Title: Passphrase rejected and Armory fails to restore backup Post by: daveraye on December 31, 2016, 01:00:38 PM I've had several issues using Armory, but now I have a major problem. Installed Bitcoin Core and Armory a little over a week ago. Downloaded Blockchain. Armory won't run Bitcoin in background, but got it to initialize. I successfully restored a 2 year old paper backup and it reported balance in that one wallet. I sent BTC from an exchange and Armory received it. I encrypted the wallet and wrote down passphrase. I made a new backup of the wallet and it returned message All Other Backups Deleted. Backup test was successful. When I went to make a payment, it returns Passphrase Is Incorrect. (highly unlikely, as you type it in 3 times for confirmation and I immediately wrote it down). I cannot unlock this wallet, so I attempted to restore it from my new backup. When I enter the key, Armory stalls/freezes. I've tried this several times, Online and Offline, with Antivirus disabled, etc. I've tried pasting and typing the key. I've run the Factory Reset with light option, and then middle option to rescan & rebuild, but not the blockchain. I created a new empty wallet, and it seems to function properly.
I haven't uninstalled/reinstalled Armory. When started, it reports All Wallets Are Consistent, and the balance is correct. What now? Why won't it restore my wallet from my backup? P.S. - where is official help from Armory developers? Title: Re: Passphrase rejected and Armory fails to restore backup Post by: achow101 on December 31, 2016, 04:26:07 PM Log files please.
P.S. - where is official help from Armory developers? "Official" help is right here on this forum. There is only one full time Armory developer and he does not have the time nor resources to set up any other "official" help channel for tech support. Your help will come from both him and a few others here who volunteer contributions to Armory or are experienced and know Armory fairly well.Title: Re: Passphrase rejected and Armory fails to restore backup Post by: daveraye on December 31, 2016, 05:17:28 PM Thanks so much for your help & Happy New Year btw!
P.S. The root key in the new backup file does match the one from the original backup of 2 years ago. LOG FILE (edited to remove redundant errors) pBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:10 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded ******** RECURRING ERROR 2016-12-31 09:12 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:12 (INFO) -- ArmoryQt.py:6366 - BDM state is scanning -- force shutdown BDM 2016-12-31 09:12 (INFO) -- SDM.pyc:588 - Called stopBitcoind 2016-12-31 09:12 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:12 (INFO) -- ArmoryQt.py:6386 - Attempting to close the main window! 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1137 - C++ block utilities loaded successfully 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1247 - 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1248 - 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1249 - 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1250 - ************************************************************ 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1251 - Invoked: C:\Program Files\Armory\ArmoryQt.exe --datadir=D:\Coinage\Armory 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1252 - ************************************************************ 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1253 - Loading Armory Engine: 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1254 - Armory Version : 0.95.1 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1255 - Armory Build: : 374672b751 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1256 - PyBtcWallet Version : 1.35 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1257 - Detected Operating system: Windows 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1258 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1259 - User home-directory : C:\Users\Delta Romeo\AppData\Roaming 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1260 - Satoshi BTC directory : C:\Users\Delta Romeo\AppData\Roaming\Bitcoin\ 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1261 - Armory home dir : D:\Coinage\Armory 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1262 - Detected System Specs : 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1263 - Total Available RAM : 15.95 GB 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1264 - CPU ID string : Intel64 Family 6 Model 60 Stepping 3, GenuineIntel 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1265 - Number of CPU cores : 4 cores 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1266 - System is 64-bit : True 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1267 - Preferred Encoding : cp1252 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1268 - Machine Arch : amd64 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1269 - Available HDD (ARM) : 72 GB 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1270 - Available HDD (BTC) : 105 GB 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1271 - 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1272 - Network Name: Main Network 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1273 - Satoshi Port: 8333 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1274 - Do wlt check: True 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1275 - Named options/arguments to