know if how much sol/s will i get?

if i buy r7 370
here will be my specs
i5 4590
4gb ram
r7 370

my gtx 750 1gb and i5 sol/s is ranging form 16-19sol/s
i just want to know how much difference if i cahng my gtx 750 to r7 370
tahnks!

Why do you want to buy an R7 370 ? It's pretty useless unless you take it in 4Gb version, but if you do so, you better take an RX 470 because of the price.

Operation Sysytem :  Win 7 pro
Wallet : poloniex
Miner : nicehash
Pool: supranova
CPU (if you mining with cpu): i5 3570k @ 4.4 ghz (4 core no ht, all cores used)
CPU Speed : 19.x sol/sec

Operating Sysytem:  ethOS 1.1.4 (Ubuntu 14.04.5 LTS)
Wallet: Self
Miner: silentarmy v3
Pool: http://zcash.flypool.org
GPU: 1 x MSI R7 370 Gaming 4GB w/ clocks 1175/1500
GPU Speed: 25.x sol/sec

Using Claymore 2.0, was using 1.1 getting 185h/s....

Now getting between:

200h/s to 208h/s on 4 R9 290s
2 standard Shappire R290's. Red ones,
1 Asus R9 290 OC & 1 Asus R9 290x getting close to 55h/s on this one but most vary between 47-53h/s........

is anyone experiencing any unpaid balance issues flycastpool unpaid balance  not increasing for over an hour

Operation Sysytem :  Win10 64bit
Wallet : Kraken
Miner : nheqminer_suprnova 0.4b
Speed : 2 - 2.5 Sols/s
Pool: https://zec.suprnova.cc/
VGA Card(s) GPU/Mem : Nvidia Geforce 540M 2GB
VGA driver : 370.x.x
Bat or start file settings : nheqminer -u (username) -p (pwd) -t 0 -cd 0 -cv 0

CPU : i7-2630QM 2GHz
CPU Mining Speed : 11 - 12 Sols/s
Bat or start file settings : nheqminer -u (username) -p (pwd) -t 8

Operation Sysytem :  Win 10 64bit
Wallet : Poloniex
Miner : Claymore's ZCash AMD GPU Miner v2.0 Beta
Speed : 48-53 sol/s (+- 70 Sol/s with CPU)
Pool: https://zec.suprnova.cc/
VGA Card(s) Sapphire RX480 Nitro + 8gb
VGA driver : 16.7.3
Bat or start file settings :
genoli : ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal "User" -zpsw "Password" -allpools 1

CPU (if you mining with cpu): i7 3770k (stock clocks)
CPU Mining Speed : 20 Sol/s

RIG 1:

Prosessor+Ram: Intel E8400 + 2gig
Operation System :  Win 8.1 64bit
Miner : Claymore's ZCash AMD GPU Miner v2.0 Beta -> Updated to Claymore 3.1 -> Updated to Claymore 5.0
Speed : 52Sols/s + 48 Sols = 100Sols/s -> 65 + 58 = 123 Sols/s -> 111 + 100 = 211 Sols/s
Pool: https://miningpoolhub.com/
VGA Card(s) MSI 290x & Asus 290 (1030/1250)
VGA driver : 15.12
Bat or start file settings :
ZecMiner64.exe  -dbg -1 -mport -3333 -zpool europe.equihash-hub.miningpoolhub.com:20570 -zwal USER.MINER -zpsw x

RIG 2:

Prosessor+Ram: AMD x2 4400+ + 2gig
Operation System :  Win 7 Pro 64bit
Miner : Claymore's ZCash AMD GPU Miner v2.0 Beta -> Updated to Claymore 3.1 ->  -> Updated to Claymore 5.0
Speed :  47 + 50 + 41 = 138 Sols/s ->48 + 55 + 56 = 159 Sols/s -> 90 + 95 + 96 = 281 Sols/s
Pool: https://miningpoolhub.com/
VGA Card(s)  XFX 280, 7950 & 7950 (900/1500)
VGA driver : 15.12
Bat or start file settings :
ZecMiner64.exe  -dbg -1 -mport -3333 -zpool europe.equihash-hub.miningpoolhub.com:20570 -zwal USER.MINER -zpsw x

Operation Sysytem :  Win10 64bit
Wallet : Kraken
Miner : nheqminer_v0.3a_suprnova
Speed : 8.5-9 Sols/s -t3  //  10-12 Sols/s -t4
Pool: https://zec.suprnova.cc/
CPU: 3rd generation Intel® Core™ i7 Quad Core / Laptop " Sony SVZ1311BGXXI

Have you tried -t 6 or -t 7 setting?

