Title: Proper Overclocking for Mining..? Post by: gateway on April 04, 2013, 05:59:47 PM I was wondering after doing a bit of research the proper way to deal with over clocking for mining specifically.
I just bought a card that has voltage unlocked and I have been reading forms that changing the following helps increase hash rates * Core Clock * Memory * Voltage Some settings I have seen and well tested on a older card where Core = 980 Memory = 300 Voltage = default So what settings do I adjust first to see about increasing hash rates, keeping the system stable and the heat down.. For example do I push core to 1000 keep everything set, or when I push core do I need to adjust memory up or down and or voltage. Can some kind sole explain how this is best done in steps.. Title: Re: Proper Overclocking for Mining..? Post by: wowfreaks22 on April 04, 2013, 07:35:19 PM try 1.012 volt for 1000core
Title: Re: Proper Overclocking for Mining..? Post by: gateway on April 04, 2013, 07:53:27 PM Is their some sort of guide for when you need to adjust and what to adjust? I could play with settings all day long but the question is if I push the clock rate do I need to adjust the volts?
|