armoryengine.py: 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - thread_count : -1 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - rescan : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - ignoreAllZC : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - rescanBalance : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - disableModules : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - port : None 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - interport : 8223 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - skipStatsReport : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - forceWalletCheck: False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - regtest : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - rebuild : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - nettimeout : 2 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - datadir : D:\Coinage\Armory 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - clearMempool : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - offline : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - coverageOutputDir: None 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - armoryDBDir : DEFAULT 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - armorydb_port : 9001 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - satoshiPort : DEFAULT 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - useTorSettings : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - netlog : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - keypool : 100 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - coverageInclude : None 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - forceOnline : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - skipAnnounceCheck: False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - redownload : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - armorydb_ip : 127.0.0.1 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - multisigFile : DEFAULT 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - ram_usage : -1 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - testAnnounceCode: False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - mtdebug : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - logDisable : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - settingsPath : D:\Coinage\Armory\ArmorySettings.txt 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - db_type : DB_FULL 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - doDebug : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - enableDetSign : True 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - disableConfPermis: False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - testnet : False 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - rpcport : DEFAULT 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - satoshiHome : DEFAULT 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - satoshiRpcport : DEFAULT 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - logFile : D:\Coinage\Armory\ArmoryQt.exe.log.txt 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1277 - verbosity : None 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1278 - Other arguments: 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1281 - ************************************************************ 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:1684 - C++ block utilities loaded successfully 2016-12-31 09:13 (INFO) -- BDM.pyc:367 - Using the asynchronous/multi-threaded BlockDataManager. 2016-12-31 09:13 (INFO) -- BDM.pyc:368 - Blockchain operations will happen in the background. 2016-12-31 09:13 (INFO) -- BDM.pyc:369 - Devs: check TheBDM.getState() before asking for data. 2016-12-31 09:13 (INFO) -- BDM.pyc:370 - Registering addresses during rescans will queue them for 2016-12-31 09:13 (INFO) -- BDM.pyc:371 - inclusion after the current scan is completed. 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:3597 - Using settings file: D:\Coinage\Armory\ArmorySettings.txt 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2485 - loadWalletsAndSettings 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2539 - Loading wallets... 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2598 - Number of wallets read in: 2 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2603 - Wallet (2Nb64zHxK): "Mixer reciepts " (No Encryption) 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2603 - Wallet (wceoAnGX): "Coinbase reciepts - wceoAnGX " (Encrypted) 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2153 - Setting up networking... 2016-12-31 09:13 (INFO) -- ArmoryQt.py:1412 - setupUriRegistration 2016-12-31 09:13 (INFO) -- ArmoryQt.py:1480 - Armory already registered for current user. Done! 2016-12-31 09:13 (INFO) -- ArmoryQt.py:546 - Usermode: Advanced 2016-12-31 09:13 (INFO) -- ArmoryQt.py:1708 - Changing usermode: 2016-12-31 09:13 (INFO) -- ArmoryQt.py:1709 - From: Advanced 2016-12-31 09:13 (INFO) -- ArmoryQt.py:1717 - To: Advanced 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2217 - startBitcoindIfNecessary 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2257 - setSatoshiPaths 2016-12-31 09:13 (INFO) -- ArmoryQt.py:2275 - Setting satoshi datadir = D:\Coinage\Bitcoin 2016-12-31 09:13 (INFO) -- SDM.pyc:182 - Found bitcoind in the following places: 2016-12-31 09:13 (INFO) -- SDM.pyc:184 - C:\Program Files\Bitcoin\daemon\bitcoind.exe 2016-12-31 09:13 (INFO) -- SDM.pyc:184 - C:\Program Files\Bitcoin\daemon\bitcoind.exe 2016-12-31 09:13 (INFO) -- SDM.pyc:186 - Using: C:\Program Files\Bitcoin\daemon\bitcoind.exe 2016-12-31 09:13 (INFO) -- SDM.pyc:382 - Reading bitcoin.conf file 2016-12-31 09:13 (INFO) -- SDM.pyc:460 - Called startBitcoind 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:651 - Executing popen: [u'C:\\Program Files\\Bitcoin\\daemon\\bitcoind.exe', u'-datadir=D:\\Coinage\\Bitcoin'] 2016-12-31 09:13 (INFO) -- SDM.pyc:574 - PID of bitcoind: 9864 2016-12-31 09:13 (INFO) -- SDM.pyc:575 - PID of armory: 9784 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:651 - Executing popen: ['.