Title: Garden Party - New minting machine build Post by: Operatr on April 06, 2013, 11:27:35 PM BlockBurner's first mining machine is in the works, built with budget and utility in mind as our master plan unfolds. Not content to have some hacked together mess of GPUs and wires on a baker's rack like many GPU miners out there, I wanted a custom solution. Because I've always been a builder and computer modder, I'm going to have a little fun with it too by scratch building an optimal case instead of off the rack, because why the hell not. My partner has dubbed our dedicated mining rig "Garden Party".
True enough, in a few months ASIC will begin a strong ground campaign that will put rigs like this into the ground for Bitcoin, though when those ASICs will be around in quantity is anyone's guess, so GPU mining is still the only way for the vast majority of us. Though later when ASICs do take over (eagerly awaiting our Butterfly Labs SC line to ship in), GPUs will find a new home in minting other cryptocurrencies like Litecoin as nothing close to ASIC type specialty hardware exists for them yet. The goal here is to create a solid rig that can perform well in all mining types. Gigabyte AM3+ motherboard with 4x PCIe x16 slots, and a Silverstone 850w power supply to feed those hungry GPUs. Processor is a humble Sempron 145 as it won't be doing much more than running the mining programs coupled with 2Gb of bottom barrel GSkill DDR3 memory. I may increase this soon just because it is cheap, and possibly running a CryptoStore virtual machine. The VM would be better suited to run off of a proper server, but we're not there yet... The frame will be made out of L aluminum stock found at most hardware stores Just enough space for the essentials and cooling via several 120mm fans. The power supply I have decided will actually be mounted right over the CPU, giving more room for front fan intakes up front.<a The outer casing will be made from 1/4 smoked acrylic plastic, that looks like this. The outer sides will have another plate we will see a little later. After some liberal use of the table saw, all sides cut for the outer case. More to come soon, and a CNC table router will be involved. Operatr blockburner.net (http://blockburner.net) Title: Re: Garden Party - New minting machine build Post by: aqrulesms on April 07, 2013, 12:04:33 AM Looks great, I wish you the best. How much would you sell each of these units for?
;D Title: Re: Garden Party - New minting machine build Post by: Operatr on April 07, 2013, 12:22:59 AM Looks great, I wish you the best. How much would you sell each of these units for? ;D Thanks! 8) This is just a single project though if there is interest in something similar in a production version I will definitely start looking into that. Production Litecoin miners would be where something like this would fit in later on as Bitcoin outgrows GPUs with ASIC hardware. Litecoin is still heavily done with GPUs and will be for the foreseeable future as going full tilt is still way too expensive to justify for Litecoins and other currencies. There is a business aspect I'm working on to go along with this, a brand new tech industry. Title: Re: Garden Party - New minting machine build Post by: Bendex on April 07, 2013, 08:34:38 AM Looks very time consuming for you to build each one. How many can you make per day?
You should just start building them and put them on eBay one at a time. Title: Re: Garden Party - New minting machine build Post by: Operatr on April 07, 2013, 07:22:36 PM Looks very time consuming for you to build each one. How many can you make per day? You should just start building them and put them on eBay one at a time. It would be for sure if I were going production with these, but this one is more of a custom case project that is geared toward mining. I have started looking into the tooling for production Litecoin miners however ;D |