RIG:

Operation System :  Win 10 64bit
Miner: Claymore's ZCash AMD GPU Miner v4.0 Beta ->
Speed: 40-45 Sol/s/Card => 270 Sols/s/Rig
Pool: http://zcash.flypool.org/
VGA Cards: 6x Sapphire R9 Nitro 380X
VGA driver : 15.12
Wallet: Poloniex

My rig

PSU: Corsair VS 550 WATT
MOBO: MSI PRO 110H -D
CPU: I3 6100 DUALCORE + DUAL HYPERTHREAD
RAM: 16 GB DDR4 G.SKILL
GPU: NONE YET (WAITING FOR THAT RX 460)
SSD: TOSHIBA 120 GB

I get 3 Sol/s from first CPU and about 5.5 Sol/s from second cpu
Mining at Zecsupernova.cc pool through nicehash nqe miner

Based on what I have seen here, I should not regret, it's a good power to get about 9 sol/s with only cpu mining.

2 X r9 280x stock bios
total 140 s/sec
550W (< this!)
suprnova pool
slow amd cpu
windows 10
claymore v4.0

edit: basically the watt's are way too high.  So I'm going to modify the bios of the 2 cards and undervolt them.

coinmine.pl features 7,702 workers with some whopping 5,130,227.894 Sol/s or let's calculate 666 Sol/s on each.

... ask the devil why they are so much more efficient. I smell fish.

I'm using 2 rigs, both using the simpleminer OS (custom linux build from simpleminer.com) and the optiminer Mining software.

1st rig is 2x 290, 2 x 290x, 1 x 390  -  820 sol/s

2nd rig is 3 x 290, 2x 380  -  620 sol

Also using a python based cuda miner using silent army in Win10 with a gtx 1070 (overclocked memory +500) getting about 88 sol
Same computer using a forked nheqminer with silent army on 3 threads of a core i5 4690k gets 17 sol

Mining to a poloniex exchange wallet, all miners pointed to nanopool.

Operation Sysytem :  Win 8.1 64bit
Wallet : Using pool
Miner : claymore 6.0
Speed : 110-115 Sol/s
Pool: https://pool.mn/zclassic
VGA Card(s) GPU/Mem: ASUS R9 280X  x 1
VGA driver : 16.10.3
Bat or start file settings : ZecMiner64.exe -zpool %POOL% -zwal bobben.3 -zpsw x -cclock 990 -mclock 1550 -i 1 -allpools 1
Watts at wall: 190W
BIOS mod: Undervolt to core to 987mV upto 1GHz, copied memory timing strap 1500 -> 1625
Card ASIC quality: 59.6%

EDIT: The pool doesnt see the same hash rate as that reported by the miner.
Either shitty pool or the claymore miner reported hasrate is inflated?

with -t 4 i got 12-13 Sols/s cpu core temps are around 75-80 celsius /  ambient temp : 24 celsius
with -t 6 i got 16.5 Sols/s stable , cpu core temps are around 80 celsius /  ambient temp : 24 celsius
with -t 7 i got 16.8 - 17.5 Sols/s  , cpu core temps are around 85 celsius /  ambient temp : 24 celsius
with -t 8 i got 17.5-18.9 Sols/s , cpu core temps are around 85 celsius /  ambient temp : 24 celsius , killed one OEM SONY AC adapter already with -t 8 setting :(

one worker can have unlimited number of Rigs/GPUs under it so your math are meaningless

OS: Win 10
PSU: Corsair 2x 850 WATT and 1x HP Server PSU
GPU: 14x AMD RX 40
HASH: 560

Win 7 64 bit
Fx 6300 @ 4ghz
16GB ddr3 1866
Evga gtx 970 acx 2.0 ~150Sols/s 1030/3004 @~56C 70% fanspeed.

Suprnova us  zec pool

I would say I can get a very nice numbers from my (average) system.
Everything is in factory settings, because I have problem with cooling, so I can't really go higher.
If I would solve a better cooling, I could get even higher sol/s on the current hardware.

OS :  Win 10 64bit
Wallet : pool wallet
Miner : EWBF's CUDA Zcash miner / Version 0.0.6b
Speed : 40-50 sol/s
Pool: zcash.flypool.org
VGA Card GPU/Mem: GTX 760 2GB
VGA driver : 376.33 nvidia driver, CUDA 8.0
Bat : miner.exe --server eu1-zcash.flypool.org:3333 --user address.user --pass x --port 3333


CPU : Intel Core i5 4670 3,40GHz
Miner : nheqminer_0.3a
Pool: zcash.flypool.org
CPU Mining Speed : ~20 sol/s (4 cores/threads)
Bat : nheqminer.exe -l eu1-zcash.flypool.org:3333 -u address.user

measured max hashrate on flypool: 70 H/s

Operation Sysytem :  Win10 64bit
Wallet : Kraken
Miner : EWBF's Zcash cuda miner Zec miner 0.0.8b
Speed : 275-280 Sols/s
Pool: http://zcash.flypool.org/
VGA Crad: Asus GTX980 reference
VGA Driver: 376.33
bat file : miner --server us1-zcash.flypool.org --port 3333 --user zcashaddress.username --pass x --P 0

Running stable 275-280Sols/s with the latest EWBF's Zcash cuda miner version 0.0.8b
Vga card fine tuned with Asus Gpu Tweak II , version 1.3.3.2
http://beszeljukmeg.com/zcash/zcashGTX980.JPG

http://imgur.com/a/yGCVo How do you post inline image??