\\guardian.exe', '9784', '9864'] 2016-12-31 09:13 (INFO) -- SDM.pyc:756 - Creating proxy in SDM: host=127.0.0.1, port=8332 2016-12-31 09:13 (INFO) -- ArmoryQt.py:5542 - Dashboard switched to auto-InitSync 2016-12-31 09:13 (INFO) -- ArmoryUtils.pyc:3762 - Another Armory instance just tried to open. 2016-12-31 09:13 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:13 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk ********* RECURRING ERROR 2016-12-31 09:17 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:17 (INFO) -- ArmoryQt.py:6366 - BDM state is scanning -- force shutdown BDM 2016-12-31 09:17 (INFO) -- SDM.pyc:588 - Called stopBitcoind 2016-12-31 09:17 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:17 (INFO) -- ArmoryQt.py:6386 - Attempting to close the main window! 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1137 - C++ block utilities loaded successfully 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1247 - 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1248 - 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1249 - 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1250 - ************************************************************ 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1251 - Invoked: C:\Program Files\Armory\ArmoryQt.exe --datadir=D:\Coinage\Armory 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1252 - ************************************************************ 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1253 - Loading Armory Engine: 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1254 - Armory Version : 0.95.1 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1255 - Armory Build: : 374672b751 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1256 - PyBtcWallet Version : 1.35 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1257 - Detected Operating system: Windows 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1258 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1259 - User home-directory : C:\Users\Delta Romeo\AppData\Roaming 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1260 - Satoshi BTC directory : C:\Users\Delta Romeo\AppData\Roaming\Bitcoin\ 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1261 - Armory home dir : D:\Coinage\Armory 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1262 - Detected System Specs : 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1263 - Total Available RAM : 15.95 GB 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1264 - CPU ID string : Intel64 Family 6 Model 60 Stepping 3, GenuineIntel 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1265 - Number of CPU cores : 4 cores 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1266 - System is 64-bit : True 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1267 - Preferred Encoding : cp1252 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1268 - Machine Arch : amd64 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1269 - Available HDD (ARM) : 72 GB 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1270 - Available HDD (BTC) : 104 GB 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1271 - 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1272 - Network Name: Main Network 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1273 - Satoshi Port: 8333 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1274 - Do wlt check: True 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1275 - Named options/arguments to armoryengine.py: 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - thread_count : -1 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - rescan : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - ignoreAllZC : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - rescanBalance : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - disableModules : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - port : None 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - interport : 8223 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - skipStatsReport : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - forceWalletCheck: False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - regtest : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - rebuild : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - nettimeout : 2 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - datadir : D:\Coinage\Armory 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - clearMempool : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - offline : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - coverageOutputDir: None 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - armoryDBDir : DEFAULT 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - armorydb_port : 9001 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - satoshiPort : DEFAULT 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - useTorSettings : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - netlog : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - keypool : 100 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - coverageInclude : None 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - forceOnline : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - skipAnnounceCheck: False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - redownload : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - armorydb_ip : 127.0.0.1 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - multisigFile : DEFAULT 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - ram_usage : -1 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - testAnnounceCode: False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - mtdebug : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - logDisable : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - settingsPath : D:\Coinage\Armory\ArmorySettings.txt 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - db_type : DB_FULL 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - doDebug : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - enableDetSign : True 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - disableConfPermis: False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - testnet : False 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - rpcport : DEFAULT 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - satoshiHome : DEFAULT 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - satoshiRpcport : DEFAULT 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - logFile : D:\Coinage\Armory\ArmoryQt.exe.log.txt 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1277 - verbosity : None 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1278 - Other arguments: 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1281 - ************************************************************ 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:1684 - C++ block utilities loaded successfully 2016-12-31 09:18 (INFO) -- BDM.pyc:367 - Using the asynchronous/multi-threaded BlockDataManager. 2016-12-31 09:18 (INFO) -- BDM.pyc:368 - Blockchain operations will happen in the background. 2016-12-31 09:18 (INFO) -- BDM.pyc:369 - Devs: check TheBDM.getState() before asking for data. 2016-12-31 09:18 (INFO) -- BDM.pyc:370 - Registering addresses during rescans will queue them for 2016-12-31 09:18 (INFO) -- BDM.pyc:371 - inclusion after the current scan is completed. 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:3597 - Using settings file: D:\Coinage\Armory\ArmorySettings.txt 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2485 - loadWalletsAndSettings 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2539 - Loading wallets... 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2598 - Number of wallets read in: 2 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2603 - Wallet (2Nb64zHxK): "Mixer reciepts " (No Encryption) 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2603 - Wallet (wceoAnGX): "Coinbase reciepts - wceoAnGX " (Encrypted) 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2153 - Setting up networking... 2016-12-31 09:18 (INFO) -- ArmoryQt.py:1412 - setupUriRegistration 2016-12-31 09:18 (INFO) -- ArmoryQt.py:1480 - Armory already registered for current user. Done! 2016-12-31 09:18 (INFO) -- ArmoryQt.py:546 - Usermode: Advanced 2016-12-31 09:18 (INFO) -- ArmoryQt.py:1708 - Changing usermode: 2016-12-31 09:18 (INFO) -- ArmoryQt.py:1709 - From: Advanced 2016-12-31 09:18 (INFO) -- ArmoryQt.py:1717 - To: Advanced 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2217 - startBitcoindIfNecessary 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2257 - setSatoshiPaths 2016-12-31 09:18 (INFO) -- ArmoryQt.py:2275 - Setting satoshi datadir = D:\Coinage\Bitcoin 2016-12-31 09:18 (INFO) -- SDM.pyc:182 - Found bitcoind in the following places: 2016-12-31 09:18 (INFO) -- SDM.pyc:184 - C:\Program Files\Bitcoin\daemon\bitcoind.exe 2016-12-31 09:18 (INFO) -- SDM.pyc:184 - C:\Program Files\Bitcoin\daemon\bitcoind.exe 2016-12-31 09:18 (INFO) -- SDM.pyc:186 - Using: C:\Program Files\Bitcoin\daemon\bitcoind.exe 2016-12-31 09:18 (INFO) -- SDM.pyc:382 - Reading bitcoin.conf file 2016-12-31 09:18 (INFO) -- SDM.pyc:460 - Called startBitcoind 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:651 - Executing popen: [u'C:\\Program Files\\Bitcoin\\daemon\\bitcoind.exe', u'-datadir=D:\\Coinage\\Bitcoin'] 2016-12-31 09:18 (INFO) -- SDM.pyc:574 - PID of bitcoind: 9748 2016-12-31 09:18 (INFO) -- SDM.pyc:575 - PID of armory: 3116 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:651 - Executing popen: ['.\\guardian.exe', '3116', '9748'] 2016-12-31 09:18 (INFO) -- SDM.pyc:756 - Creating proxy in SDM: host=127.0.0.1, port=8332 2016-12-31 09:18 (INFO) -- ArmoryQt.py:5542 - Dashboard switched to auto-InitSync 2016-12-31 09:18 (INFO) -- ArmoryUtils.pyc:3762 - Another Armory instance just tried to open. 2016-12-31 09:18 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded ********* DITTO Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:18 (INFO) -- ArmoryQt.py:6366 - BDM state is scanning -- force shutdown BDM 2016-12-31 09:18 (INFO) -- SDM.pyc:588 - Called stopBitcoind 2016-12-31 09:18 (ERROR) -- SDM.pyc:791 - ValueError in bkgd req top blk Traceback (most recent call last): File "SDM.pyc", line 765, in __backgroundRequestTopBlock File "bitcoinrpc_jsonrpc\authproxy.pyc", line 105, in __call__ File "json\__init__.pyc", line 351, in loads File "json\decoder.pyc", line 366, in decode File "json\decoder.pyc", line 384, in raw_decode ValueError: No JSON object could be decoded 2016-12-31 09:18 (INFO) -- ArmoryQt.py:6386 - Attempting to close the main window! 