Bitcoin Forum

Bitcoin => Hardware => Topic started by: flameruk on November 04, 2016, 07:35:22 PM



Title: S7 Replacement Fan UK
Post by: flameruk on November 04, 2016, 07:35:22 PM
Hi.
I have an S7 that needs a new fan.
Any ideas of a compatible fan I can buy in the UK?
Can solder bare wires if necessary and don't care about noise.
Thanks.


Title: Re: S7 Replacement Fan UK
Post by: flameruk on November 04, 2016, 08:28:23 PM
Hi.
I have an S7 that needs a new fan.
Any ideas of a compatible fan I can buy in the UK?
Can solder bare wires if necessary and don't care about noise.
Thanks.

Delta PFB1212UHE looks good. Is it ok to tie the +12v and ground straight to a PSU and tie the tachometer and Pwm feeds to the miner?


Title: Re: S7 Replacement Fan UK
Post by: HagssFIN on November 04, 2016, 08:34:39 PM
Hi.
I have an S7 that needs a new fan.
Any ideas of a compatible fan I can buy in the UK?
Can solder bare wires if necessary and don't care about noise.
Thanks.

Delta PFB1212UHE looks good. Is it ok to tie the +12v and ground straight to a PSU and tie the tachometer and Pwm feeds to the miner?
Why in earth would you need to do that?  ???
Just plug the 4-pin connector to the controller and let it spin.

Yes, that Delta fan is a good one.

This Sanyo fan is a good alternative as well.
https://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O/ref=sr_1_1?s=pc&ie=UTF8&qid=1478291846&sr=1-1&keywords=sanyo+san+ace+120


Title: Re: S7 Replacement Fan UK
Post by: flameruk on November 04, 2016, 09:41:36 PM
Hi.
I have an S7 that needs a new fan.
Any ideas of a compatible fan I can buy in the UK?
Can solder bare wires if necessary and don't care about noise.
Thanks.

Delta PFB1212UHE looks good. Is it ok to tie the +12v and ground straight to a PSU and tie the tachometer and Pwm feeds to the miner?
Why in earth would you need to do that?  ???
Just plug the 4-pin connector to the controller and let it spin.

Yes, that Delta fan is a good one.

This Sanyo fan is a good alternative as well.
https://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O/ref=sr_1_1?s=pc&ie=UTF8&qid=1478291846&sr=1-1&keywords=sanyo+san+ace+120

Wasn't sure if the S7 controller PCB can take the extra load drawn by the Delta fan.


Title: Re: S7 Replacement Fan UK
Post by: HagssFIN on November 04, 2016, 09:46:15 PM
Hi.
I have an S7 that needs a new fan.
Any ideas of a compatible fan I can buy in the UK?
Can solder bare wires if necessary and don't care about noise.
Thanks.

Delta PFB1212UHE looks good. Is it ok to tie the +12v and ground straight to a PSU and tie the tachometer and Pwm feeds to the miner?
Why in earth would you need to do that?  ???
Just plug the 4-pin connector to the controller and let it spin.

Yes, that Delta fan is a good one.

This Sanyo fan is a good alternative as well.
https://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O/ref=sr_1_1?s=pc&ie=UTF8&qid=1478291846&sr=1-1&keywords=sanyo+san+ace+120

Wasn't sure if the S7 controller PCB can take the extra load drawn by the Delta fan.

Safe bet would be to go with either this Sanyo 9GV1212P1J01 fan https://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O/ref=sr_1_1?s=pc&ie=UTF8&qid=1478291846&sr=1-1&keywords=sanyo+san+ace+120

or with this Delta fan model Delta QFR1212GHE https://shop.bitmain.com/productDetail.htm?pid=00020160814133410005F5UJ445Q05EF
http://www.digikey.com/product-detail/en/delta-electronics/QFR1212GHE-SP01/603-1165-ND/1850534


Title: Re: S7 Replacement Fan UK
Post by: flameruk on November 05, 2016, 02:54:26 PM
Hi.
I have an S7 that needs a new fan.
Any ideas of a compatible fan I can buy in the UK?
Can solder bare wires if necessary and don't care about noise.
Thanks.

Delta PFB1212UHE looks good. Is it ok to tie the +12v and ground straight to a PSU and tie the tachometer and Pwm feeds to the miner?
Why in earth would you need to do that?  ???
Just plug the 4-pin connector to the controller and let it spin.

Yes, that Delta fan is a good one.

This Sanyo fan is a good alternative as well.
https://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O/ref=sr_1_1?s=pc&ie=UTF8&qid=1478291846&sr=1-1&keywords=sanyo+san+ace+120

Wasn't sure if the S7 controller PCB can take the extra load drawn by the Delta fan.

Safe bet would be to go with either this Sanyo 9GV1212P1J01 fan https://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O/ref=sr_1_1?s=pc&ie=UTF8&qid=1478291846&sr=1-1&keywords=sanyo+san+ace+120

or with this Delta fan model Delta QFR1212GHE https://shop.bitmain.com/productDetail.htm?pid=00020160814133410005F5UJ445Q05EF
http://www.digikey.com/product-detail/en/delta-electronics/QFR1212GHE-SP01/603-1165-ND/1850534

Thanks. Ive found stock of the QFR1212GHE in the UK so Im going to order four of those, keep a few spare.