Hardware:
-----------
GFX: MSI GTX 970 4GB (Driver version 376.33)
CPU: Intel i7 3770K
Memory: 16GB
OS: Windows 10 x64

Software:
-----------
NiceHash Miner v1.7.3.12 (eqm_v1.0.4b)

Hashrates:
-------------
GFX: 275 Sols/s

You have to have more post in the forum for the picture to display directly in your post, otherwise you just get a link.

GFX : 6x GTX 1070 EVGA FTW (+150/600 - TDP 50% - 695w @ wall)
CPU : intel celeron 3780
Memory : 4GB
OS windows 10 x64 pro anniversary

Nicehash miner eqm 1.0.4b / hashrate 2400sols/s (about 400 per card)
EWBF 0.0.9b / hashrate 2350sols/s (about 390 per card)

Pool Nicehash for EQM and Flypool for EWBF

So can anybody tell me is it still worth mining this coin?
Or better switch back to ETH?
Im getting 28Sols on I7 @ 4.2ghz
And 70 from an GTX680 default clocks
while a GTX 450 does only 14-15

Kr

These two cards are not good for mining anyway.

OS :  Win 10 64bit
Miner : EWBF's Zcash cuda miner Zec miner 0.0.9b
Speed : 1540 Sol/s
Pool: flypool
VGA Card(s) GPU/Mem: 4X GTX1070
VGA driver :376.33
OC: PL 70% - Core +200 - Mem +600

(I am a noob but what do the acronyms or abbreviations "PL" and "Core" and "Mem" mean?)


I have several more noob questions:

What kind of Power Supply Unit (PSU) are you using?

What kind of motherboard are you using?

And how much RAM do you have on that motherboard?

Are you using USB PCI extender cables and/or do you think that efficiency would be significantly crippled if your were to do so?

I am looking to setup a very similar rig however on Linux, I am considering putting 6 GTX 1070s on a single motherboard with a 1500W PSU. Do you have any advice or comments on whether this rig with 6 GPU would be an efficient setup?

Thanks for all the help in advance!

If you want to have a mining rig for mining altcoins you have to buy a good motherboard which supports at least 3 graphic cards(up to six I know) (one such being Asrock H81 PRO BTC).

You need to have a really good PSU, 1200-1500 Watt EVGA or any other well known brand.

You can make this rig with 6GTX 1070 with the same motherboard I have suggested (just read a bit more in google) and a 1500 W PSU should do better. A better one would be 6 RX 480 since they are cheaper and consume less energy and hash power for mining zec is almost the same.

I have no clue about the extenders though.

I would like to get into mining so these specs are just what I will follow to get into it and start mining ZEC with.
But one question would be: Would I need more than just 1500 Watt ps if I wanted to put 6x1070 cards on one board? Don't they take more than 250 watts of power each? Just to be on the safe side to not be stingee if I want to overclock them for more hash power. ;D

if you want to overclock your card for mining to get better hashrate, its better if you learn how to undervolt your cards if you have to pay for eletricity :) , if you dont have to pay for electricity , ignore my suggestion ;) but you should consider all this :

For calculating your mining income , possible profitability you need to know a few things :

How much $ is your mining PC ?
What is the total power draw for your system at the wall ?
How much $/kwh you paying for electricity included tax and another fees ?
What is the max hashrate you can get from ur rig ?
What wallet / exchage you going to use (what % they charging you for exchange ) ?
What mining software are you going to use ? ( its free or have some % developer fee )
What pool are u going to use ? ( pool fee% )
What ROI (return of investment) do you prefer ...

what any of the calculators telling you today , that is just for today ... if the difficulty going higher , your ROI can be doubled easy and ur mined coin going to be less ....
when you have all this information , you can use any mining calculator
there is a few example's :
for eth:
http://www.coinwarz.com/calculators/ethereum-mining-calculator
for zcash:
http://www.coinwarz.com/calculators/zcash-mining-calculator
for xmr
http://www.coinwarz.com/calculators/monero-mining-calculator

 

Electricity costs wont be considered a problem in the area I live in. ;)
So give me an alternative scenario for the maximum hash rate with overclocking these cards.

ZEC Mining Really go well today!

0.13476398  from Genesis Mining (Cloud mining) whit 1000 hash/s

Happy day`s!

 :)
http://i6.photobucket.com/albums/y213/Zeta_0049/Zcash%20income_1.jpg (http://s6.photobucket.com/user/Zeta_0049/media/Zcash%20income_1.jpg.html)

Hi, new here!
Just started mining two days ago.  Getting just over 11,000 Sol/s

https://i.imgur.com/9YvedXE.png

I run a lan gaming center.  Recently upgraded all the video cards to GTX 1060 so I thought I'd give crypto mining a try.
Using the "NiceHash EQM Zcash NVIDIA optimized Miner eqm_v1.0.4c_Win64"

Our Hashing power is doing great guys!