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1137 - C++ block utilities loaded successfully 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1247 - 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1248 - 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1249 - 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1250 - ************************************************************ 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1251 - Invoked: C:\Program Files\Armory\ArmoryQt.exe --datadir=D:\Coinage\Armory 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1252 - ************************************************************ 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1253 - Loading Armory Engine: 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1254 - Armory Version : 0.95.1 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1255 - Armory Build: : 374672b751 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1256 - PyBtcWallet Version : 1.35 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1257 - Detected Operating system: Windows 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1258 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1259 - User home-directory : C:\Users\Delta Romeo\AppData\Roaming 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1260 - Satoshi BTC directory : C:\Users\Delta Romeo\AppData\Roaming\Bitcoin\ 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1261 - Armory home dir : D:\Coinage\Armory 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1262 - Detected System Specs : 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1263 - Total Available RAM : 15.95 GB 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1264 - CPU ID string : Intel64 Family 6 Model 60 Stepping 3, GenuineIntel 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1265 - Number of CPU cores : 4 cores 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1266 - System is 64-bit : True 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1267 - Preferred Encoding : cp1252 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1268 - Machine Arch : amd64 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1269 - Available HDD (ARM) : 72 GB 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1270 - Available HDD (BTC) : 104 GB 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1271 - 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1272 - Network Name: Main Network 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1273 - Satoshi Port: 8333 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1274 - Do wlt check: True 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1275 - Named options/arguments to armoryengine.py: 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - thread_count : -1 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - rescan : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - ignoreAllZC : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - rescanBalance : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - disableModules : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - port : None 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - interport : 8223 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - skipStatsReport : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - forceWalletCheck: False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - regtest : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - rebuild : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - nettimeout : 2 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - datadir : D:\Coinage\Armory 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - clearMempool : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - offline : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - coverageOutputDir: None 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - armoryDBDir : DEFAULT 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - armorydb_port : 9001 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - satoshiPort : DEFAULT 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - useTorSettings : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - netlog : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - keypool : 100 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - coverageInclude : None 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - forceOnline : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - skipAnnounceCheck: False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - redownload : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - armorydb_ip : 127.0.0.1 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - multisigFile : DEFAULT 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - ram_usage : -1 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - testAnnounceCode: False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - mtdebug : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - logDisable : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - settingsPath : D:\Coinage\Armory\ArmorySettings.txt 