Bitcoin Forum

Bitcoin => Mining speculation => Topic started by: silzero on April 05, 2013, 02:36:50 PM



Title: Failure rate of Avalon ASIC hardware
Post by: silzero on April 05, 2013, 02:36:50 PM
Hi,
Now that at least 300 Avalon ASIC systems are out. Anyone have a confirmed count of how many failed due to heat or other issues? What is the average expected lifespan of one Avalon ASIC system?

-SZ


Title: Re: Failure rate of Avalon ASIC hardware
Post by: silzero on April 06, 2013, 03:02:11 AM
No failures, huh?


Title: Re: Failure rate of Avalon ASIC hardware
Post by: k9quaint on April 06, 2013, 04:15:18 AM
No failures, huh?

BFL has enough fail for all the ASIC vendors.


Title: Re: Failure rate of Avalon ASIC hardware
Post by: Beta-coiner1 on April 06, 2013, 04:17:16 AM
If you read through the forums you'll find the hardware seems quite reliable.The main problems I've seen people mention were mainly software related or a simple restart cured the issue.I believe I've seen it mentioned that BFL will not allow overclocked hardware...while Avalon currently allows that.


Title: Re: Failure rate of Avalon ASIC hardware
Post by: PatMan on April 08, 2013, 11:10:43 PM
Time will tell, it's early doors yet.


Title: Re: Failure rate of Avalon ASIC hardware
Post by: SolarSilver on April 09, 2013, 10:45:16 AM
Now that at least 300 Avalon ASIC systems are out. Anyone have a confirmed count of how many failed due to heat or other issues? What is the average expected lifespan of one Avalon ASIC system?
I have a couple of systems running now for exactly 30 days and they perform flawlessly. 20 days of their lifespan they have been running at 300 MHz without problems. Some run even the original firmware from Feb, one runs the latest firmware for testing.

I see occasional restarts of the cgminer processor on the experimental one and still try to figure out why it's doing that but restarting solves the issue anyways:

Quote
20130330-010001 cgminer restart
20130331-073001 cgminer restart
20130401-073501 cgminer restart
20130404-193501 cgminer restart
20130405-131001 cgminer restart
20130406-104501 cgminer restart
20130407-194001 cgminer restart

https://i.imgur.com/UODrqb2.png

From other users postings I think no systems have failed due to heat or other issues. A few systems were crippled due to transport dislodging cables. One guy had a flaky power supply, easy to fix. One guy had a bad TP-LINK TL-WR703N but was able to merge the modules to another Avalon he had running.

But once the systems are up and mining they are rock solid. Mostly because they running really cool, the input temp is 26 degrees Celcius and the output is only 44 degrees. Compare that to some of the GPU setups....

(So OK, it's only 7 degrees out here, we'll see what the summer brings once it's 30 degrees and warmer)