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - db_type : DB_FULL 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - doDebug : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - enableDetSign : True 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - disableConfPermis: False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - testnet : False 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - rpcport : DEFAULT 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - satoshiHome : DEFAULT 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - satoshiRpcport : DEFAULT 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - logFile : D:\Coinage\Armory\ArmoryQt.exe.log.txt 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1277 - verbosity : None 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1278 - Other arguments: 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1281 - ************************************************************ 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:1684 - C++ block utilities loaded successfully 2016-12-31 09:19 (INFO) -- BDM.pyc:367 - Using the asynchronous/multi-threaded BlockDataManager. 2016-12-31 09:19 (INFO) -- BDM.pyc:368 - Blockchain operations will happen in the background. 2016-12-31 09:19 (INFO) -- BDM.pyc:369 - Devs: check TheBDM.getState() before asking for data. 2016-12-31 09:19 (INFO) -- BDM.pyc:370 - Registering addresses during rescans will queue them for 2016-12-31 09:19 (INFO) -- BDM.pyc:371 - inclusion after the current scan is completed. 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:3597 - Using settings file: D:\Coinage\Armory\ArmorySettings.txt 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2485 - loadWalletsAndSettings 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2539 - Loading wallets... 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2598 - Number of wallets read in: 2 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2603 - Wallet (2Nb64zHxK): "Mixer reciepts " (No Encryption) 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2603 - Wallet (wceoAnGX): "Coinbase reciepts - wceoAnGX " (Encrypted) 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2153 - Setting up networking... 2016-12-31 09:19 (INFO) -- ArmoryQt.py:1412 - setupUriRegistration 2016-12-31 09:19 (INFO) -- ArmoryQt.py:1480 - Armory already registered for current user. Done! 2016-12-31 09:19 (INFO) -- ArmoryQt.py:546 - Usermode: Advanced 2016-12-31 09:19 (INFO) -- ArmoryQt.py:1708 - Changing usermode: 2016-12-31 09:19 (INFO) -- ArmoryQt.py:1709 - From: Advanced 2016-12-31 09:19 (INFO) -- ArmoryQt.py:1717 - To: Advanced 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2217 - startBitcoindIfNecessary 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2257 - setSatoshiPaths 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2275 - Setting satoshi datadir = D:\Coinage\Bitcoin 2016-12-31 09:19 (INFO) -- SDM.pyc:382 - Reading bitcoin.conf file 2016-12-31 09:19 (INFO) -- SDM.pyc:756 - Creating proxy in SDM: host=127.0.0.1, port=8332 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2257 - setSatoshiPaths 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2275 - Setting satoshi datadir = D:\Coinage\Bitcoin 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:651 - Executing popen: ['./ArmoryDB.exe', '--db-type="DB_FULL"', '--spawnId="7nhq79xjfMRHS8LU8c5cA8rgHiZGBwvd78G3LbNVpR42"', u'--satoshi-datadir="D:\\Coinage\\Bitcoin\\blocks"', u'--datadir="D:\\Coinage\\Armory"', u'--dbdir="D:\\Coinage\\Armory\\databases"'] 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2307 - Setting netmode: 1 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2289 - loadBlockchainIfNecessary 2016-12-31 09:19 (INFO) -- ArmoryQt.py:2307 - Setting netmode: 1 2016-12-31 09:19 (INFO) -- ArmoryQt.py:5645 - Dashboard switched to "Scanning" mode 2016-12-31 09:19 (INFO) -- ArmoryQt.py:5645 - Dashboard switched to "Scanning" mode 2016-12-31 09:19 (INFO) -- ArmoryUtils.pyc:3762 - Another Armory instance just tried to open. 2016-12-31 10:11 (INFO) -- ArmoryQt.py:2886 - Current block number: 445973 2016-12-31 10:12 (ERROR) -- ArmoryUtils.pyc:3230 - Error in pybkgdthread: Must unlock wallet to change passphrase Traceback (most recent call last): File "armoryengine\ArmoryUtils.pyc", line 3228, in run File "armoryengine\ArmoryUtils.pyc", line 3165, in funcPartial File "qtdialogs.pyc", line 14269, in exec_async WalletLockError: Must unlock wallet to change passphrase 2016-12-31 10:12 (ERROR) -- Traceback (most recent call last): File "qtdialogs.pyc", line 1967, in changeEncryption File "qtdialogs.pyc", line 14253, in exec_ File "armoryengine\ArmoryUtils.pyc", line 3206, in raiseLastError WalletLockError: Must unlock wallet to change passphrase 2016-12-31 10:13 (ERROR) -- ArmoryUtils.pyc:3230 - Error in pybkgdthread: Must unlock wallet to change passphrase Traceback (most recent call last): File "armoryengine\ArmoryUtils.pyc", line 3228, in run File "armoryengine\ArmoryUtils.pyc", line 3165, in funcPartial File "qtdialogs.pyc", line 14269, in exec_async WalletLockError: Must unlock wallet to change passphrase 2016-12-31 10:13 (ERROR) -- Traceback (most recent call last): File "qtdialogs.pyc", line 1967, in changeEncryption File "qtdialogs.pyc", line 14253, in exec_ File "armoryengine\ArmoryUtils.pyc", line 3206, in raiseLastError WalletLockError: Must unlock wallet to change passphrase 2016-12-31 10:14 (INFO) -- ArmoryQt.py:5869 - New Block! : 445978 2016-12-31 10:14 (INFO) -- ArmoryQt.py:5877 - Current block number: 445978 2016-12-31 10:14 (ERROR) -- ArmoryUtils.pyc:3230 - Error in pybkgdthread: Must unlock wallet to change passphrase Traceback (most recent call last): File "armoryengine\ArmoryUtils.pyc", line 3228, in run File "armoryengine\ArmoryUtils.pyc", line 3165, in funcPartial File "qtdialogs.pyc", line 14269, in exec_async WalletLockError: Must unlock wallet to change passphrase 2016-12-31 10:14 (ERROR) -- Traceback (most recent call last): File "qtdialogs.pyc", line 1967, in changeEncryption File "qtdialogs.pyc", line 14253, in exec_ File "armoryengine\ArmoryUtils.pyc", line 3206, in raiseLastError WalletLockError: Must unlock wallet to change passphrase 2016-12-31 10:14 (ERROR) -- ArmoryUtils.pyc:3230 - Error in pybkgdthread: Must unlock wallet to change passphrase Traceback (most recent call last): File "armoryengine\ArmoryUtils.pyc", line 3228, in run File "armoryengine\ArmoryUtils.pyc", line 3165, in funcPartial File "qtdialogs.pyc", line 14269, in exec_async WalletLockError: Must unlock wallet to change passphrase 2016-12-31 10:14 (ERROR) -- Traceback (most recent call last): File "qtdialogs.pyc", line 1967, in changeEncryption File "qtdialogs.pyc", line 14253, in exec_ File "armoryengine\ArmoryUtils.pyc", line 3206, in raiseLastError WalletLockError: Must unlock wallet to change passphrase Log file opened at 1482365394: C:\Users\Delta Romeo\AppData\Roaming\Armory\armorycpplog.txt Log file opened at 1482380029: C:\Users\Delta Romeo\AppData\Roaming\Armory\armorycpplog.txt Log file opened at 1482380057: C:\Users\Delta Romeo\AppData\Roaming\Armory\armorycpplog.txt Log file opened at 1482383630: C:\Users\Delta Romeo\AppData\Roaming\Armory\armorycpplog.txt Log file opened at 1482452713: C:\Users\Delta Romeo\AppData\Roaming\Armory\armorycpplog.txt Log file opened at 1482452982: C:\Users\Delta Romeo\AppData\Roaming\Armory\armorycpplog.txt Log file opened at 1482959468: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1482961930: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1482964610: D:\Coinage\Armory\armorycpplog.txt -ERROR - 1482964615: (..\SwigClient.cpp:61) can't connect socket Log file opened at 1482967726: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1482968749: D:\Coinage\Armory\armorycpplog.txt -ERROR - 1482972075: (..\SocketObject.cpp:438) POLLERR error in readAndWrite Log file opened at 1482972109: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1482976986: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483005671: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483005838: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483013188: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483013283: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483013365: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483032819: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483046444: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483118251: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483121413: D:\Coinage\Armory\armorycpplog.txt -ERROR - 1483121465: (..\SocketObject.cpp:438) POLLERR error in readAndWrite Log file opened at 1483122298: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483187673: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483193357: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483193580: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483193881: D:\Coinage\Armory\armorycpplog.txt Log file opened at 1483193968: D:\Coinage\Armory\armorycpplog.txt Title: Re: Passphrase rejected and Armory fails to restore backup Post by: daveraye on January 02, 2017, 02:29:14 PM Log files please. Hap New Year et al. I uploaded log. Any advise? Would it hurt to use Win Explorer to move wallet.dat from folder and start from scratch? Thanks. Title: Re: Passphrase rejected and Armory fails to restore backup Post by: goatpig on January 02, 2017, 07:45:41 PM Are you trying to restore the wallet while there is a version of it loaded in Armory?
Title: Re: Passphrase rejected and Armory fails to restore backup Post by: daveraye on January 02, 2017, 08:39:31 PM yes - the instruction says I can merge (to reset passphrase and labels) or overwrite. I haven't tried to delete it using Armory because I assume it will require the passphrase, but I can remove it with the file system if you so advise. I would like to know the cause so I can avoid it. Thanks.
Title: Re: Passphrase rejected and Armory fails to restore backup Post by: goatpig on January 02, 2017, 08:52:26 PM You would have to delete the log and reproduce in offline mode for the issue to be clearly isolated. Otherwise, I can't really tell.
Title: Re: Passphrase rejected and Armory fails to restore backup Post by: daveraye on January 03, 2017, 02:58:33 AM I erased the log file and started Armory offline. Then tried the restore wallet function, but it hung up as before, so there was nothing in the log text following initialization.
SOLVED: I then removed the wallet from the folder using file system before running restore again. The restore recalculated addresses, asked for new passphrase and ran to normal completion, after which I sent a payment. I guess we won't learn why it locked up. NOTHING FURTHER Title: Re: Passphrase rejected and Armory fails to restore backup Post by: goatpig on January 03, 2017, 11:10:51 AM I'll have to reproduce the issue on my own. It sounds deterministic enough that I should be able to.
|